Re: [Paparazzi-devel] Paparazzi JSBSim configuration

[Felix Ruess]

Hi Shaun,

should be fixed in master, at least it basically works.

Also note that you should be able to use NPS (with JSBSim) for fixedwing simulation now and that we will remove the jsbsim target in the future.

See microjet_lisa_m.xml as a basic example (which roughly works using basic.xml flightplan, considering that the Malolo model is actually quite a bit bigger, faster).

If you add the nps.xml settings file you can also change the wind, turbulence, etc...

Cheers, Felix

On Thu, May 15, 2014 at 8:55 PM, Shaun C <address@hidden> wrote:

Hello,

As part of a college project we have been doing some work with paparazzi and hitl based simulations. We wish to use jsbsim for the simulator.

I am using the latest version of paparazzi with the latest version of paparazzi-jsbsim running on ubuntu 12.04 and also 14.04 (multiple dev machines).

Right now I am trying to get the standard micro jet configuration profile to run in sitl with the jsbsim simulation and I am having some difficulties with what appear to be the paparazzi flight configuration parameters. After this is working I can move into the hitl portion of our project.

This is a list of what I have tried so far to get a working flight. To keep this email short I will omit the details:

The first issue is that the flight crashes very soon after take-off. I added a catapult configuration and changed launch speeds etc.. It all resulted in the plane crashing again at various locations (within meters of the launch point).

Recreating the configuration file based on jsbsim.xml 

Using a different plane model other than the Malolo1 

Adding jsbsim target to several of the other configurations like twinjet etc...

Changing many different configuration parameters in the micro jet XML file

Tuning the pid for the pitch (interestingly enough, the best results that I got for jsbsim would not work for the OCaml simulator and vice versa)

I also took a configuration file for the micro jet from the paparazzi git version from July 2011. Some of the pid parameters in that micro jet file are inverted compared to the parameters in the latest version. The older version works slightly better in that it does not crash but it also never seems to take-off either, just travel along the ground.

All of the above were tried and I have not been able to get the plane to fly.

The reason for this may be due to my n00bness with paparazzi and the jsbsim FDM. I am willing to bet that there are things I am not doing correctly but I cannot seem to gain any traction. All of the trial and error now leads me to a question regarding the jsbsim implementation.

Does the current version of paparazzi actually work with the current version of paparazzi jsbsim (July 2012  version)? 

If it does, is there a known working configuration that is available that I can use as a reference?

Otherwise is there some resource I can draw from to get a jsbsim based simulation up and running?

Thanks in advance.

Shaun.

_______________________________________________
Paparazzi-devel mailing list
address@hidden
https://lists.nongnu.org/mailman/listinfo/paparazzi-devel