[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Paparazzi-devel] Installing Paparazzi on the Pcduino3.

From: Felix Ruess
Subject: Re: [Paparazzi-devel] Installing Paparazzi on the Pcduino3.
Date: Mon, 6 Apr 2015 07:46:53 +0200

So that is the problem then. The linaro image you are using uses an older 3.4 kernel while the official Ubuntu arm image uses a more recent one (3.13 I think).

Hence the packages in the PPA are built with support for SO_REUSEPORT but your kernel does not support it.

So you have to build ivy from source or use a more recent kernel (>= 3.9)

Cheers, Felix

Linux kernel version "Linux linaro-alip 3.4.79+"


paparazzi installation with by the following steps.

$ sudo add-apt-repository ppa:paparazzi-uav/ppa
$ sudo apt-get update
$ sudo apt-get install paparazzi-dev gcc-arm-none-eabi

git clone
git checkout master
make ground_segment.opt

View this message in context:
Sent from the paparazzi-devel mailing list archive at

Paparazzi-devel mailing list

reply via email to

[Prev in Thread] Current Thread [Next in Thread]