[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Paparazzi-devel] barometer ms5611

From: Felix Ruess
Subject: Re: [Paparazzi-devel] barometer ms5611
Date: Mon, 23 Nov 2015 14:41:32 +0100

That indeed looks ok...
Do the other SPI sensors/devices work? Did you check the SS line with a scope?

Only the modules with start/stop functions and autorun != LOCK show up in settings/GCS.

On Mon, Nov 23, 2015 at 1:10 PM, Cédric Marzer <address@hidden> wrote:
Thank you for your help Felix,
Here is what I get in the ap_srcs.list.


In my opinion it looks all right…but it doesn't work...
I am using version 5.6 (and I am very clumsy with svn and I made some changes to the code, so if I could avoid upgrading, I'd be happy).
Is it normal that the baro_ms5611_spi module doesn't show up in the GCS ? I have both gps modules with a tick box but not the max7456 nor the bark_ms5611_spi…

Le 23 nov. 2015 à 00:06, Felix Ruess <address@hidden> a écrit :

> Hi Cedric,
> the baro_ms5611_spi module works fine on my Lisa/MX board here with latest master (v5.7_devel-657-g0eb55b6)
> What paparazzi_version are you using?
> Are you sure you have the correct SPI slave select GPIO?
> If yes, can you plz check if the correct flags (USE_SPI_SLAVE0, etc) are set (var/aircrafts/myaircraft/ap_srcs.list)
> Felix

Paparazzi-devel mailing list

reply via email to

[Prev in Thread] Current Thread [Next in Thread]