[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Paparazzi-devel] barometer ms5611

From: Cédric Marzer
Subject: Re: [Paparazzi-devel] barometer ms5611
Date: Mon, 23 Nov 2015 13:10:25 +0100

Thank you for your help Felix,
Here is what I get in the ap_srcs.list.

CFLAGS:  -Ifirmwares/rotorcraft -Iboards/imp -DBOARD_CONFIG="boards/imp_v5.h" 
-DRADIO_CONTROL_TYPE_H="subsystems/radio_control/ppm.h" -DRADIO_CONTROL 
-DGPS_TYPE_H="subsystems/gps/gps_ubx.h" -DUSE_UART2 -DUART2_BAUD=B38400 
-DINS_TYPE_H="subsystems/ins/ins_int.h" -DUSE_VFF_EXTENDED -DSERVO_HZ=400 

In my opinion it looks all right…but it doesn't work...
I am using version 5.6 (and I am very clumsy with svn and I made some changes 
to the code, so if I could avoid upgrading, I'd be happy).
Is it normal that the baro_ms5611_spi module doesn't show up in the GCS ? I 
have both gps modules with a tick box but not the max7456 nor the 

Le 23 nov. 2015 à 00:06, Felix Ruess <address@hidden> a écrit :

> Hi Cedric,
> the baro_ms5611_spi module works fine on my Lisa/MX board here with latest 
> master (v5.7_devel-657-g0eb55b6)
> What paparazzi_version are you using?
> Are you sure you have the correct SPI slave select GPIO?
> If yes, can you plz check if the correct flags (USE_SPI_SLAVE0, etc) are set 
> (var/aircrafts/myaircraft/ap_srcs.list)
> Felix

reply via email to

[Prev in Thread] Current Thread [Next in Thread]