[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Phpgroupware-cvs] old/squirrelmail/src/phpmailer-1.41 class.smtp.php, 1
|
From: |
skwashd |
|
Subject: |
[Phpgroupware-cvs] old/squirrelmail/src/phpmailer-1.41 class.smtp.php, 1.1 LICENSE, 1.1 ChangeLog.txt, 1.1 README, 1.1 class.phpmailer.php, 1.1 |
|
Date: |
Thu, 5 May 2005 02:56:00 +0200 |
Update of old/squirrelmail/src/phpmailer-1.41
Added Files:
Branch: MAIN
class.smtp.php
LICENSE
ChangeLog.txt
README
class.phpmailer.php
Log Message:
cvs clean up
====================================================
Index: class.smtp.php
<?php
/*
* File: smtp.php
*
* Description: Define an SMTP class that can be used to connect
* and communicate with any SMTP server. It implements
* all the SMTP functions defined in RFC821 except TURN.
*
* Creator: Chris Ryan <address@hidden>
* Created: 03/26/2001
*
* TODO:
* - Move all the duplicate code to a utility function
* Most of the functions have the first lines of
* code do the same processing. If this can be moved
* into a utility function then it would reduce the
* overall size of the code significantly.
*/
/*
* STMP is rfc 821 compliant and implements all the rfc 821 SMTP
* commands except TURN which will always return a not implemented
* error. SMTP also provides some utility methods for sending mail
* to an SMTP server.
*/
class SMTP {
var $SMTP_PORT = 25; # the default SMTP PORT
var $CRLF = "\r\n"; # CRLF pair
var $smtp_conn; # the socket to the server
var $error; # error if any on the last call
var $helo_rply; # the reply the server sent to us for HELO
var $do_debug; # the level of debug to perform
/*
* SMTP()
*
* Initialize the class so that the data is in a known state.
*/
function SMTP() {
$this->smtp_conn = 0;
$this->error = null;
$this->helo_rply = null;
$this->do_debug = 0;
}
/************************************************************
* CONNECTION FUNCTIONS *
***********************************************************/
/*
* Connect($host, $port=0, $tval=30)
*
* Connect to the server specified on the port specified.
* If the port is not specified use the default SMTP_PORT.
* If tval is specified then a connection will try and be
* established with the server for that number of seconds.
* If tval is not specified the default is 30 seconds to
* try on the connection.
*
* SMTP CODE SUCCESS: 220
* SMTP CODE FAILURE: 421
*/
function Connect($host,$port=0,$tval=30) {
# set the error val to null so there is no confusion
$this->error = null;
# make sure we are __not__ connected
if($this->connected()) {
# ok we are connected! what should we do?
# for now we will just give an error saying we
# are already connected
$this->error =
array("error" => "Already connected to a server");
return false;
}
if(empty($port)) {
$port = $this->SMTP_PORT;
}
#connect to the smtp server
$this->smtp_conn = fsockopen($host, # the host of the server
$port, # the port to use
$errno, # error number if any
$errstr, # error message if any
$tval); # give up after ? secs
# verify we connected properly
if(empty($this->smtp_conn)) {
$this->error = array("error" => "Failed to connect to server",
"errno" => $errno,
"errstr" => $errstr);
if($this->do_debug >= 1) {
echo "SMTP -> ERROR: " . $this->error["error"] .
": $errstr ($errno)" . $this->CRLF;
}
return false;
}
# sometimes the SMTP server takes a little longer to respond
# so we will give it a longer timeout for the first read
// Commented b/c of win32 warning messages
//if(function_exists("socket_set_timeout"))
// socket_set_timeout($this->smtp_conn, 1, 0);
# get any announcement stuff
$announce = $this->get_lines();
# set the timeout of any socket functions at 1/10 of a second
//if(function_exists("socket_set_timeout"))
// socket_set_timeout($this->smtp_conn, 0, 100000);
if($this->do_debug >= 2) {
echo "SMTP -> FROM SERVER:" . $this->CRLF . $announce;
}
return true;
}
/*
* Authenticate()
*
* Performs SMTP authentication. Must be run after running the
* Hello() method. Returns true if successfully authenticated.
*/
function Authenticate($username, $password) {
// Start authentication
fputs($this->smtp_conn,"AUTH LOGIN" . $this->CRLF);
$rply = $this->get_lines();
$code = substr($rply,0,3);
if($code != 334) {
$this->error =
array("error" => "AUTH not accepted from server",
"smtp_code" => $code,
"smtp_msg" => substr($rply,4));
if($this->do_debug >= 1) {
echo "SMTP -> ERROR: " . $this->error["error"] .
": " . $rply . $this->CRLF;
}
return false;
}
// Send encoded username
fputs($this->smtp_conn, base64_encode($username) . $this->CRLF);
$rply = $this->get_lines();
$code = substr($rply,0,3);
if($code != 334) {
$this->error =
array("error" => "Username not accepted from server",
"smtp_code" => $code,
"smtp_msg" => substr($rply,4));
if($this->do_debug >= 1) {
echo "SMTP -> ERROR: " . $this->error["error"] .
": " . $rply . $this->CRLF;
}
return false;
}
// Send encoded password
fputs($this->smtp_conn, base64_encode($password) . $this->CRLF);
$rply = $this->get_lines();
$code = substr($rply,0,3);
if($code != 235) {
$this->error =
array("error" => "Password not accepted from server",
"smtp_code" => $code,
"smtp_msg" => substr($rply,4));
if($this->do_debug >= 1) {
echo "SMTP -> ERROR: " . $this->error["error"] .
": " . $rply . $this->CRLF;
}
return false;
}
return true;
}
/*
* Connected()
*
* Returns true if connected to a server otherwise false
*/
function Connected() {
if(!empty($this->smtp_conn)) {
$sock_status = socket_get_status($this->smtp_conn);
if($sock_status["eof"]) {
# hmm this is an odd situation... the socket is
# valid but we aren't connected anymore
if($this->do_debug >= 1) {
echo "SMTP -> NOTICE:" . $this->CRLF .
"EOF caught while checking if connected";
}
$this->Close();
return false;
}
return true; # everything looks good
}
return false;
}
/*
* Close()
*
* Closes the socket and cleans up the state of the class.
* It is not considered good to use this function without
* first trying to use QUIT.
*/
function Close() {
$this->error = null; # so there is no confusion
$this->helo_rply = null;
if(!empty($this->smtp_conn)) {
# close the connection and cleanup
fclose($this->smtp_conn);
$this->smtp_conn = 0;
}
}
/**************************************************************
* SMTP COMMANDS *
*************************************************************/
/*
* Data($msg_data)
*
* Issues a data command and sends the msg_data to the server
* finializing the mail transaction. $msg_data is the message
* that is to be send with the headers. Each header needs to be
* on a single line followed by a <CRLF> with the message headers
* and the message body being seperated by and additional <CRLF>.
*
* Implements rfc 821: DATA <CRLF>
*
* SMTP CODE INTERMEDIATE: 354
* [data]
* <CRLF>.<CRLF>
* SMTP CODE SUCCESS: 250
* SMTP CODE FAILURE: 552,554,451,452
* SMTP CODE FAILURE: 451,554
* SMTP CODE ERROR : 500,501,503,421
*/
function Data($msg_data) {
$this->error = null; # so no confusion is caused
if(!$this->connected()) {
$this->error = array(
"error" => "Called Data() without being connected");
return false;
}
fputs($this->smtp_conn,"DATA" . $this->CRLF);
$rply = $this->get_lines();
$code = substr($rply,0,3);
if($this->do_debug >= 2) {
echo "SMTP -> FROM SERVER:" . $this->CRLF . $rply;
}
if($code != 354) {
$this->error =
array("error" => "DATA command not accepted from server",
"smtp_code" => $code,
"smtp_msg" => substr($rply,4));
if($this->do_debug >= 1) {
echo "SMTP -> ERROR: " . $this->error["error"] .
": " . $rply . $this->CRLF;
}
return false;
}
# the server is ready to accept data!
# according to rfc 821 we should not send more than 1000
# including the CRLF
# characters on a single line so we will break the data up
# into lines by \r and/or \n then if needed we will break
# each of those into smaller lines to fit within the limit.
# in addition we will be looking for lines that start with
# a period '.' and append and additional period '.' to that
# line. NOTE: this does not count towards are limit.
# normalize the line breaks so we know the explode works
$msg_data = str_replace("\r\n","\n",$msg_data);
$msg_data = str_replace("\r","\n",$msg_data);
$lines = explode("\n",$msg_data);
# we need to find a good way to determine is headers are
# in the msg_data or if it is a straight msg body
# currently I'm assuming rfc 822 definitions of msg headers
# and if the first field of the first line (':' sperated)
# does not contain a space then it _should_ be a header
# and we can process all lines before a blank "" line as
# headers.
$field = substr($lines[0],0,strpos($lines[0],":"));
$in_headers = false;
if(!empty($field) && !strstr($field," ")) {
$in_headers = true;
}
$max_line_length = 998; # used below; set here for ease in change
while(list(,$line) = @each($lines)) {
$lines_out = null;
if($line == "" && $in_headers) {
$in_headers = false;
}
# ok we need to break this line up into several
# smaller lines
while(strlen($line) > $max_line_length) {
$pos = strrpos(substr($line,0,$max_line_length)," ");
$lines_out[] = substr($line,0,$pos);
$line = substr($line,$pos + 1);
# if we are processing headers we need to
# add a LWSP-char to the front of the new line
# rfc 822 on long msg headers
if($in_headers) {
$line = "\t" . $line;
}
}
$lines_out[] = $line;
# now send the lines to the server
while(list(,$line_out) = @each($lines_out)) {
if($line_out[0] == ".") {
$line_out = "." . $line_out;
}
fputs($this->smtp_conn,$line_out . $this->CRLF);
}
}
# ok all the message data has been sent so lets get this
# over with aleady
fputs($this->smtp_conn, $this->CRLF . "." . $this->CRLF);
$rply = $this->get_lines();
$code = substr($rply,0,3);
if($this->do_debug >= 2) {
echo "SMTP -> FROM SERVER:" . $this->CRLF . $rply;
}
if($code != 250) {
$this->error =
array("error" => "DATA not accepted from server",
"smtp_code" => $code,
"smtp_msg" => substr($rply,4));
if($this->do_debug >= 1) {
echo "SMTP -> ERROR: " . $this->error["error"] .
": " . $rply . $this->CRLF;
}
return false;
}
return true;
}
/*
* Expand($name)
*
* Expand takes the name and asks the server to list all the
* people who are members of the _list_. Expand will return
* back and array of the result or false if an error occurs.
