[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Paparazzi-devel] GCS cannot parse XBEE API mode information.

From: ??d1.
Subject: [Paparazzi-devel] GCS cannot parse XBEE API mode information.
Date: Sun, 17 Nov 2013 12:14:53 +0800

Dear All:
  Now we're trying to control multiple aircrafts via one ground control station.
  Our telemetry module is Xbee Pro S2B, so we looked into sw/airborne/subsystem/datalink/xbee.h
  We found that the Ground Station Address is hardcoded as 0x100, is there any special reason for these?
  Is 0x100 a Serial Number for the Xbee module or what?.

  Anyway, one of us add an Xbee_PRO_S2B.h to simulate the working of xbee868.h, and define the 
  GROUND_STAT_ADDR as the serial number of the module which is connected to the ground station.
  However, the Ground station cannot parse the message sent from the aircraft, and report error message:
  unknown frame id 144.

  Can anyone tell us what is the possible cause of this problem ? And how to (maybe) try to modify the ground station message parsing functionality?(Say, which file shall we look into ?)

address@hidden department, Faculty of Engineering, CUHK

reply via email to

[Prev in Thread] Current Thread [Next in Thread]