[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Paparazzi-devel] PPM encoder not working.

From: Luiz Flavio Felizardo
Subject: [Paparazzi-devel] PPM encoder not working.
Date: Fri, 10 Aug 2012 12:39:15 -0300

Hello there everyone.
I'm currently having some trouble with my PPM encoder.
Well, actualy it seems to be working, When I turn on the radio the led start blinking at 3Hz like its supose to. 
But when I go to the message from the ppz center it only shows me 0,0,0,0,0,0,0,0 , I've tested it with an osciloscope and it is sending signal properly, any idea on where the problem could be?
I'm using this encoder:
With this radio/receiver:

My airframe file is:
My radio file is: (*I've tried both pulse_types)

I'm using a Lisa/M and it does have a Led that indicates if the RC signal is ok. 
In my case the led is not on wich means problem, I supose.


reply via email to

[Prev in Thread] Current Thread [Next in Thread]