[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Paparazzi-devel] Mode switch selection?
From: |
Sergey Krukowski |
Subject: |
Re: [Paparazzi-devel] Mode switch selection? |
Date: |
Sat, 13 Dec 2014 17:46:40 +0100 |
User-agent: |
Opera Mail/11.61 (Win32) |
The AUTO1 modes are different:
AP_MODE_ATTITUDE_Z_HOLD (A_ZH)
You control the attitude (roll, pitch and yaw angles) and it holds the
altitude you were at when entering this mode.
Your throttle stick position still limits the max throttle authority
unless disabled with NO_RC_THRUST_LIMIT.
AP_MODE_HOVER_Z_HOLD (H_ZH)
The rotorcraft hovers at the 3D position you were at when entering this
mode (position and altitude control). RC commands work the same as in
HOVER mode.
Your throttle stick position still limits the max throttle authority
unless disabled with NO_RC_THRUST_LIMIT.
The whole list of modes here:
http://wiki.paparazziuav.org/wiki/Rotorcraft_Configuration#Autopilot_modes
The webpages say to use:
<section name="MODE" prefix="MODE_">
<define name="MANUAL" value="AP_MODE_ATTITUDE_DIRECT" />
<define name="AUTO1" value="AP_MODE_ATTITUDE_Z_HOLD" />
<define name="AUTO2" value="AP_MODE_NAV" />
</section>
Example XML files have:
<section name="AUTOPILOT">
<define name="MODE_MANUAL" value="AP_MODE_ATTITUDE_DIRECT"/>
<define name="MODE_AUTO1" value="AP_MODE_HOVER_Z_HOLD"/>
<define name="MODE_AUTO2" value="AP_MODE_NAV"/>
</section>
Are these actually effectively the same thing?
_______________________________________________
Paparazzi-devel mailing list
address@hidden
https://lists.nongnu.org/mailman/listinfo/paparazzi-devel