* Each value in the array returned has the format of:
* [ <full-name> <sp> ] <path>
* The definition of <path> is defined in rfc 821
*
* Implements rfc 821: EXPN <SP> <string> <CRLF>
*
* SMTP CODE SUCCESS: 250
* SMTP CODE FAILURE: 550
* SMTP CODE ERROR : 500,501,502,504,421
*/
function Expand($name) {
$this->error = null; # so no confusion is caused
if(!$this->connected()) {
$this->error = array(
"error" => "Called Expand() without being connected");
return false;
}
fputs($this->smtp_conn,"EXPN " . $name . $this->CRLF);
$rply = $this->get_lines();
$code = substr($rply,0,3);
if($this->do_debug >= 2) {
echo "SMTP -> FROM SERVER:" . $this->CRLF . $rply;
}
if($code != 250) {
$this->error =
array("error" => "EXPN not accepted from server",
"smtp_code" => $code,
"smtp_msg" => substr($rply,4));
if($this->do_debug >= 1) {
echo "SMTP -> ERROR: " . $this->error["error"] .
": " . $rply . $this->CRLF;
}
return false;
}
# parse the reply and place in our array to return to user
$entries = explode($this->CRLF,$rply);
while(list(,$l) = @each($entries)) {
$list[] = substr($l,4);
}
return $rval;
}
/*
* Hello($host="")
*
* Sends the HELO command to the smtp server.
* This makes sure that we and the server are in
* the same known state.
*
* Implements from rfc 821: HELO <SP> <domain> <CRLF>
*
* SMTP CODE SUCCESS: 250
* SMTP CODE ERROR : 500, 501, 504, 421
*/
function Hello($host="") {
$this->error = null; # so no confusion is caused
if(!$this->connected()) {
$this->error = array(
"error" => "Called Hello() without being connected");
return false;
}
# if a hostname for the HELO wasn't specified determine
# a suitable one to send
if(empty($host)) {
# we need to determine some sort of appopiate default
# to send to the server
$host = "localhost";
}
fputs($this->smtp_conn,"HELO " . $host . $this->CRLF);
$rply = $this->get_lines();
$code = substr($rply,0,3);
if($this->do_debug >= 2) {
echo "SMTP -> FROM SERVER: " . $this->CRLF . $rply;
}
if($code != 250) {
$this->error =
array("error" => "HELO not accepted from server",
"smtp_code" => $code,
"smtp_msg" => substr($rply,4));
if($this->do_debug >= 1) {
echo "SMTP -> ERROR: " . $this->error["error"] .
": " . $rply . $this->CRLF;
}
return false;
}
$this->helo_rply = $rply;
return true;
}
/*
* Help($keyword="")
*
* Gets help information on the keyword specified. If the keyword
* is not specified then returns generic help, ussually contianing
* A list of keywords that help is available on. This function
* returns the results back to the user. It is up to the user to
* handle the returned data. If an error occurs then false is
* returned with $this->error set appropiately.
*
* Implements rfc 821: HELP [ <SP> <string> ] <CRLF>
*
* SMTP CODE SUCCESS: 211,214
* SMTP CODE ERROR : 500,501,502,504,421
*
*/
function Help($keyword="") {
$this->error = null; # to avoid confusion
if(!$this->connected()) {
$this->error = array(
"error" => "Called Help() without being connected");
return false;
}
$extra = "";
if(!empty($keyword)) {
$extra = " " . $keyword;
}
fputs($this->smtp_conn,"HELP" . $extra . $this->CRLF);
$rply = $this->get_lines();
$code = substr($rply,0,3);
if($this->do_debug >= 2) {
echo "SMTP -> FROM SERVER:" . $this->CRLF . $rply;
}
if($code != 211 && $code != 214) {
$this->error =
array("error" => "HELP not accepted from server",
"smtp_code" => $code,
"smtp_msg" => substr($rply,4));
if($this->do_debug >= 1) {
echo "SMTP -> ERROR: " . $this->error["error"] .
": " . $rply . $this->CRLF;
}
return false;
}
return $rply;
}
/*
* Mail($from)
*
* Starts a mail transaction from the email address specified in
* $from. Returns true if successful or false otherwise. If True
* the mail transaction is started and then one or more Recipient
* commands may be called followed by a Data command.
*
* Implements rfc 821: MAIL <SP> FROM:<reverse-path> <CRLF>
*
* SMTP CODE SUCCESS: 250
* SMTP CODE SUCCESS: 552,451,452
* SMTP CODE SUCCESS: 500,501,421
*/
function Mail($from) {
$this->error = null; # so no confusion is caused
if(!$this->connected()) {
$this->error = array(
"error" => "Called Mail() without being connected");
return false;
}
fputs($this->smtp_conn,"MAIL FROM:" . $from . $this->CRLF);
$rply = $this->get_lines();
$code = substr($rply,0,3);
if($this->do_debug >= 2) {
echo "SMTP -> FROM SERVER:" . $this->CRLF . $rply;
}
if($code != 250) {
$this->error =
array("error" => "MAIL not accepted from server",
"smtp_code" => $code,
"smtp_msg" => substr($rply,4));
if($this->do_debug >= 1) {
echo "SMTP -> ERROR: " . $this->error["error"] .
": " . $rply . $this->CRLF;
}
return false;
}
return true;
}
/*
* Noop()
*
* Sends the command NOOP to the SMTP server.
*
* Implements from rfc 821: NOOP <CRLF>
*
* SMTP CODE SUCCESS: 250
* SMTP CODE ERROR : 500, 421
*/
function Noop() {
$this->error = null; # so no confusion is caused
if(!$this->connected()) {
$this->error = array(
"error" => "Called Noop() without being connected");
return false;
}
fputs($this->smtp_conn,"NOOP" . $this->CRLF);
$rply = $this->get_lines();
$code = substr($rply,0,3);
if($this->do_debug >= 2) {
echo "SMTP -> FROM SERVER:" . $this->CRLF . $rply;
}
if($code != 250) {
$this->error =
array("error" => "NOOP not accepted from server",
"smtp_code" => $code,
"smtp_msg" => substr($rply,4));
if($this->do_debug >= 1) {
echo "SMTP -> ERROR: " . $this->error["error"] .
": " . $rply . $this->CRLF;
}
return false;
}
return true;
}
/*
* Quit($close_on_error=true)
*
* Sends the quit command to the server and then closes the socket
* if there is no error or the $close_on_error argument is true.
*
* Implements from rfc 821: QUIT <CRLF>
*
* SMTP CODE SUCCESS: 221
* SMTP CODE ERROR : 500
*/
function Quit($close_on_error=true) {
$this->error = null; # so there is no confusion
if(!$this->connected()) {
$this->error = array(
"error" => "Called Quit() without being connected");
return false;
}
# send the quit command to the server
fputs($this->smtp_conn,"quit" . $this->CRLF);
# get any good-bye messages
$byemsg = $this->get_lines();
if($this->do_debug >= 2) {
echo "SMTP -> FROM SERVER:" . $this->CRLF . $byemsg;
}
$rval = true;
$e = null;
$code = substr($byemsg,0,3);
if($code != 221) {
# use e as a tmp var cause Close will overwrite $this->error
$e = array("error" => "SMTP server rejected quit command",
"smtp_code" => $code,
"smtp_rply" => substr($byemsg,4));
$rval = false;
if($this->do_debug >= 1) {
echo "SMTP -> ERROR: " . $e["error"] . ": " .
$byemsg . $this->CRLF;
}
}
if(empty($e) || $close_on_error) {
$this->Close();
}
return $rval;
}
/*
* Recipient($to)
*
* Sends the command RCPT to the SMTP server with the TO: argument of
$to.
* Returns true if the recipient was accepted false if it was rejected.
*
* Implements from rfc 821: RCPT <SP> TO:<forward-path> <CRLF>
*
* SMTP CODE SUCCESS: 250,251
* SMTP CODE FAILURE: 550,551,552,553,450,451,452
* SMTP CODE ERROR : 500,501,503,421
*/
function Recipient($to) {
$this->error = null; # so no confusion is caused
if(!$this->connected()) {
$this->error = array(
"error" => "Called Recipient() without being
connected");
return false;
}
fputs($this->smtp_conn,"RCPT TO:" . $to . $this->CRLF);
$rply = $this->get_lines();
$code = substr($rply,0,3);
if($this->do_debug >= 2) {
echo "SMTP -> FROM SERVER:" . $this->CRLF . $rply;
}
if($code != 250 && $code != 251) {
$this->error =
array("error" => "RCPT not accepted from server",
"smtp_code" => $code,
"smtp_msg" => substr($rply,4));
if($this->do_debug >= 1) {
echo "SMTP -> ERROR: " . $this->error["error"] .
": " . $rply . $this->CRLF;
}
return false;
}
return true;
}
/*
* Reset()
*
* Sends the RSET command to abort and transaction that is
* currently in progress. Returns true if successful false
* otherwise.
*
* Implements rfc 821: RSET <CRLF>
*
* SMTP CODE SUCCESS: 250
* SMTP CODE ERROR : 500,501,504,421
*/
function Reset() {
$this->error = null; # so no confusion is caused
if(!$this->connected()) {
$this->error = array(
"error" => "Called Reset() without being connected");
return false;
}
fputs($this->smtp_conn,"RSET" . $this->CRLF);
$rply = $this->get_lines();
$code = substr($rply,0,3);
if($this->do_debug >= 2) {
echo "SMTP -> FROM SERVER:" . $this->CRLF . $rply;
}
if($code != 250) {
$this->error =
array("error" => "RSET failed",
"smtp_code" => $code,
"smtp_msg" => substr($rply,4));
if($this->do_debug >= 1) {
echo "SMTP -> ERROR: " . $this->error["error"] .
": " . $rply . $this->CRLF;
}
return false;
}
return true;
}
/*
* Send($from)
*
* Starts a mail transaction from the email address specified in
* $from. Returns true if successful or false otherwise. If True
* the mail transaction is started and then one or more Recipient
* commands may be called followed by a Data command. This command
* will send the message to the users terminal if they are logged
* in.
*
* Implements rfc 821: SEND <SP> FROM:<reverse-path> <CRLF>
*
* SMTP CODE SUCCESS: 250
* SMTP CODE SUCCESS: 552,451,452
* SMTP CODE SUCCESS: 500,501,502,421
*/
function Send($from) {
$this->error = null; # so no confusion is caused
if(!$this->connected()) {
$this->error = array(
"error" => "Called Send() without being connected");
return false;
}
fputs($this->smtp_conn,"SEND FROM:" . $from . $this->CRLF);
$rply = $this->get_lines();
$code = substr($rply,0,3);
if($this->do_debug >= 2) {
echo "SMTP -> FROM SERVER:" . $this->CRLF . $rply;
}
if($code != 250) {
$this->error =
array("error" => "SEND not accepted from server",
"smtp_code" => $code,
"smtp_msg" => substr($rply,4));
if($this->do_debug >= 1) {
echo "SMTP -> ERROR: " . $this->error["error"] .
": " . $rply . $this->CRLF;
}
return false;
}
return true;
}
/*
* SendAndMail($from)
*
* Starts a mail transaction from the email address specified in
* $from. Returns true if successful or false otherwise. If True
* the mail transaction is started and then one or more Recipient
* commands may be called followed by a Data command. This command
* will send the message to the users terminal if they are logged
* in and send them an email.
