[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Paparazzi-devel] Beginner

From: Marius Pfeffer
Subject: Re: [Paparazzi-devel] Beginner
Date: Tue, 27 Aug 2013 13:26:05 +0200


Take a look at the mailing list archive.
Some threads (parts of this for example; could help you.


Am 27.08.2013 12:55 schrieb "Ben Scammell" <address@hidden>:
Thank you.  Very helpful.

From: Chris <address@hidden>
Reply-To: <address@hidden>
Date: Tue, 27 Aug 2013 13:45:04 +0300
To: <address@hidden>
Subject: Re: [Paparazzi-devel] Beginner

I am not a rotorcraft expert as i just finished my first ever (hexacopter)
but i would start with a hobbyking f550 or similar quadcopter  and not a hexacopter or more.
Optimize your motor and esc selection for 3-4S with 10x4.8 propellers
One advice, buy rotorcraft specific ESCs and good motors (ask the more experienced flyers here),
don't be cheap on the motors otherwise you will end up paying much more real soon
due to bearing failure and exaggerated power handling specs.
Wait for more opinions from those who know better than me...

On 08/27/2013 01:04 PM, Ben Scammell wrote:
I am a beginner inspired by the Lisa/S article on that wants to build a quad-copter UAV based on it…

I have (obviously) found the site.

Does anyone have any good advice on what airframe(s) I should look at?

Thanks, Ben

Paparazzi-devel mailing list

_______________________________________________ Paparazzi-devel mailing list address@hidden

Paparazzi-devel mailing list

reply via email to

[Prev in Thread] Current Thread [Next in Thread]