[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Paparazzi-devel] MPU9250 Driver in SPI mode

From: Moses
Subject: Re: [Paparazzi-devel] MPU9250 Driver in SPI mode
Date: Sun, 24 May 2015 16:39:07 -0700 (MST)

AK8963 has been accessed as slave device through I2C in the SPI driver.
1 pressure sensor(MS5611 IIC) + 1 OSD(MAX7456 SPI) + 1 9DOF(MPU9250 SPI) in
my autopilot.


btw: SLAVE4 is means the NCS(or NSS)pin of mpu9250 that nothing with IIC
address. MPU9250 should send back a lot of data in DMA mode, add any other
extended device in the same SPI bus is not a good idea.  

View this message in context:
Sent from the paparazzi-devel mailing list archive at

reply via email to

[Prev in Thread] Current Thread [Next in Thread]