[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Paparazzi-devel] airframe configuration?

From: Christophe De Wagter
Subject: Re: [Paparazzi-devel] airframe configuration?
Date: Fri, 28 Sep 2012 10:09:30 +0200

Unfortunately that guide is quite outdated. Several things still apply but not the makefile part.

There is no more need for Makfile in your airframe. You can configure the autpilot using firmware, board and subsystems blocks.

Look at:

and in ./conf/airframes/examples for something that matches your hardware


On Thu, Sep 27, 2012 at 2:06 PM, iman shirdareh <address@hidden> wrote:

I have some problem with airframe configuration, I'm following this guid:

but I can't find funjet1.XML file and there isn't any
CONFIG = \"tiny_2_1.h\"

in other example file, to change that?!

I want to use my autopilot with Cessna 182 , Is there any similar airframe file to use?

Thanks a lot..........Iman

Paparazzi-devel mailing list

reply via email to

[Prev in Thread] Current Thread [Next in Thread]