[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Paparazzi-devel] lisa m and ppm input

From: Chris Efstathiou
Subject: Re: [Paparazzi-devel] lisa m and ppm input
Date: Fri, 5 Oct 2012 11:40:24 +0300

Well that is very good to know

If you would be satisfied with a PPM input on a JTAG connector, you can
replace the following strings:

GPIO_InitStructure.GPIO_Pin = GPIO_Pin_1;

GPIO_Init(GPIOA, &GPIO_InitStructure);

by the following strings:

   GPIO_PinRemapConfig(GPIO_PartialRemap1_TIM2, ENABLE);

GPIO_InitStructure.GPIO_Pin = GPIO_Pin_3;

GPIO_Init(GPIOB, &GPIO_InitStructure);

in ppm_arch_init function in ppm_arch.c file. Then you will have the ppm
input on JTAG_TDO pin.

reply via email to

[Prev in Thread] Current Thread [Next in Thread]