Hi Felix,
the processor is a cortex m4 derivative.
I think STM make the peripherals compatible with the F1, but i have to
check it.
I will try the porting of paparazzi in a few months.
I will use this pcb in future in my lectures.
Regards
Heinrich
Felix Ruess schrieb:
Hi Imed
This is a different processor than the one we have on Lisa. F3 vs F1.
But the differences are probably only in some of the peripherals.,I'm
sure it's doable.
Check the data sheets for differences in SPI and I2C...
In the master branch it might even be enough to include the F3 instead
of the F1 headers from libopencm3 where needed to get the basic stuff
running.
Cheers, Felix
On Nov 27, 2012 10:33 PM, "limaiem imed" < address@hidden> wrote:
Thank
your for the answer.
My question was more related to the possibility to do it !
It is good to hear the word "Reliability" :)
some months ago I tried to collect informations about AP boards
reliability ! because I had bad experience with some PTH08080WAH ship. It would be nice it there is a
statistical study to analyse the path of failure of the AP !
Imed LIMAIEM
address@hidden
On Tue, Nov 27, 2012 at 10:16 PM, Eduardo
lavratti <address@hidden> wrote:
Reliability.
Some time ago i do exactly what you say !
The problem is .. "its adaptation" ...
lisa_m is not so much expensive.
I live in Brasil, so here, the price is 4x the real one and i have 2
lisa board and some twog.
Way? because i not want to use an adapted hardware on my planes and
rotorcrafts.
for adaptation you can use and MULTI-WII ! its cheap !
Date: Tue, 27 Nov 2012 22:08:16 +0100
From: address@hidden
To: address@hidden
Subject: Re: [Paparazzi-devel] New Autopilot hardware for 16 Euros
I have little know how in Electronics and some good skills in
programming.
What I can't figure out is that since we have the same micro-controller
as the one used for LISA board and the same free connectors and
assuming that we can add resistor, capacitor where in some places ...
why can't we load the code in the micro-controller ?
am I missing something ?
Imed LIMAIEM
address@hidden
_______________________________________________
Paparazzi-devel mailing list
address@hidden
https://lists.nongnu.org/mailman/listinfo/paparazzi-devel
_______________________________________________
Paparazzi-devel mailing list
address@hidden
https://lists.nongnu.org/mailman/listinfo/paparazzi-devel
_______________________________________________
Paparazzi-devel mailing list
address@hidden
https://lists.nongnu.org/mailman/listinfo/paparazzi-devel
_______________________________________________
Paparazzi-devel mailing list
address@hidden
https://lists.nongnu.org/mailman/listinfo/paparazzi-devel
|