*
* Implements rfc 821: SAML <SP> FROM:<reverse-path> <CRLF>
*
* SMTP CODE SUCCESS: 250
* SMTP CODE SUCCESS: 552,451,452
* SMTP CODE SUCCESS: 500,501,502,421
*/
function SendAndMail($from) {
$this->error = null; # so no confusion is caused
if(!$this->connected()) {
$this->error = array(
"error" => "Called SendAndMail() without being connected");
return false;
}
fputs($this->smtp_conn,"SAML FROM:" . $from . $this->CRLF);
$rply = $this->get_lines();
$code = substr($rply,0,3);
if($this->do_debug >= 2) {
echo "SMTP -> FROM SERVER:" . $this->CRLF . $rply;
}
if($code != 250) {
$this->error =
array("error" => "SAML not accepted from server",
"smtp_code" => $code,
"smtp_msg" => substr($rply,4));
if($this->do_debug >= 1) {
echo "SMTP -> ERROR: " . $this->error["error"] .
": " . $rply . $this->CRLF;
}
return false;
}
return true;
}
/*
* SendOrMail($from)
*
* Starts a mail transaction from the email address specified in
* $from. Returns true if successful or false otherwise. If True
* the mail transaction is started and then one or more Recipient
* commands may be called followed by a Data command. This command
* will send the message to the users terminal if they are logged
* in or mail it to them if they are not.
*
* Implements rfc 821: SOML <SP> FROM:<reverse-path> <CRLF>
*
* SMTP CODE SUCCESS: 250
* SMTP CODE SUCCESS: 552,451,452
* SMTP CODE SUCCESS: 500,501,502,421
*/
function SendOrMail($from) {
$this->error = null; # so no confusion is caused
if(!$this->connected()) {
$this->error = array(
"error" => "Called SendOrMail() without being connected");
return false;
}
fputs($this->smtp_conn,"SOML FROM:" . $from . $this->CRLF);
$rply = $this->get_lines();
$code = substr($rply,0,3);
if($this->do_debug >= 2) {
echo "SMTP -> FROM SERVER:" . $this->CRLF . $rply;
}
if($code != 250) {
$this->error =
array("error" => "SOML not accepted from server",
"smtp_code" => $code,
"smtp_msg" => substr($rply,4));
if($this->do_debug >= 1) {
echo "SMTP -> ERROR: " . $this->error["error"] .
": " . $rply . $this->CRLF;
}
return false;
}
return true;
}
/*
* Turn()
*
* This is an optional command for SMTP that this class does not
* support. This method is here to make the RFC821 Definition
* complete for this class and __may__ be implimented in the future
*
* Implements from rfc 821: TURN <CRLF>
*
* SMTP CODE SUCCESS: 250
* SMTP CODE FAILURE: 502
* SMTP CODE ERROR : 500, 503
*/
function Turn() {
$this->error = array("error" => "This method, TURN, of the SMTP ".
"is not implemented");
if($this->do_debug >= 1) {
echo "SMTP -> NOTICE: " . $this->error["error"] . $this->CRLF;
}
return false;
}
/*
* Verify($name)
*
* Verifies that the name is recognized by the server.
* Returns false if the name could not be verified otherwise
* the response from the server is returned.
*
* Implements rfc 821: VRFY <SP> <string> <CRLF>
*
* SMTP CODE SUCCESS: 250,251
* SMTP CODE FAILURE: 550,551,553
* SMTP CODE ERROR : 500,501,502,421
*/
function Verify($name) {
$this->error = null; # so no confusion is caused
if(!$this->connected()) {
$this->error = array(
"error" => "Called Verify() without being connected");
return false;
}
fputs($this->smtp_conn,"VRFY " . $name . $this->CRLF);
$rply = $this->get_lines();
$code = substr($rply,0,3);
if($this->do_debug >= 2) {
echo "SMTP -> FROM SERVER:" . $this->CRLF . $rply;
}
if($code != 250 && $code != 251) {
$this->error =
array("error" => "VRFY failed on name '$name'",
"smtp_code" => $code,
"smtp_msg" => substr($rply,4));
if($this->do_debug >= 1) {
echo "SMTP -> ERROR: " . $this->error["error"] .
": " . $rply . $this->CRLF;
}
return false;
}
return $rply;
}
/******************************************************************
* INTERNAL FUNCTIONS *
******************************************************************/
/*
* get_lines()
*
* __internal_use_only__: read in as many lines as possible
* either before eof or socket timeout occurs on the operation.
* With SMTP we can tell if we have more lines to read if the
* 4th character is '-' symbol. If it is a space then we don't
* need to read anything else.
*/
function get_lines() {
$data = "";
while($str = fgets($this->smtp_conn,515)) {
if($this->do_debug >= 4) {
echo "SMTP -> get_lines(): \$data was \"$data\"" .
$this->CRLF;
echo "SMTP -> get_lines(): \$str is \"$str\"" .
$this->CRLF;
}
$data .= $str;
if($this->do_debug >= 4) {
echo "SMTP -> get_lines(): \$data is \"$data\"" .
$this->CRLF;
}
# if the 4th character is a space then we are done reading
# so just break the loop
if(substr($str,3,1) == " ") { break; }
}
return $data;
}
}
?>
====================================================
Index: LICENSE
GNU LESSER GENERAL PUBLIC LICENSE
Version 2.1, February 1999
Copyright (C) 1991, 1999 Free Software Foundation, Inc.
59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
Everyone is permitted to copy and distribute verbatim copies
of this license document, but changing it is not allowed.
[This is the first released version of the Lesser GPL. It also counts
as the successor of the GNU Library Public License, version 2, hence
the version number 2.1.]
Preamble
The licenses for most software are designed to take away your
freedom to share and change it. By contrast, the GNU General Public
Licenses are intended to guarantee your freedom to share and change
free software--to make sure the software is free for all its users.
This license, the Lesser General Public License, applies to some
specially designated software packages--typically libraries--of the
Free Software Foundation and other authors who decide to use it. You
can use it too, but we suggest you first think carefully about whether
this license or the ordinary General Public License is the better
strategy to use in any particular case, based on the explanations below.
When we speak of free software, we are referring to freedom of use,
not price. Our General Public Licenses are designed to make sure that
you have the freedom to distribute copies of free software (and charge
for this service if you wish); that you receive source code or can get
it if you want it; that you can change the software and use pieces of
it in new free programs; and that you are informed that you can do
these things.
To protect your rights, we need to make restrictions that forbid
distributors to deny you these rights or to ask you to surrender these
rights. These restrictions translate to certain responsibilities for
you if you distribute copies of the library or if you modify it.
For example, if you distribute copies of the library, whether gratis
or for a fee, you must give the recipients all the rights that we gave
you. You must make sure that they, too, receive or can get the source
code. If you link other code with the library, you must provide
complete object files to the recipients, so that they can relink them
with the library after making changes to the library and recompiling
it. And you must show them these terms so they know their rights.
We protect your rights with a two-step method: (1) we copyright the
library, and (2) we offer you this license, which gives you legal
permission to copy, distribute and/or modify the library.
To protect each distributor, we want to make it very clear that
there is no warranty for the free library. Also, if the library is
modified by someone else and passed on, the recipients should know
that what they have is not the original version, so that the original
author's reputation will not be affected by problems that might be
introduced by others.
Finally, software patents pose a constant threat to the existence of
any free program. We wish to make sure that a company cannot
effectively restrict the users of a free program by obtaining a
restrictive license from a patent holder. Therefore, we insist that
any patent license obtained for a version of the library must be
consistent with the full freedom of use specified in this license.
Most GNU software, including some libraries, is covered by the
ordinary GNU General Public License. This license, the GNU Lesser
General Public License, applies to certain designated libraries, and
is quite different from the ordinary General Public License. We use
this license for certain libraries in order to permit linking those
libraries into non-free programs.
When a program is linked with a library, whether statically or using
a shared library, the combination of the two is legally speaking a
combined work, a derivative of the original library. The ordinary
General Public License therefore permits such linking only if the
entire combination fits its criteria of freedom. The Lesser General
Public License permits more lax criteria for linking other code with
the library.
We call this license the "Lesser" General Public License because it
does Less to protect the user's freedom than the ordinary General
Public License. It also provides other free software developers Less
of an advantage over competing non-free programs. These disadvantages
are the reason we use the ordinary General Public License for many
libraries. However, the Lesser license provides advantages in certain
special circumstances.
For example, on rare occasions, there may be a special need to
encourage the widest possible use of a certain library, so that it becomes
a de-facto standard. To achieve this, non-free programs must be
allowed to use the library. A more frequent case is that a free
library does the same job as widely used non-free libraries. In this
case, there is little to gain by limiting the free library to free
software only, so we use the Lesser General Public License.
In other cases, permission to use a particular library in non-free
programs enables a greater number of people to use a large body of
free software. For example, permission to use the GNU C Library in
non-free programs enables many more people to use the whole GNU
operating system, as well as its variant, the GNU/Linux operating
system.
Although the Lesser General Public License is Less protective of the
users' freedom, it does ensure that the user of a program that is
linked with the Library has the freedom and the wherewithal to run
that program using a modified version of the Library.
The precise terms and conditions for copying, distribution and
modification follow. Pay close attention to the difference between a
"work based on the library" and a "work that uses the library". The
former contains code derived from the library, whereas the latter must
be combined with the library in order to run.
GNU LESSER GENERAL PUBLIC LICENSE
TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
0. This License Agreement applies to any software library or other
program which contains a notice placed by the copyright holder or
other authorized party saying it may be distributed under the terms of
this Lesser General Public License (also called "this License").
Each licensee is addressed as "you".
A "library" means a collection of software functions and/or data
prepared so as to be conveniently linked with application programs
(which use some of those functions and data) to form executables.
The "Library", below, refers to any such software library or work
which has been distributed under these terms. A "work based on the
Library" means either the Library or any derivative work under
copyright law: that is to say, a work containing the Library or a
portion of it, either verbatim or with modifications and/or translated
straightforwardly into another language. (Hereinafter, translation is
included without limitation in the term "modification".)
"Source code" for a work means the preferred form of the work for
making modifications to it. For a library, complete source code means
all the source code for all modules it contains, plus any associated
interface definition files, plus the scripts used to control compilation
and installation of the library.
Activities other than copying, distribution and modification are not
covered by this License; they are outside its scope. The act of
running a program using the Library is not restricted, and output from
such a program is covered only if its contents constitute a work based
on the Library (independent of the use of the Library in a tool for
writing it). Whether that is true depends on what the Library does
and what the program that uses the Library does.
1. You may copy and distribute verbatim copies of the Library's
complete source code as you receive it, in any medium, provided that
you conspicuously and appropriately publish on each copy an
appropriate copyright notice and disclaimer of warranty; keep intact
all the notices that refer to this License and to the absence of any
warranty; and distribute a copy of this License along with the
Library.
You may charge a fee for the physical act of transferring a copy,
and you may at your option offer warranty protection in exchange for a
fee.
