[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Paparazzi-devel] RC-link status indicator in gcs do not work as exp

From: gtoonstra
Subject: Re: [Paparazzi-devel] RC-link status indicator in gcs do not work as expected
Date: Mon, 17 Sep 2012 12:23:45 -0300

Another trick is to increase the throw to 125%, throttle to zero, set failsafe 
and set throw back to 100%.



On 17/09/2012, at 12:20, Gareth Roberts <address@hidden> wrote:

> Your receiver probably has failsafe built in, so it sets the controls to a 
> predetermined position when it loses signal.  You may be able to disable this 
> behaviour in your transmitter or receiver.
> Failing that, I vaguely remember some method involving setting the failsafe 
> of a spare channel you don't use to something other than what it is when the 
> TX is on, then using this 'switch' to let the autopilot know the RC link is 
> lost.
> Try searching through the mailing list archives or see if such a module 
> exists.
> Cheers,
> Gareth
> _______________________________________________
> Paparazzi-devel mailing list
> address@hidden

reply via email to

[Prev in Thread] Current Thread [Next in Thread]