[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Paparazzi-devel] Elle0 "test_" targets?

From: Felix Ruess
Subject: Re: [Paparazzi-devel] Elle0 "test_" targets?
Date: Sun, 18 Sep 2016 14:20:49 +0200

Hi Simon,

not sure if you noticed
With that usb telemetry should work on Elle0

Cheers, Felix

On Sun, Aug 14, 2016 at 2:04 PM, Simon Liebold <address@hidden> wrote:
Hi Felix,

Am 13.08.2016 um 21:13 schrieb Felix Ruess:
test_sys_time_timer will blink set up timers to blink LEDs, ...
OK, this works for me.

usb_tunnel makes a tunnel between one uart and usb (which can e.g. also be used to configure a GPS through USB).
No joy here. It doesn't detect anything if I power up the Elle0 before plugging in the USB.

But still, the successful test_sys_time_timer suggests that the Elle0 is not yet ready for the electronics bin. This is a good thing.

Thanks for the support Felix. I will try a few other things.


Paparazzi-devel mailing list

reply via email to

[Prev in Thread] Current Thread [Next in Thread]