2. You may modify your copy or copies of the Library or any portion
of it, thus forming a work based on the Library, and copy and
distribute such modifications or work under the terms of Section 1
above, provided that you also meet all of these conditions:
a) The modified work must itself be a software library.
b) You must cause the files modified to carry prominent notices
stating that you changed the files and the date of any change.
c) You must cause the whole of the work to be licensed at no
charge to all third parties under the terms of this License.
d) If a facility in the modified Library refers to a function or a
table of data to be supplied by an application program that uses
the facility, other than as an argument passed when the facility
is invoked, then you must make a good faith effort to ensure that,
in the event an application does not supply such function or
table, the facility still operates, and performs whatever part of
its purpose remains meaningful.
(For example, a function in a library to compute square roots has
a purpose that is entirely well-defined independent of the
application. Therefore, Subsection 2d requires that any
application-supplied function or table used by this function must
be optional: if the application does not supply it, the square
root function must still compute square roots.)
These requirements apply to the modified work as a whole. If
identifiable sections of that work are not derived from the Library,
and can be reasonably considered independent and separate works in
themselves, then this License, and its terms, do not apply to those
sections when you distribute them as separate works. But when you
distribute the same sections as part of a whole which is a work based
on the Library, the distribution of the whole must be on the terms of
this License, whose permissions for other licensees extend to the
entire whole, and thus to each and every part regardless of who wrote
it.
Thus, it is not the intent of this section to claim rights or contest
your rights to work written entirely by you; rather, the intent is to
exercise the right to control the distribution of derivative or
collective works based on the Library.
In addition, mere aggregation of another work not based on the Library
with the Library (or with a work based on the Library) on a volume of
a storage or distribution medium does not bring the other work under
the scope of this License.
3. You may opt to apply the terms of the ordinary GNU General Public
License instead of this License to a given copy of the Library. To do
this, you must alter all the notices that refer to this License, so
that they refer to the ordinary GNU General Public License, version 2,
instead of to this License. (If a newer version than version 2 of the
ordinary GNU General Public License has appeared, then you can specify
that version instead if you wish.) Do not make any other change in
these notices.
Once this change is made in a given copy, it is irreversible for
that copy, so the ordinary GNU General Public License applies to all
subsequent copies and derivative works made from that copy.
This option is useful when you wish to copy part of the code of
the Library into a program that is not a library.
4. You may copy and distribute the Library (or a portion or
derivative of it, under Section 2) in object code or executable form
under the terms of Sections 1 and 2 above provided that you accompany
it with the complete corresponding machine-readable source code, which
must be distributed under the terms of Sections 1 and 2 above on a
medium customarily used for software interchange.
If distribution of object code is made by offering access to copy
from a designated place, then offering equivalent access to copy the
source code from the same place satisfies the requirement to
distribute the source code, even though third parties are not
compelled to copy the source along with the object code.
5. A program that contains no derivative of any portion of the
Library, but is designed to work with the Library by being compiled or
linked with it, is called a "work that uses the Library". Such a
work, in isolation, is not a derivative work of the Library, and
therefore falls outside the scope of this License.
However, linking a "work that uses the Library" with the Library
creates an executable that is a derivative of the Library (because it
contains portions of the Library), rather than a "work that uses the
library". The executable is therefore covered by this License.
Section 6 states terms for distribution of such executables.
When a "work that uses the Library" uses material from a header file
that is part of the Library, the object code for the work may be a
derivative work of the Library even though the source code is not.
Whether this is true is especially significant if the work can be
linked without the Library, or if the work is itself a library. The
threshold for this to be true is not precisely defined by law.
If such an object file uses only numerical parameters, data
structure layouts and accessors, and small macros and small inline
functions (ten lines or less in length), then the use of the object
file is unrestricted, regardless of whether it is legally a derivative
work. (Executables containing this object code plus portions of the
Library will still fall under Section 6.)
Otherwise, if the work is a derivative of the Library, you may
distribute the object code for the work under the terms of Section 6.
Any executables containing that work also fall under Section 6,
whether or not they are linked directly with the Library itself.
6. As an exception to the Sections above, you may also combine or
link a "work that uses the Library" with the Library to produce a
work containing portions of the Library, and distribute that work
under terms of your choice, provided that the terms permit
modification of the work for the customer's own use and reverse
engineering for debugging such modifications.
You must give prominent notice with each copy of the work that the
Library is used in it and that the Library and its use are covered by
this License. You must supply a copy of this License. If the work
during execution displays copyright notices, you must include the
copyright notice for the Library among them, as well as a reference
directing the user to the copy of this License. Also, you must do one
of these things:
a) Accompany the work with the complete corresponding
machine-readable source code for the Library including whatever
changes were used in the work (which must be distributed under
Sections 1 and 2 above); and, if the work is an executable linked
with the Library, with the complete machine-readable "work that
uses the Library", as object code and/or source code, so that the
user can modify the Library and then relink to produce a modified
executable containing the modified Library. (It is understood
that the user who changes the contents of definitions files in the
Library will not necessarily be able to recompile the application
to use the modified definitions.)
b) Use a suitable shared library mechanism for linking with the
Library. A suitable mechanism is one that (1) uses at run time a
copy of the library already present on the user's computer system,
rather than copying library functions into the executable, and (2)
will operate properly with a modified version of the library, if
the user installs one, as long as the modified version is
interface-compatible with the version that the work was made with.
c) Accompany the work with a written offer, valid for at
least three years, to give the same user the materials
specified in Subsection 6a, above, for a charge no more
than the cost of performing this distribution.
d) If distribution of the work is made by offering access to copy
from a designated place, offer equivalent access to copy the above
specified materials from the same place.
e) Verify that the user has already received a copy of these
materials or that you have already sent this user a copy.
For an executable, the required form of the "work that uses the
Library" must include any data and utility programs needed for
reproducing the executable from it. However, as a special exception,
the materials to be distributed need not include anything that is
normally distributed (in either source or binary form) with the major
components (compiler, kernel, and so on) of the operating system on
which the executable runs, unless that component itself accompanies
the executable.
It may happen that this requirement contradicts the license
restrictions of other proprietary libraries that do not normally
accompany the operating system. Such a contradiction means you cannot
use both them and the Library together in an executable that you
distribute.
7. You may place library facilities that are a work based on the
Library side-by-side in a single library together with other library
facilities not covered by this License, and distribute such a combined
library, provided that the separate distribution of the work based on
the Library and of the other library facilities is otherwise
permitted, and provided that you do these two things:
a) Accompany the combined library with a copy of the same work
based on the Library, uncombined with any other library
facilities. This must be distributed under the terms of the
Sections above.
b) Give prominent notice with the combined library of the fact
that part of it is a work based on the Library, and explaining
where to find the accompanying uncombined form of the same work.
8. You may not copy, modify, sublicense, link with, or distribute
the Library except as expressly provided under this License. Any
attempt otherwise to copy, modify, sublicense, link with, or
distribute the Library is void, and will automatically terminate your
rights under this License. However, parties who have received copies,
or rights, from you under this License will not have their licenses
terminated so long as such parties remain in full compliance.
9. You are not required to accept this License, since you have not
signed it. However, nothing else grants you permission to modify or
distribute the Library or its derivative works. These actions are
prohibited by law if you do not accept this License. Therefore, by
modifying or distributing the Library (or any work based on the
Library), you indicate your acceptance of this License to do so, and
all its terms and conditions for copying, distributing or modifying
the Library or works based on it.
10. Each time you redistribute the Library (or any work based on the
Library), the recipient automatically receives a license from the
original licensor to copy, distribute, link with or modify the Library
subject to these terms and conditions. You may not impose any further
restrictions on the recipients' exercise of the rights granted herein.
You are not responsible for enforcing compliance by third parties with
this License.
11. If, as a consequence of a court judgment or allegation of patent
infringement or for any other reason (not limited to patent issues),
conditions are imposed on you (whether by court order, agreement or
otherwise) that contradict the conditions of this License, they do not
excuse you from the conditions of this License. If you cannot
distribute so as to satisfy simultaneously your obligations under this
License and any other pertinent obligations, then as a consequence you
may not distribute the Library at all. For example, if a patent
license would not permit royalty-free redistribution of the Library by
all those who receive copies directly or indirectly through you, then
the only way you could satisfy both it and this License would be to
refrain entirely from distribution of the Library.
If any portion of this section is held invalid or unenforceable under any
particular circumstance, the balance of the section is intended to apply,
and the section as a whole is intended to apply in other circumstances.
It is not the purpose of this section to induce you to infringe any
patents or other property right claims or to contest validity of any
such claims; this section has the sole purpose of protecting the
integrity of the free software distribution system which is
implemented by public license practices. Many people have made
generous contributions to the wide range of software distributed
through that system in reliance on consistent application of that
system; it is up to the author/donor to decide if he or she is willing
to distribute software through any other system and a licensee cannot
impose that choice.
This section is intended to make thoroughly clear what is believed to
be a consequence of the rest of this License.
12. If the distribution and/or use of the Library is restricted in
certain countries either by patents or by copyrighted interfaces, the
original copyright holder who places the Library under this License may add
an explicit geographical distribution limitation excluding those countries,
so that distribution is permitted only in or among countries not thus
excluded. In such case, this License incorporates the limitation as if
written in the body of this License.
13. The Free Software Foundation may publish revised and/or new
versions of the Lesser General Public License from time to time.
Such new versions will be similar in spirit to the present version,
but may differ in detail to address new problems or concerns.
Each version is given a distinguishing version number. If the Library
specifies a version number of this License which applies to it and
"any later version", you have the option of following the terms and
conditions either of that version or of any later version published by
the Free Software Foundation. If the Library does not specify a
license version number, you may choose any version ever published by
the Free Software Foundation.
14. If you wish to incorporate parts of the Library into other free
programs whose distribution conditions are incompatible with these,
write to the author to ask for permission. For software which is
copyrighted by the Free Software Foundation, write to the Free
Software Foundation; we sometimes make exceptions for this. Our
decision will be guided by the two goals of preserving the free status
of all derivatives of our free software and of promoting the sharing
and reuse of software generally.
NO WARRANTY
15. BECAUSE THE LIBRARY IS LICENSED FREE OF CHARGE, THERE IS NO
WARRANTY FOR THE LIBRARY, TO THE EXTENT PERMITTED BY APPLICABLE LAW.
EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR
OTHER PARTIES PROVIDE THE LIBRARY "AS IS" WITHOUT WARRANTY OF ANY
KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE
LIBRARY IS WITH YOU. SHOULD THE LIBRARY PROVE DEFECTIVE, YOU ASSUME
THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION.
16. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN
WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY
AND/OR REDISTRIBUTE THE LIBRARY AS PERMITTED ABOVE, BE LIABLE TO YOU
FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR
CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE
LIBRARY (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING
RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A
FAILURE OF THE LIBRARY TO OPERATE WITH ANY OTHER SOFTWARE), EVEN IF
SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH
DAMAGES.
