[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Paparazzi-devel] STM32F407VET6 compatibility

From: gsenroc
Subject: Re: [Paparazzi-devel] STM32F407VET6 compatibility
Date: Tue, 03 Jun 2014 16:16:14 +0200
User-agent: Mozilla/5.0 (X11; Linux x86_64; rv:24.0) Gecko/20100101 Thunderbird/24.5.0

Thanks Felix, I´ll look into it, hopefully I´ll have it flying soon.


On 02-06-14 19:16, Felix Ruess wrote:
Hi Xin,

should not be hard to make board files for it, use the discovery one as a base if the pins are the same.
Then you need to create a linker script with the correct flash size and set it in the board makefile (instead of the apogee.ld script that is currently used)

Cheers, Felix

On Mon, Jun 2, 2014 at 6:33 PM, gsenroc <address@hidden> wrote:

I have an  STM32F407VET6 dev board
<>   and I would like to use it
as a Paparazzi flight controller.

Looking at the datasheet it seems it's nearly the same as STM32F4Discovery
with an STM32F407VGT6, only flash size is different and no ST-Link on board.

I'm not very sure about the pins but it seems to be the same. It looks like
that I can use it the same way as Discovery without modifying any codes?


View this message in context:
Sent from the paparazzi-devel mailing list archive at

Paparazzi-devel mailing list

Paparazzi-devel mailing list

reply via email to

[Prev in Thread] Current Thread [Next in Thread]