[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Paparazzi-devel] Eagle Tree airspeed sensor startup testers needed

From: Tilman Baumann
Subject: Re: [Paparazzi-devel] Eagle Tree airspeed sensor startup testers needed
Date: Sun, 07 Oct 2012 14:41:06 +0100
User-agent: Mozilla/5.0 (X11; U; Linux x86_64; en-US; rv: Gecko/20120724 Icedove/3.0.11

On 05/10/12 21:31, Stephen Dwyer wrote:

I tried this out, and it was only working after a luftboot upload, not
after a regular bootup sequence. It was on a Lisa/M v2.0, nothing else
connected but UART2, on the Bixler example airframe, with the sensor
connected to I2C2. When it was working, it wasn't overly reliable,
with a considerable number of NACKed bytes in the transactions. The
same results occurred with a delay of 2sec or 8sec.

How do you see that? I only rely on the observation that the airspeed is not constant to tell if it worked.

reply via email to

[Prev in Thread] Current Thread [Next in Thread]