|Subject:||Re: [Paparazzi-devel] FROZEN Compass Output on RAW Sensors|
|Date:||Wed, 23 Jul 2014 11:04:45 +0300|
Did you read this thread: http://lists.paparazziuav.org/paparazzi-Lisa-M-v2-magnetometer-not-working-td15761.html
There might be a timing issue when starting the HMC5885. Which board are you using ?
Le 22/07/2014 09:39, Metalman Baris a écrit :
Issue: Aspirin v2.2 HMC data freezes after power-on
Description: After powering the IMU board, sometimes HMC58xx compass output freezes. I have checked it by using IMU_MAG_RAW on telemetry/raw sensors display.
When the issue occurs I have also checked the other sensors on the board, it seems IMU_ACCEL_RAW and IMU_GYRO_RAW are updated correctly.
The error counter of telemetry for IMU_MAG_RAW is not increasing so I`ve monitored the I2C line via Logic analyzer and I saw that HMC sends same data output via I2C everytime.
After checking the HMC datasheet, I am suspicious about lock state of SR1 bit of HMC status register. Datasheet states that "When this bit is set, the six data output registers are locked and any new data will not be placed".
I am still digging and try to solve this problem but I wonder that is the issue board specific or has someone face an issue like that?
_______________________________________________ Paparazzi-devel mailing list address@hidden https://lists.nongnu.org/mailman/listinfo/paparazzi-devel
Paparazzi-devel mailing list
|[Prev in Thread]||Current Thread||[Next in Thread]|