[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Paparazzi-devel] Working Xbees but not when connected to Tiny.

From: Eric Parsonage
Subject: Re: [Paparazzi-devel] Working Xbees but not when connected to Tiny.
Date: Tue, 14 Aug 2012 00:52:27 +0930


still in X-CTU you can open separate sessions for each xbee and use the built 
in terminal  program to type in messages and see that they appear in the 
receive window of the other xbee you can make sure you have bi directionsl 
communication this way.

After that make sure you have the correct settings in paparazzi centre for baud 
rate and transport.


On 13/08/2012, at 11:45 PM, Sæþór Ólafur Pétursson wrote:

> Hi there.
> I'm trying to make my xbee work with the paparazzi system, my xbees work i 
> have the same PAN ID and same baudrate for bi-directional communication. And 
> in the X-CTU software they find each other and the range test works. The 
> range test shows only one of the Xbee receiving info but the rate of packages 
> received are not always 100% this normal?.
> And when i connect to paparazzi system they don't communicate at all.
> Where should I start to try to fix this problem?
> Bestu kveðjur
> Sæþór Ólafur Pétursson
> -Heilbrigðisverkfræði
> -Háskólinn í Reykjavík
> address@hidden
> _______________________________________________
> Paparazzi-devel mailing list
> address@hidden

reply via email to

[Prev in Thread] Current Thread [Next in Thread]