[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Paparazzi-devel] Question about the xbee_api mode of telemetry subsyste

From: Weiying YI
Subject: [Paparazzi-devel] Question about the xbee_api mode of telemetry subsystem
Date: Tue, 12 Nov 2013 23:49:39 +0800

Hi, guys:

Currently, I have two quad-copters using Lisa/M 2.0 board and I want to control them using one single ground station. And I am using the 'Xbee Pro S2B' module for communication.

The question is:
How to configure the Xbee modules using X-CTU so that I can use one ground station to control these quad-copters.

Are the Xbee module on ground using 'COORDINATOR API' mode?

Are the Xbee modules in air using 'ROUTER/END DEVICE API' mode?

It will be helpful if you can provide an example configuration procedure.


reply via email to

[Prev in Thread] Current Thread [Next in Thread]