[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Paparazzi-devel] On board data logging using TWOG

From: Christophe De Wagter
Subject: Re: [Paparazzi-devel] On board data logging using TWOG
Date: Fri, 10 Aug 2012 08:57:47 +0200

I think it is important because the uplink is decoded with datalink message set and downlink with the telemetry message portion of conf/messages.xml .

On Aug 9, 2012 10:31 PM, "Jamie Yuen" <address@hidden> wrote:
I also had the same issue - sd2log did not work with data from logomatic UART1, but no problems with UART0. I will update the wiki to reflect this.
Any idea why sd2log doesn't work with data collected on UART1? The only diference in the data seems to be the source byte (00 or 01).


On Sun, May 6, 2012 at 4:59 AM, Cedric Marzer <address@hidden> wrote:
That was indeed the problem. One needs to connect the logomatic with its uart0 port !
I think that should be clarified on the wiki.
Thanks a lot.

Le 6 mai 2012 à 10:35, Christophe De Wagter a écrit :

> We have had that some time ago but now do not have it anymore not changing anything.
> I wonder if it could be something like swapping the uart0 and uart1 lines maybe?
> -Christophe

Paparazzi-devel mailing list

Paparazzi-devel mailing list

reply via email to

[Prev in Thread] Current Thread [Next in Thread]