END OF TERMS AND CONDITIONS
How to Apply These Terms to Your New Libraries
If you develop a new library, and you want it to be of the greatest
possible use to the public, we recommend making it free software that
everyone can redistribute and change. You can do so by permitting
redistribution under these terms (or, alternatively, under the terms of the
ordinary General Public License).
To apply these terms, attach the following notices to the library. It is
safest to attach them to the start of each source file to most effectively
convey the exclusion of warranty; and each file should have at least the
"copyright" line and a pointer to where the full notice is found.
<one line to give the library's name and a brief idea of what it does.>
Copyright (C) <year> <name of author>
This library is free software; you can redistribute it and/or
modify it under the terms of the GNU Lesser General Public
License as published by the Free Software Foundation; either
version 2.1 of the License, or (at your option) any later version.
This library is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
Lesser General Public License for more details.
You should have received a copy of the GNU Lesser General Public
License along with this library; if not, write to the Free Software
Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
Also add information on how to contact you by electronic and paper mail.
You should also get your employer (if you work as a programmer) or your
school, if any, to sign a "copyright disclaimer" for the library, if
necessary. Here is a sample; alter the names:
Yoyodyne, Inc., hereby disclaims all copyright interest in the
library `Frob' (a library for tweaking knobs) written by James Random Hacker.
<signature of Ty Coon>, 1 April 1990
Ty Coon, President of Vice
That's all there is to it!
====================================================
Index: ChangeLog.txt
ChangeLog
Version 1.41 (Wed, Aug 22 2001)
* Fixed AltBody bug w/o attachments
* Fixed rfc_date() for certain mail servers
Version 1.40 (Sun, Aug 12 2001)
* Added multipart/alternative support (AltBody)
* Documentation update
* Fixed bug in Mercury MTA
Version 1.29 (Fri, Aug 03 2001)
* Added AddStringAttachment() method
* Added SMTP authentication support
Version 1.28 (Mon, Jul 30 2001)
* Fixed a typo in SMTP class
* Fixed header issue with Imail (win32) SMTP server
* Made fopen() calls for attachments use "rb" to fix win32 error
Version 1.25 (Mon, Jul 02 2001)
* Added RFC 822 date fix (Patrice)
* Added improved error handling by adding a $ErrorInfo variable
* Removed MailerDebug variable (obsolete with new error handler)
Version 1.20 (Mon, Jun 25 2001)
* Added quoted-printable encoding (Patrice)
* Set Version as public and removed PrintVersion()
* Changed phpdoc to only display public variables and methods
Version 1.19 (Thu, Jun 21 2001)
* Fixed MS Mail header bug
* Added fix for Bcc problem with mail(). *Does not work on Win32*
(See PHP bug report: http://www.php.net/bugs.php?id=11616)
* mail() no longer passes a fifth parameter when not needed
Version 1.15 (Fri, Jun 15 2001)
[Note: these changes contributed by Patrice Fournier]
* Changed all remaining \n to \r\n
* Bcc: header no longer writen to message except
when sent directly to sendmail
* Added a small message to non-MIME compliant mail reader
* Added Sender variable to change the Sender email
used in -f for sendmail/mail and in 'MAIL FROM' for smtp mode
* Changed boundary setting to a place it will be set only once
* Removed transfer encoding for whole message when using multipart
* Message body now uses Encoding in multipart messages
* Can set encoding and type to attachments 7bit, 8bit
and binary attachment are sent as is, base64 are encoded
* Can set Encoding to base64 to send 8 bits body
through 7 bits servers
Version 1.10 (Tue, Jun 12 2001)
* Fixed win32 mail header bug (printed out headers in message body)
Version 1.09 (Fri, Jun 08 2001)
* Changed date header to work with Netscape mail programs
* Altered phpdoc documentation
Version 1.08 (Tue, Jun 05 2001)
* Added enhanced error-checking
* Added phpdoc documentation to source
Version 1.06 (Fri, Jun 01 2001)
* Added optional name for file attachments
Version 1.05 (Tue, May 29 2001)
* Code cleanup
* Eliminated sendmail header warning message
* Fixed possible SMTP error
Version 1.03 (Thu, May 24 2001)
* Fixed problem where qmail sends out duplicate messages
Version 1.02 (Wed, May 23 2001)
* Added multiple recipient and attachment Clear* methods
* Added Sendmail public variable
* Fixed problem with loading SMTP library multiple times
Version 0.98 (Tue, May 22 2001)
* Fixed problem with redundant mail hosts sending out multiple messages
* Added additional error handler code
* Added AddCustomHeader() function
* Added support for Microsoft mail client headers (affects priority)
* Fixed small bug with Mailer variable
* Added PrintVersion() function
Version 0.92 (Tue, May 15 2001)
* Changed file names to class.phpmailer.php and class.smtp.php to match
current PHP class trend.
* Fixed problem where body not being printed when a message is attached
* Several small bug fixes
Version 0.90 (Tue, April 17 2001)
* Intial public release
====================================================
Index: README
phpmailer - PHP email class
==============================
http://phpmailer.sourceforge.net
Please read LICENSE for information on this softwares availability and
distribution.
Class Features:
- Can send HTML emails, multiple attachments from the file system
or from a string or database, use multiple main and
backup SMTP servers, wrap emails for Pine and Kmail client users
- Now with SMTP authentication and multipart/alternative support
- Can send using three different mail methods: via a SMTP class, the
/usr/sbin/sendmail program (and the qmail equivalent), and the PHP
mail() function. This can be changed without changing any existing
code
- Uses the same methods as the very popular AspEmail and AspMail
Windows COM components
- Class can be extended to include new methods or replace existing
methods
- Ease transition of ASP based sites to PHP
- Expose advanced email functionality without hacking headers
- Works on both Windows and Unix
- Hopes to provide a stable and standard way to access email
functions in PHP
Why you might need it:
Many PHP developers utilize email in their code. The only PHP function
that supports this is the mail() function. However, it does not expose
any of the popular features that many email clients use nowadays like
HTML-based emails and attachments. There are two proprietary
development tools out there that have all the functionality built into
easy to use classes: AspEmail(tm) and AspMail. Both of these
programs are COM components only available on Windows. They are also a
little pricey for smaller projects.
Since I do Linux development Ive missed these tools for my PHP coding.
So I built a version myself that implements the same methods (object
calls) that the Windows-based components do. It is open source and the
LGPL license allows you to place the class in your proprietary PHP
projects.
Installation:
Copy class.phpmailer.php into your php.ini include_path. If you are
using the SMTP mailer then place class.smtp.php in your path as well.
Example
<?php
require("class.phpmailer.php");
$mail = new phpmailer();
$mail->IsSMTP(); // set mailer to use SMTP
$mail->From = "address@hidden";
$mail->FromName = "Mailer";
$mail->Host = "smtp1.site.com;smtp2.site.com"; // specify main and
backup server
$mail->AddAddress("address@hidden", "Josh Adams");
$mail->AddAddress("address@hidden"); // name is optional
$mail->AddReplyTo("address@hidden", "Information");
$mail->WordWrap = 50; // set word wrap to 50
characters
$mail->AddAttachment("/var/tmp/file.tar.gz"); // add attachments
$mail->AddAttachment("/tmp/image.jpg", "new.jpg"); // optional name
$mail->IsHTML(true); // set email format to
HTML
$mail->Subject = "Here is the subject";
$mail->Body = "This is the HTML message body <b>in bold!</b>";
$mail->AltBody = "This is the body in plain text for non-HTML mail clients";
if(!$mail->Send())
{
echo "Message could not be sent. <p>";
echo "Mailer Error: " . $mail->ErrorInfo;
exit;
}
echo "Message has been sent";
?>
CHANGELOG
See ChangeLog.txt
Download: http://sourceforge.net/project/showfiles.php?group_id=26031
Brent R. Matzelle <address@hidden>
====================================================
Index: class.phpmailer.php
<?php
////////////////////////////////////////////////////
// phpmailer - PHP email class
//
// Version 1.41, Created 08/12/2001
//
// Class for sending email using either
// sendmail, PHP mail(), or SMTP. Methods are
// based upon the standard AspEmail(tm) classes.
//
// Author: Brent R. Matzelle <address@hidden>
//
// License: LGPL, see LICENSE
////////////////////////////////////////////////////
/**
* phpmailer - PHP email transport class
* @author Brent R. Matzelle
*/
class phpmailer
{
/////////////////////////////////////////////////
// PUBLIC VARIABLES
/////////////////////////////////////////////////
/**
* Email priority (1 = High, 3 = Normal, 5 = low). Default value is 3.
* @public
* @type int
*/
var $Priority = 3;
/**
* Sets the CharSet of the message. Default value is "iso-8859-1".
* @public
* @type string
*/
var $CharSet = "iso-8859-1";
/**
* Sets the Content-type of the message. Default value is "text/plain".
* @public
* @type string
*/
var $ContentType = "text/plain";
/**
* Sets the Encoding of the message. Options for this are "8bit" (default),
* "7bit", "binary", "base64", and "quoted-printable".
* @public
* @type string
*/
var $Encoding = "8bit";
/**
* Holds the most recent mailer error message. Default value is "".
* @public
* @type string
*/
var $ErrorInfo = "";
/**
* Sets the From email address for the message. Default value is
"address@hidden".
* @public
* @type string
*/
var $From = "address@hidden";
/**
* Sets the From name of the message. Default value is "Root User".
* @public
* @type string
*/
var $FromName = "Root User";
/**
* Sets the Sender email of the message. If not empty, will be sent via -f
to sendmail
* or as 'MAIL FROM' in smtp mode. Default value is "".
* @public
* @type string
*/
var $Sender = "";
/**
* Sets the Subject of the message. Default value is "".
* @public
* @type string
*/
var $Subject = "";
/**
* Sets the Body of the message. This can be either an HTML or text body.
* If HTML then run IsHTML(true). Default value is "".
* @public
* @type string
*/
var $Body = "";
/**
* Sets the text-only body of the message. This automatically sets the
* email to multipart/alternative. This body can be read by mail
* clients that do not have HTML email capability such as mutt. Clients
* that can read HTML will view the normal Body.
* Default value is "".
* @public
* @type string
*/
var $AltBody = "";
/**
* Sets word wrapping on the message. Default value is false (off).
* @public
* @type string
*/
var $WordWrap = false;
/**
* Method to send mail: ("mail", "sendmail", or "smtp").
* Default value is "mail".
* @public
* @type string
*/
var $Mailer = "mail";
/**
* Sets the path of the sendmail program. Default value is
* "/usr/sbin/sendmail".
* @public
* @type string
*/
var $Sendmail = "/usr/sbin/sendmail";
/**
* Turns Microsoft mail client headers on and off. Default value is false
(off).
* @public
* @type bool
*/
var $UseMSMailHeaders = false;
/**
* Holds phpmailer version.
* @public
* @type string
*/
var $Version = "1.41";
/////////////////////////////////////////////////
// SMTP VARIABLES
/////////////////////////////////////////////////
/**
* Sets the SMTP hosts. All hosts must be separated by a
* semicolon (e.g. Host("smtp1.domain.com;smtp2.domain.com").
