paparazzi-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Paparazzi-devel] connect liza/m with aspirin


From: Stephen Dwyer
Subject: Re: [Paparazzi-devel] connect liza/m with aspirin
Date: Tue, 2 Apr 2013 10:18:48 -0600

Hi Evan,

Sorry, no pictures of the off-board option. I don't know of anyone who has done this (anyone??). The onboard option is just as illustrated on the wiki.

Thanks,
-Stephen Dwyer


On Tue, Apr 2, 2013 at 1:50 AM, evan igor <address@hidden> wrote:
thanks Stephen for your answer 
but do you have a picture for both cases.

Regards
Evan


On Tue, Apr 2, 2013 at 1:46 AM, Stephen Dwyer <address@hidden> wrote:
Hello,

You could purchase them separately, but then you would have to solder it on afterwards. You may be able to solder it to a carrier board, but then you will have to modify source code and build some picoblade connector adapters (and possibly create a ratsnest of wiring to get all the necessary connections). It could be done though.

Thanks,
-Stephen Dwyer


On Mon, Apr 1, 2013 at 3:02 PM, evan igor <address@hidden> wrote:
Hi all;
sorry i want an advice for which combination i should buy i want to buy aspirin as separate and they have another option for sell liza/m with aspirin soldered.
so can i buy aspirin individually and just connect with liza without soldering.

thanks everybody

_______________________________________________
Paparazzi-devel mailing list
address@hidden
https://lists.nongnu.org/mailman/listinfo/paparazzi-devel



_______________________________________________
Paparazzi-devel mailing list
address@hidden
https://lists.nongnu.org/mailman/listinfo/paparazzi-devel



_______________________________________________
Paparazzi-devel mailing list
address@hidden
https://lists.nongnu.org/mailman/listinfo/paparazzi-devel



reply via email to

[Prev in Thread] Current Thread [Next in Thread]