[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Paparazzi-devel] New GPS recommendation

From: Chris Gough
Subject: Re: [Paparazzi-devel] New GPS recommendation
Date: Tue, 3 Sep 2013 22:36:25 +1000

Chris Gough

On 03/09/2013, at 10:22 PM, address@hidden wrote:

> I have one of the new gps's from 3dr. Works extremely well and includes magno 
> to get it further away from influences. Using that on the ardu though so need 
> to check if it works for paparazzi.

The new 3DR gps is a LEA-6H and so will be fine, no problem. The connectors are 
hirose type (not  picoblades like an original paparazzi gps)  so you will have 
to splice together a cable, that's all.

The HMC5883L mag on the 3DR gps is a separate i2c connector, so it's no 
different really to having one on a separate breakout board.

Chris Gough

> I had the gs407 before but that pin was a dealbreaker. There was abreakout 
> rhat would just fall off. It was years ago so should check if the issue 
> persists.
> Rgds,
> Gerard
> On 03/09/2013, at 09:15, Tobias <address@hidden> wrote:
>> I just changed mine to this one - really like the helical antenna and the 
>> performance is rock solid ;-)
>> unfortunately you can not store the configuration permanently anymore with 
>> the new version - but with a small battery its fine -
>> cheers Tobi
>> _______________________________________________
>> Paparazzi-devel mailing list
>> address@hidden
> _______________________________________________
> Paparazzi-devel mailing list
> address@hidden

reply via email to

[Prev in Thread] Current Thread [Next in Thread]