* Hosts will be tried in order.
* Default value is "localhost".
* @public
* @type string
*/
var $Host = "localhost";
/**
* Sets the SMTP server port. Default value is 25.
* @public
* @type int
*/
var $Port = 25;
/**
* Sets the CharSet of the message.
* Default value is "localhost.localdomain".
* @public
* @type string
*/
var $Helo = "localhost.localdomain";
/**
* Sets SMTP authentication. Remember to set the Username and Password.
* Default value is false (off).
* @public
* @type bool
*/
var $SMTPAuth = false;
/**
* Sets SMTP username. Default value is "".
* @public
* @type string
*/
var $Username = "";
/**
* Sets SMTP password. Default value is "".
* @public
* @type string
*/
var $Password = "";
/**
* Sets the SMTP server timeout in seconds. Does not function at this time
* because PHP for win32 does not support it. Default value is 10.
* @public
* @type int
*/
var $Timeout = 10;
/**
* Sets SMTP class debugging on or off. Default value is false (off).
* @public
* @type bool
*/
var $SMTPDebug = false;
/////////////////////////////////////////////////
// PRIVATE VARIABLES
/////////////////////////////////////////////////
/**
* Holds all "To" addresses.
* @type array
*/
var $to = array();
/**
* Holds all "CC" addresses.
* @type array
*/
var $cc = array();
/**
* Holds all "BCC" addresses.
* @type array
*/
var $bcc = array();
/**
* Holds all "Reply-To" addresses.
* @type array
*/
var $ReplyTo = array();
/**
* Holds all string and binary attachments.
* @type array
*/
var $attachment = array();
/**
* Holds all custom headers.
* @type array
*/
var $CustomHeader = array();
/**
* Holds the message boundary. Default is false.
* @type string
*/
var $boundary = false;
/**
* Holds the message boundary. This is used specifically
* when multipart/alternative messages are sent. Default is false.
* @type string
*/
var $subboundary = false;
/////////////////////////////////////////////////
// VARIABLE METHODS
/////////////////////////////////////////////////
/**
* Sets message type to HTML. Returns void.
* @public
* @returns void
*/
function IsHTML($bool) {
if($bool == true)
$this->ContentType = "text/html";
else
$this->ContentType = "text/plain";
}
/**
* Sets Mailer to send message using SMTP.
* Returns void.
* @public
* @returns void
*/
function IsSMTP() {
$this->Mailer = "smtp";
}
/**
* Sets Mailer to send message using PHP mail() function.
* Returns void.
* @public
* @returns void
*/
function IsMail() {
$this->Mailer = "mail";
}
/**
* Sets Mailer to send message using the $Sendmail program.
* Returns void.
* @public
* @returns void
*/
function IsSendmail() {
$this->Mailer = "sendmail";
}
/**
* Sets Mailer to send message using the qmail MTA. Returns void.
* @public
* @returns void
*/
function IsQmail() {
//$this->Sendmail = "/var/qmail/bin/qmail-inject";
$this->Sendmail = "/var/qmail/bin/sendmail";
$this->Mailer = "sendmail";
}
/////////////////////////////////////////////////
// RECIPIENT METHODS
/////////////////////////////////////////////////
/**
* Adds a "To" address. Returns void.
* @public
* @returns void
*/
function AddAddress($address, $name = "") {
$cur = count($this->to);
$this->to[$cur][0] = trim($address);
$this->to[$cur][1] = $name;
}
/**
* Adds a "Cc" address. Note: this function works
* with the SMTP mailer on win32, not with the "mail"
* mailer. This is a PHP bug that has been submitted
* on the Zend web site. The UNIX version of PHP
* functions correctly. Returns void.
* @public
* @returns void
*/
function AddCC($address, $name = "") {
$cur = count($this->cc);
$this->cc[$cur][0] = trim($address);
$this->cc[$cur][1] = $name;
}
/**
* Adds a "Bcc" address. Note: this function works
* with the SMTP mailer on win32, not with the "mail"
* mailer. This is a PHP bug that has been submitted
* on the Zend web site. The UNIX version of PHP
* functions correctly.
* Returns void.
* @public
* @returns void
*/
function AddBCC($address, $name = "") {
$cur = count($this->bcc);
$this->bcc[$cur][0] = trim($address);
$this->bcc[$cur][1] = $name;
}
/**
* Adds a "Reply-to" address. Returns void.
* @public
* @returns void
*/
function AddReplyTo($address, $name = "") {
$cur = count($this->ReplyTo);
$this->ReplyTo[$cur][0] = trim($address);
$this->ReplyTo[$cur][1] = $name;
}
/////////////////////////////////////////////////
// MAIL SENDING METHODS
/////////////////////////////////////////////////
/**
* Creates message and assigns Mailer. If the message is
* not sent successfully then it returns false. Returns bool.
* @public
* @returns bool
*/
function Send() {
if(count($this->to) < 1)
{
$this->error_handler("You must provide at least one recipient email
address");
return false;
}
// Set whether the message is multipart/alternative
if(!empty($this->AltBody))
$this->ContentType = "multipart/alternative";
$header = $this->create_header();
if(!$body = $this->create_body())
return false;
//echo "<pre>".$header . $body . "</pre>"; // debugging
// Choose the mailer
if($this->Mailer == "sendmail")
{
if(!$this->sendmail_send($header, $body))
return false;
}
elseif($this->Mailer == "mail")
{
if(!$this->mail_send($header, $body))
return false;
}
elseif($this->Mailer == "smtp")
{
if(!$this->smtp_send($header, $body))
return false;
}
else
{
$this->error_handler(sprintf("%s mailer is not supported",
$this->Mailer));
return false;
}
return true;
}
/**
* Sends mail using the $Sendmail program. Returns bool.
* @private
* @returns bool
*/
function sendmail_send($header, $body) {
if ($this->Sender != "")
$sendmail = sprintf("%s -f %s -t", $this->Sendmail, $this->Sender);
else
$sendmail = sprintf("%s -t", $this->Sendmail);
if(address@hidden = popen($sendmail, "w"))
{
$this->error_handler(sprintf("Could not execute %s", $this->Sendmail));
return false;
}
fputs($mail, $header);
fputs($mail, $body);
pclose($mail);
return true;
}
/**
* Sends mail using the PHP mail() function. Returns bool.
* @private
* @returns bool
*/
function mail_send($header, $body) {
//$to = substr($this->addr_append("To", $this->to), 4, -2);
// Cannot add Bcc's to the $to
$to = $this->to[0][0]; // no extra comma
for($i = 1; $i < count($this->to); $i++)
$to .= sprintf(",%s", $this->to[$i][0]);
if ($this->Sender != "" && PHP_VERSION >= "4.0")
{
$old_from = ini_get("sendmail_from");
ini_set("sendmail_from", $this->Sender);
}
if ($this->Sender != "" && PHP_VERSION >= "4.0.5")
{
// The fifth parameter to mail is only available in PHP >= 4.0.5
$params = sprintf("-f %s", $this->Sender);
$rt = @mail($to, $this->Subject, $body, $header, $params);
}
else
{
$rt = @mail($to, $this->Subject, $body, $header);
}
if (isset($old_from))
ini_set("sendmail_from", $old_from);
if(!$rt)
{
$this->error_handler("Could not instantiate mail()");
return false;
}
return true;
}
/**
* Sends mail via SMTP using PhpSMTP (Author:
* Chris Ryan). Returns bool.
* @private
* @returns bool
*/
function smtp_send($header, $body) {
// Include SMTP class code, but not twice
include_once("class.smtp.php"); // Load code only if asked
$smtp = new SMTP;
$smtp->do_debug = $this->SMTPDebug;
// Try to connect to all SMTP servers
$hosts = explode(";", $this->Host);
$index = 0;
$connection = false;
// Retry while there is no connection
while($index < count($hosts) && $connection == false)
{
if($smtp->Connect($hosts[$index], $this->Port, $this->Timeout))
$connection = true;
//printf("%s host could not connect<br>", $hosts[$index]); //debug only
$index++;
}
if(!$connection)
{
$this->error_handler("SMTP Error: could not connect to SMTP host
server(s)");
return false;
}
// Must perform HELO before authentication
$smtp->Hello($this->Helo);
// If user requests SMTP authentication
if($this->SMTPAuth)
{
if(!$smtp->Authenticate($this->Username, $this->Password))
{
$this->error_handler("SMTP Error: Could not authenticate");
return false;
}
}
if ($this->Sender == "")
$smtp->Mail(sprintf("<%s>", $this->From));
else
$smtp->Mail(sprintf("<%s>", $this->Sender));
for($i = 0; $i < count($this->to); $i++)
$smtp->Recipient(sprintf("<%s>", $this->to[$i][0]));
for($i = 0; $i < count($this->cc); $i++)
$smtp->Recipient(sprintf("<%s>", $this->cc[$i][0]));
for($i = 0; $i < count($this->bcc); $i++)
$smtp->Recipient(sprintf("<%s>", $this->bcc[$i][0]));
if(!$smtp->Data(sprintf("%s%s", $header, $body)))
{
$this->error_handler("SMTP Error: Data not accepted");
return false;
}
$smtp->Quit();
return true;
}
/////////////////////////////////////////////////
// MESSAGE CREATION METHODS
/////////////////////////////////////////////////
/**
* Creates recipient headers. Returns string.
* @private
* @returns string
*/
function addr_append($type, $addr) {
$addr_str = "";
$addr_str .= sprintf("%s: %s <%s>", $type, $addr[0][1], $addr[0][0]);
if(count($addr) > 1)
{
for($i = 1; $i < count($addr); $i++)
{
$addr_str .= sprintf(", %s <%s>", $addr[$i][1], $addr[$i][0]);
}
$addr_str .= "\r\n";
}
else
$addr_str .= "\r\n";
return($addr_str);
}
/**
* Wraps message for use with mailers that do not
* automatically perform wrapping and for quoted-printable.
* Original written by philippe. Returns string.
* @private
* @returns string
*/
function wordwrap($message, $length, $qp_mode = false) {
if ($qp_mode)
$soft_break = " =\r\n";
else
$soft_break = "\r\n";
$message = $this->fix_eol($message);
if (substr($message, -1) == "\r\n")
$message = substr($message, 0, -2);
$line = explode("\r\n", $message);
$message = "";
for ($i=0 ;$i < count($line); $i++)
{
$line_part = explode(" ", trim($line[$i]));
$buf = "";
for ($e = 0; $e<count($line_part); $e++)
{
$word = $line_part[$e];
if ($qp_mode and (strlen($word) > $length))
{
$space_left = $length - strlen($buf) - 1;
if ($e != 0)
{
if ($space_left > 20)
{
$len = $space_left;
if (substr($word, $len - 1, 1) == "=")
$len--;
elseif (substr($word, $len - 2, 1) == "=")
$len -= 2;
$part = substr($word, 0, $len);
$word = substr($word, $len);
$buf .= " " . $part;
$message .= $buf . "=\r\n";
}
else
{
$message .= $buf . $soft_break;
}
$buf = "";
}
while (strlen($word) > 0)
{
$len = $length;
if (substr($word, $len - 1, 1) == "=")
$len--;
elseif (substr($word, $len - 2, 1) == "=")
$len -= 2;
$part = substr($word, 0, $len);
$word = substr($word, $len);
if (strlen($word) > 0)
$message .= $part . "=\r\n";
else
$buf = $part;
}
}
else
{
$buf_o = $buf;
if ($e == 0)
$buf .= $word;
else
$buf .= " " . $word;
if (strlen($buf) > $length and $buf_o != "")
{
$message .= $buf_o . $soft_break;
$buf = $word;
}
}
}
$message .= $buf . "\r\n";
}
return ($message);
}
/**
* Assembles message header. Returns a string if successful
* or false if unsuccessful.
