[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Paparazzi-devel] Powering Lisa/M 2.0

From: Chris
Subject: Re: [Paparazzi-devel] Powering Lisa/M 2.0
Date: Sat, 03 May 2014 22:39:41 +0300
User-agent: Mozilla/5.0 (X11; Linux i686; rv:24.0) Gecko/20100101 Thunderbird/24.5.0

No problem at all if you don't parallel the output of 2 or more BECs.
Sometimes linear BECs (switchmode never) can be paralleled but this is not a good practice in any case.
In other words if you use more than one BEC in a split load configuration but make sure that their + rail is not paralleled.

On 05/03/2014 01:59 PM, Dylan Brunello wrote:

I have a Lisa/M 2.0 configured with the default power jumpers. I'd like to power everything in the system from a single battery (3S LiPo). The plan is to power the servo rail using the 5V BEC on the ESC. Is it safe to connect an additional 5V BEC to the battery and use that to power the Lisa and peripherals? My concern is the two BECs on the one battery. Any thoughts regarding powering the system in this fashion?


Paparazzi-devel mailing list

reply via email to

[Prev in Thread] Current Thread [Next in Thread]