[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Paparazzi-devel] low cost imus with mpu6050 from drotek

From: Christophe De Wagter
Subject: Re: [Paparazzi-devel] low cost imus with mpu6050 from drotek
Date: Sun, 21 Oct 2012 12:43:52 +0200

This is what we use on our yapav3 with aspirin2.1 via I2C

If I remember the datasheet well by heart there might be 1 power settings register that differs between the 6000 and the 6050 in MPU60X0_REG_PWR_MGMT_1


On Sun, Oct 21, 2012 at 11:55 AM, Sergey Krukowski <address@hidden> wrote:
The aspirin2 uses MPU6000 sensor with SPI bus, however the MPU6050 has only I2C bus.
I've done the MPU6050 I2C driver for the Krooz autopilot, however it works only for STM32 architecture for now. I'll push it on my git soon.

Paparazzi-devel mailing list

reply via email to

[Prev in Thread] Current Thread [Next in Thread]