* @private
* @returns string
*/
function create_header() {
$header = array();
$header[] = sprintf("Date: %s\r\n", $this->rfc_date());
// To be created automatically by mail()
if($this->Mailer != "mail")
$header[] = $this->addr_append("To", $this->to);
$header[] = sprintf("From: %s <%s>\r\n", $this->FromName,
trim($this->From));
if(count($this->cc) > 0)
$header[] = $this->addr_append("Cc", $this->cc);
// sendmail and mail() extract Bcc from the header before sending
if((($this->Mailer == "sendmail") || ($this->Mailer == "mail")) &&
(count($this->bcc) > 0))
$header[] = $this->addr_append("Bcc", $this->bcc);
if(count($this->ReplyTo) > 0)
$header[] = $this->addr_append("Reply-to", $this->ReplyTo);
// mail() sets the subject itself
if($this->Mailer != "mail")
$header[] = sprintf("Subject: %s\r\n", trim($this->Subject));
$header[] = sprintf("X-Priority: %d\r\n", $this->Priority);
$header[] = sprintf("X-Mailer: phpmailer [version %s]\r\n",
$this->Version);
$header[] = sprintf("Return-Path: %s\r\n", trim($this->From));
// Add custom headers
for($index = 0; $index < count($this->CustomHeader); $index++)
$header[] = sprintf("%s\r\n", $this->CustomHeader[$index]);
if($this->UseMSMailHeaders)
$header[] = $this->AddMSMailHeaders();
$header[] = "MIME-Version: 1.0\r\n";
// Add all attachments
if(count($this->attachment) > 0 || !empty($this->AltBody))
{
// Set message boundary
$this->boundary = "_b" . md5(uniqid(time()));
// Set message subboundary for multipart/alternative
$this->subboundary = "_sb" . md5(uniqid(time()));
$header[] = "Content-Type: Multipart/Mixed;\r\n";
$header[] = sprintf(" boundary=\"Boundary-=%s\"\r\n\r\n",
$this->boundary);
}
else
{
$header[] = sprintf("Content-Transfer-Encoding: %s\r\n",
$this->Encoding);
$header[] = sprintf("Content-Type: %s; charset = \"%s\"\r\n\r\n",
$this->ContentType, $this->CharSet);
}
return(join("", $header));
}
/**
* Assembles the message body. Returns a string if successful
* or false if unsuccessful.
* @private
* @returns string
*/
function create_body() {
// wordwrap the message body if set
if($this->WordWrap)
$this->Body = $this->wordwrap($this->Body, $this->WordWrap);
// If content type is multipart/alternative set body like this:
if ((!empty($this->AltBody)) && (count($this->attachment) < 1))
{
// Return text of body
$mime = array();
$mime[] = "This is a MIME message. If you are reading this text,
you\r\n";
$mime[] = "might want to consider changing to a mail reader that\r\n";
$mime[] = "understands how to properly display MIME multipart
messages.\r\n\r\n";
$mime[] = sprintf("--Boundary-=%s\r\n", $this->boundary);
// Insert body. If multipart/alternative, insert both html and plain
$mime[] = sprintf("Content-Type: %s; charset = \"%s\"; boundary =
\"Boundary-=%s\";\r\n",
$this->ContentType, $this->CharSet,
$this->subboundary);
$mime[] = sprintf("Content-Transfer-Encoding: %s\r\n\r\n",
$this->Encoding);
$mime[] = sprintf("--Boundary-=%s\r\n", $this->subboundary);
$mime[] = sprintf("Content-Type: text/html; charset = \"%s\";\r\n",
$this->CharSet);
$mime[] = sprintf("Content-Transfer-Encoding: %s\r\n\r\n",
$this->Encoding);
$mime[] = sprintf("%s\r\n\r\n", $this->Body);
$mime[] = sprintf("--Boundary-=%s\r\n", $this->subboundary);
$mime[] = sprintf("Content-Type: text/plain; charset = \"%s\";\r\n",
$this->CharSet);
$mime[] = sprintf("Content-Transfer-Encoding: %s\r\n\r\n",
$this->Encoding);
$mime[] = sprintf("%s\r\n\r\n", $this->AltBody);
$mime[] = sprintf("\r\n--Boundary-=%s--\r\n\r\n", $this->subboundary);
$mime[] = sprintf("\r\n--Boundary-=%s--\r\n", $this->boundary);
$this->Body = $this->encode_string(join("", $mime), $this->Encoding);
}
else
{
$this->Body = $this->encode_string($this->Body, $this->Encoding);
}
if(count($this->attachment) > 0)
{
if(!$body = $this->attach_all())
return false;
}
else
$body = $this->Body;
return($body);
}
/////////////////////////////////////////////////
// ATTACHMENT METHODS
/////////////////////////////////////////////////
/**
* Adds an attachment from the OS filesystem.
* Checks if attachment is valid and then adds
* the attachment to the list.
* Returns false if the file was not found.
* @public
* @returns bool
*/
function AddAttachment($path, $name = "", $encoding = "base64", $type =
"application/octet-stream") {
if(address@hidden($path))
{
$this->error_handler(sprintf("Could not find %s file on filesystem",
$path));
return false;
}
$filename = basename($path);
if($name == "")
$name = $filename;
// Append to $attachment array
$cur = count($this->attachment);
$this->attachment[$cur][0] = $path;
$this->attachment[$cur][1] = $filename;
$this->attachment[$cur][2] = $name;
$this->attachment[$cur][3] = $encoding;
$this->attachment[$cur][4] = $type;
$this->attachment[$cur][5] = false; // isStringAttachment
return true;
}
/**
* Attaches all fs, string, and binary attachments to the message.
* Returns a string if successful or false if unsuccessful.
* @private
* @returns string
*/
function attach_all() {
// Return text of body
$mime = array();
$mime[] = "This is a MIME message. If you are reading this text, you\r\n";
$mime[] = "might want to consider changing to a mail reader that\r\n";
$mime[] = "understands how to properly display MIME multipart
messages.\r\n\r\n";
$mime[] = sprintf("--Boundary-=%s\r\n", $this->boundary);
// Insert body. If multipart/alternative, insert both html and plain.
if (!empty($this->AltBody))
{
$mime[] = sprintf("Content-Type: %s; charset = \"%s\"; boundary =
\"Boundary-=%s\";\r\n",
$this->ContentType, $this->CharSet,
$this->subboundary);
$mime[] = sprintf("Content-Transfer-Encoding: %s\r\n\r\n",
$this->Encoding);
$mime[] = sprintf("--Boundary-=%s\r\n", $this->subboundary);
$mime[] = sprintf("Content-Type: text/html; charset = \"%s\";\r\n",
$this->CharSet);
$mime[] = sprintf("Content-Transfer-Encoding: %s\r\n\r\n",
$this->Encoding);
$mime[] = sprintf("%s\r\n\r\n", $this->Body);
$mime[] = sprintf("--Boundary-=%s\r\n", $this->subboundary);
$mime[] = sprintf("Content-Type: text/plain; charset = \"%s\";\r\n",
$this->CharSet);
$mime[] = sprintf("Content-Transfer-Encoding: %s\r\n\r\n",
$this->Encoding);
$mime[] = sprintf("%s\r\n\r\n", $this->AltBody);
$mime[] = sprintf("\r\n--Boundary-=%s--\r\n\r\n", $this->subboundary);
}
else
{
$mime[] = sprintf("Content-Type: %s; charset = \"%s\";\r\n",
$this->ContentType, $this->CharSet);
$mime[] = sprintf("Content-Transfer-Encoding: %s\r\n\r\n",
$this->Encoding);
$mime[] = sprintf("%s\r\n", $this->Body);
}
// Add all attachments
for($i = 0; $i < count($this->attachment); $i++)
{
// Check for string attachment
$isString = $this->attachment[$i][5];
if ($isString)
{
$string = $this->attachment[$i][0];
}
else
{
$path = $this->attachment[$i][0];
}
$filename = $this->attachment[$i][1];
$name = $this->attachment[$i][2];
$encoding = $this->attachment[$i][3];
$type = $this->attachment[$i][4];
$mime[] = sprintf("--Boundary-=%s\r\n", $this->boundary);
$mime[] = sprintf("Content-Type: %s; ", $type);
$mime[] = sprintf("name=\"%s\"\r\n", $name);
$mime[] = sprintf("Content-Transfer-Encoding: %s\r\n", $encoding);
$mime[] = sprintf("Content-Disposition: attachment;
filename=\"%s\"\r\n\r\n", $name);
// Encode as string attachment
if($isString)
{
if(!$mime[] = sprintf("%s\r\n\r\n", $this->encode_string($string,
$encoding)))
return false;
}
else
{
if(!$mime[] = sprintf("%s\r\n\r\n", $this->encode_file($path,
$encoding)))
return false;
}
}
$mime[] = sprintf("\r\n--Boundary-=%s--\r\n", $this->boundary);
return(join("", $mime));
}
/**
* Encodes attachment in requested format. Returns a
* string if successful or false if unsuccessful.
* @private
* @returns string
*/
function encode_file ($path, $encoding = "base64") {
if(address@hidden = fopen($path, "rb"))
{
$this->error_handler(sprintf("File Error: Could not open file %s",
$path));
return false;
}
$file = fread($fd, filesize($path));
$encoded = $this->encode_string($file, $encoding);
fclose($fd);
return($encoded);
}
/**
* Encodes string to requested format. Returns a
* string if successful or false if unsuccessful.
* @private
* @returns string
*/
function encode_string ($str, $encoding = "base64") {
switch(strtolower($encoding)) {
case "base64":
// chunk_split is found in PHP >= 3.0.6
$encoded = chunk_split(base64_encode($str));
break;
case "7bit":
case "8bit":
$encoded = $this->fix_eol($str);
if (substr($encoded, -2) != "\r\n")
$encoded .= "\r\n";
break;
case "binary":
$encoded = $str;
break;
case "quoted-printable":
$encoded = $this->encode_qp($str);
break;
default:
$this->error_handler(sprintf("Unknown encoding: %s", $encoding));
return false;
}
return($encoded);
}
/**
* Encode string to quoted-printable. Returns a string.
