[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Paparazzi-devel] handle high speed jet

From: Chris
Subject: Re: [Paparazzi-devel] handle high speed jet
Date: Mon, 23 Sep 2013 20:14:06 +0300
User-agent: Mozilla/5.0 (X11; Linux i686; rv:24.0) Gecko/20100101 Thunderbird/24.0

What do you mean what servos, haven't you already flew the jet manually?
Have you flown a jet before?
The KroozSD already has an IMU, the AHRS method is selected in the airframe file (float_dcm is good i think) You don't need to fly the jet at full speed during initial flight testing, test it first at 120-160Km/h
and then increase it.
In any case if you are a beginner built a slow electric airplane first (turbines don't have much vibrations thus are similar in this aspect with electric airplanes), jets are very dangerous for testing as i found out my self.

>>i want to handle my jet model by kroozSD . my jet goes over 350 km/h
>>what kind of servos,airspeed sensors and AHRS sensors is compatible for my model.
>>if it possible please give me some example.

reply via email to

[Prev in Thread] Current Thread [Next in Thread]