[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Paparazzi-devel] Superbit USBRF Radio Dongle issue: Failure opening

From: karlito
Subject: Re: [Paparazzi-devel] Superbit USBRF Radio Dongle issue: Failure opening serial device: fd < 0 (/dev/ttyUSB0)
Date: Mon, 23 Jun 2014 16:42:03 +0200
User-agent: Mozilla/5.0 (X11; Linux x86_64; rv:24.0) Gecko/20100101 Thunderbird/24.5.0

If I remember well when I connect the back magic prob I get ttyACM0 and ttyACM1. Then when I plug the superbit RF I get the ttyACM2, and not a TTYUSB*.

Sent from my crane.
On 23-06-14 14:23, Prabir Guha wrote:
Hello All:

I am very new to paparazzi auto pilot (Lisa/S). I am running paparazzi GCS on Ubuntu 12.10. When I plug-in the Superbit USBRF radio dongle to the usb port, the device is recognized by the kernel, but I do not see a /dev/ttyUSB0. So when I try to execute session for Flight address@hidden, I get the " Failure opening serial device: fd < 0 (/dev/ttyUSB0) " error. I am sure I am missing a device driver somewhere! The blackmagic JTAG probe works fine though and I do see the /dev/ttyACM0 device the blackmagic probe is connected to the usb port.

Can one of you gurus let me know what I need to do to get the /dev/ttyUSB0 device show up when the Superbit USBRF Radio dongle to the usb port ?

Thank you so much for your help in advance.



Paparazzi-devel mailing list

reply via email to

[Prev in Thread] Current Thread [Next in Thread]