* @private
* @returns string
*/
function encode_qp ($str) {
$encoded = $this->fix_eol($str);
if (substr($encoded, -2) != "\r\n")
$encoded .= "\r\n";
// Replace every high ascii, control and = characters
$encoded = preg_replace("/([\001-\010\013\014\016-\037\075\177-\377])/e",
"'='.sprintf('%02X', ord('\\1'))", $encoded);
// Replace every spaces and tabs when it's the last character on a line
$encoded = preg_replace("/([\011\040])\r\n/e",
"'='.sprintf('%02X', ord('\\1')).'\r\n'", $encoded);
// Maximum line length of 76 characters before CRLF (74 + space + '=')
$encoded = $this->WordWrap($encoded, 74, true);
return $encoded;
}
/**
* Adds a string or binary attachment (non-filesystem) to the list.
* This method can be used to attach ascii or binary data,
* such as a BLOB record from a database.
* @public
* @returns void
*/
function AddStringAttachment($string, $filename, $encoding = "binary", $type
= "application/octet-stream") {
// Append to $attachment array
$cur = count($this->attachment);
$this->attachment[$cur][0] = $string;
$this->attachment[$cur][1] = $filename;
$this->attachment[$cur][2] = $filename;
$this->attachment[$cur][3] = $encoding;
$this->attachment[$cur][4] = $type;
$this->attachment[$cur][5] = true; // isString
}
/////////////////////////////////////////////////
// MESSAGE RESET METHODS
/////////////////////////////////////////////////
/**
* Clears all recipients assigned in the TO array. Returns void.
* @public
* @returns void
*/
function ClearAddresses() {
$this->to = array();
}
/**
* Clears all recipients assigned in the CC array. Returns void.
* @public
* @returns void
*/
function ClearCCs() {
$this->cc = array();
}
/**
* Clears all recipients assigned in the BCC array. Returns void.
* @public
* @returns void
*/
function ClearBCCs() {
$this->bcc = array();
}
/**
* Clears all recipients assigned in the ReplyTo array. Returns void.
* @public
* @returns void
*/
function ClearReplyTos() {
$this->ReplyTo = array();
}
/**
* Clears all recipients assigned in the TO, CC and BCC
* array. Returns void.
* @public
* @returns void
*/
function ClearAllRecipients() {
$this->to = array();
$this->cc = array();
$this->bcc = array();
}
/**
* Clears all previously set filesystem, string, and binary
* attachments. Returns void.
* @public
* @returns void
*/
function ClearAttachments() {
$this->attachment = array();
}
/**
* Clears all custom headers. Returns void.
* @public
* @returns void
*/
function ClearCustomHeaders() {
$this->CustomHeader = array();
}
/////////////////////////////////////////////////
// MISCELLANEOUS METHODS
/////////////////////////////////////////////////
/**
* Adds the error message to the error container.
* Returns void.
* @private
* @returns void
*/
function error_handler($msg) {
$this->ErrorInfo = $msg;
}
/**
* Returns the proper RFC 822 formatted date. Returns string.
* @private
* @returns string
*/
function rfc_date() {
$tz = date("Z");
$tzs = ($tz < 0) ? "-" : "+";
$tz = abs($tz);
$tz = ($tz/3600)*100 + ($tz%3600)/60;
$date = sprintf("%s %s%04d", date("D, j M Y H:i:s"), $tzs, $tz);
return $date;
}
/**
* Changes every end of line from CR or LF to CRLF. Returns string.
* @private
* @returns string
*/
function fix_eol($str) {
$str = str_replace("\r\n", "\n", $str);
$str = str_replace("\r", "\n", $str);
$str = str_replace("\n", "\r\n", $str);
return $str;
}
/**
* Adds a custom header. Returns void.
* @public
* @returns void
*/
function AddCustomHeader($custom_header) {
$this->CustomHeader[] = $custom_header;
}
/**
* Adds all the Microsoft message headers. Returns string.
* @private
* @returns string
*/
function AddMSMailHeaders() {
$MSHeader = "";
if($this->Priority == 1)
$MSPriority = "High";
elseif($this->Priority == 5)
$MSPriority = "Low";
else
$MSPriority = "Medium";
$MSHeader .= sprintf("X-MSMail-Priority: %s\r\n", $MSPriority);
$MSHeader .= sprintf("Importance: %s\r\n", $MSPriority);
return($MSHeader);
}
}
// End of class
?>
- [Phpgroupware-cvs] old/squirrelmail/src/phpmailer-1.41 class.smtp.php, 1.1 LICENSE, 1.1 ChangeLog.txt, 1.1 README, 1.1 class.phpmailer.php, 1.1, (continued)
- [Phpgroupware-cvs] old/squirrelmail/src/phpmailer-1.41 class.smtp.php, 1.1 LICENSE, 1.1 ChangeLog.txt, 1.1 README, 1.1 class.phpmailer.php, 1.1, skwashd, 2005/05/07
- [Phpgroupware-cvs] old/squirrelmail/src/phpmailer-1.41 class.smtp.php, 1.1 LICENSE, 1.1 ChangeLog.txt, 1.1 README, 1.1 class.phpmailer.php, 1.1, skwashd, 2005/05/07
- [Phpgroupware-cvs] old/squirrelmail/src/phpmailer-1.41 class.smtp.php, 1.1 LICENSE, 1.1 ChangeLog.txt, 1.1 README, 1.1 class.phpmailer.php, 1.1, skwashd, 2005/05/07
- [Phpgroupware-cvs] old/squirrelmail/src/phpmailer-1.41 class.smtp.php, 1.1 LICENSE, 1.1 ChangeLog.txt, 1.1 README, 1.1 class.phpmailer.php, 1.1, skwashd, 2005/05/07
- [Phpgroupware-cvs] old/squirrelmail/src/phpmailer-1.41 class.smtp.php, 1.1 LICENSE, 1.1 ChangeLog.txt, 1.1 README, 1.1 class.phpmailer.php, 1.1, skwashd, 2005/05/07
- [Phpgroupware-cvs] old/squirrelmail/src/phpmailer-1.41 class.smtp.php, 1.1 LICENSE, 1.1 ChangeLog.txt, 1.1 README, 1.1 class.phpmailer.php, 1.1, skwashd, 2005/05/07
- [Phpgroupware-cvs] old/squirrelmail/src/phpmailer-1.41 class.smtp.php, 1.1 LICENSE, 1.1 ChangeLog.txt, 1.1 README, 1.1 class.phpmailer.php, 1.1, skwashd, 2005/05/07
- [Phpgroupware-cvs] old/squirrelmail/src/phpmailer-1.41 class.smtp.php, 1.1 LICENSE, 1.1 ChangeLog.txt, 1.1 README, 1.1 class.phpmailer.php, 1.1, skwashd, 2005/05/07
- [Phpgroupware-cvs] old/squirrelmail/src/phpmailer-1.41 class.smtp.php, 1.1 LICENSE, 1.1 ChangeLog.txt, 1.1 README, 1.1 class.phpmailer.php, 1.1, skwashd, 2005/05/07
- [Phpgroupware-cvs] old/squirrelmail/src/phpmailer-1.41 class.smtp.php, 1.1 LICENSE, 1.1 ChangeLog.txt, 1.1 README, 1.1 class.phpmailer.php, 1.1, skwashd, 2005/05/07
- [Phpgroupware-cvs] old/squirrelmail/src/phpmailer-1.41 class.smtp.php, 1.1 LICENSE, 1.1 ChangeLog.txt, 1.1 README, 1.1 class.phpmailer.php, 1.1,
skwashd <=
- [Phpgroupware-cvs] old/squirrelmail/src/phpmailer-1.41 class.smtp.php, 1.1 LICENSE, 1.1 ChangeLog.txt, 1.1 README, 1.1 class.phpmailer.php, 1.1, skwashd, 2005/05/07
- [Phpgroupware-cvs] old/squirrelmail/src/phpmailer-1.41 class.smtp.php, 1.1 LICENSE, 1.1 ChangeLog.txt, 1.1 README, 1.1 class.phpmailer.php, 1.1, skwashd, 2005/05/07
- [Phpgroupware-cvs] old/squirrelmail/src/phpmailer-1.41 class.smtp.php, 1.1 LICENSE, 1.1 ChangeLog.txt, 1.1 README, 1.1 class.phpmailer.php, 1.1, skwashd, 2005/05/07
- [Phpgroupware-cvs] old/squirrelmail/src/phpmailer-1.41 class.smtp.php, 1.1 LICENSE, 1.1 ChangeLog.txt, 1.1 README, 1.1 class.phpmailer.php, 1.1, skwashd, 2005/05/08
- [Phpgroupware-cvs] old/squirrelmail/src/phpmailer-1.41 class.smtp.php, 1.1 LICENSE, 1.1 ChangeLog.txt, 1.1 README, 1.1 class.phpmailer.php, 1.1, skwashd, 2005/05/08
- [Phpgroupware-cvs] old/squirrelmail/src/phpmailer-1.41 class.smtp.php, 1.1 LICENSE, 1.1 ChangeLog.txt, 1.1 README, 1.1 class.phpmailer.php, 1.1, skwashd, 2005/05/08
- [Phpgroupware-cvs] old/squirrelmail/src/phpmailer-1.41 class.smtp.php, 1.1 LICENSE, 1.1 ChangeLog.txt, 1.1 README, 1.1 class.phpmailer.php, 1.1, skwashd, 2005/05/08
- [Phpgroupware-cvs] old/squirrelmail/src/phpmailer-1.41 class.smtp.php, 1.1 LICENSE, 1.1 ChangeLog.txt, 1.1 README, 1.1 class.phpmailer.php, 1.1, skwashd, 2005/05/08
- [Phpgroupware-cvs] old/squirrelmail/src/phpmailer-1.41 class.smtp.php, 1.1 LICENSE, 1.1 ChangeLog.txt, 1.1 README, 1.1 class.phpmailer.php, 1.1, skwashd, 2005/05/08
- [Phpgroupware-cvs] old/squirrelmail/src/phpmailer-1.41 class.smtp.php, 1.1 LICENSE, 1.1 ChangeLog.txt, 1.1 README, 1.1 class.phpmailer.php, 1.1, skwashd, 2005/05/08
- Prev by Date:
[Phpgroupware-cvs] old/anthill/backend/template/default theme.php, 1.1 style.css, 1.1
- Next by Date:
[Phpgroupware-cvs] old/filemanager/debian changelog, 1.2 rules, 1.2 copyright, 1.2 control, 1.2
- Previous by thread:
[Phpgroupware-cvs] old/squirrelmail/src/phpmailer-1.41 class.smtp.php, 1.1 LICENSE, 1.1 ChangeLog.txt, 1.1 README, 1.1 class.phpmailer.php, 1.1
- Next by thread:
[Phpgroupware-cvs] old/squirrelmail/src/phpmailer-1.41 class.smtp.php, 1.1 LICENSE, 1.1 ChangeLog.txt, 1.1 README, 1.1 class.phpmailer.php, 1.1
- Index(es):