[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Paparazzi-devel] The master firmware of paparazzi is unstable

From: Gautier Hattenberger
Subject: Re: [Paparazzi-devel] The master firmware of paparazzi is unstable
Date: Thu, 22 May 2014 22:14:20 +0200
User-agent: Mozilla/5.0 (X11; Linux i686; rv:24.0) Gecko/20100101 Thunderbird/24.4.0


"mayday, kill mode" is displayed each time the motors are "killed", which means that the autopilot can't use it. At startup, the motors are killed to prevent unwanted start. So you don't need to worry about this first message.


Le 22/05/2014 19:04, 心如烛光 a écrit :
    Thanks for your concern.My autopilot is LISA/M2.The subsystems include UBX5H(GPS),Xbee900pro(datalink),Futaba R2008SB(RC receiver).The firmware version is master V5.0.And I fly my plane with configuration of the micro jet's XML file which is included in the paparazzi center.
    The battery voltage is 11.5V while it returns "mayday,kill mode"at the initializing time,which is far above the catastrophic voltage.And I found that it happens every time at the beginning.Why?How should I do to avoid?And if it relates to the throttle failure which has made my aircraft crash?

Paparazzi-devel mailing list

reply via email to

[Prev in Thread] Current Thread [Next in Thread]