Re: [Paparazzi-devel] Tiltrotor-Project

[notoriou5]

Here are my current PID- and reference-values:

%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%

    <define name="REF_OMEGA_P"  value="800" unit="deg/s"/>
    <define name="REF_ZETA_P"   value="0.85"/>
    <define name="REF_MAX_P"    value="400." unit="deg/s"/>
    <define name="REF_MAX_PDOT" value="RadOfDeg(8000.)"/>
 
    <define name="REF_OMEGA_Q"  value="800" unit="deg/s"/>
    <define name="REF_ZETA_Q"   value="0.85"/>
    <define name="REF_MAX_Q"    value="400." unit="deg/s"/>
    <define name="REF_MAX_QDOT" value="RadOfDeg(8000.)"/>
 
    <define name="REF_OMEGA_R"  value="500" unit="deg/s"/>
    <define name="REF_ZETA_R"   value="0.85"/>
    <define name="REF_MAX_R"    value="180." unit="deg/s"/>
    <define name="REF_MAX_RDOT" value="RadOfDeg(1800.)"/>
 

    
    <define name="PHI_PGAIN"  value="3800"/>
    <define name="PHI_DGAIN"  value="400"/>
    <define name="PHI_IGAIN"  value="250"/>
 
    <define name="THETA_PGAIN"  value="3800"/>
    <define name="THETA_DGAIN"  value="450"/>
    <define name="THETA_IGAIN"  value="250"/>
 
    <define name="PSI_PGAIN"  value="500"/>
    <define name="PSI_DGAIN"  value="300"/>
    <define name="PSI_IGAIN"  value="20"/>
 
    
    <define name="PHI_DDGAIN"   value="300"/>
    <define name="THETA_DDGAIN" value="300"/>
    <define name="PSI_DDGAIN"   value="300"/>
  </section>
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%

And here is the output of the attitude in the real-time plotter:

<http://lists.paparazziuav.org/file/n18096/ATTITUDE-Graphs__23.png> 

I tried to adjust the PID values but it is really hard to do. I know how PID
works, but it does not really seem to do what I want. I can not get rid of
those spikes in my graphs. Maybe I asdjust the lowpassfilter in the
reference values?

Thanks a lot, Kevin



--
View this message in context: 
http://lists.paparazziuav.org/Tiltrotor-Project-tp17906p18096.html
Sent from the paparazzi-devel mailing list archive at Nabble.com.