RE: PSPPire on Windows: Increase the number of decimal places of regression analysis

[Yoshi]

Hi Oliver and John, thanks for your reply. I'm still struggling. What I did
was as the following and further advice would be appreciated.

1 On the syntax editor window, File->Open->, open repairs.sav in c://Program
Files/PSPP/share/pspp/examples (repairs_sav.JPG)

2 Open syntax editor (File->New->Syntax)

3 On the syntax editor window, enter command, 
SET FORMAT F22.6
EXECUTE. (SyntaxEditor1.JPG)

4 On PSPPire data editor window of repairs.sav, Analyze-Descriptive
Statistics-Crosstabs, Rows: mtbf and Columns: mttr;
5 Results on PSPPire output viewer of Chi-square tests are only 2 decimal
places, e.g. Pearson Chi-Square 210.00, Likelihood Ratio 81.24 etc.
(Chi-square1.JPG)

The numbers of decimal places are the same for other methods including
regression analysis.

What I want to obtain is 6 decimal places results on the Output Viewer
window. Thank you for your further help.

Sincerely
Yoshi

-----Original Message-----
From: John Darrington [mailto:address@hidden 
Sent: Tuesday, July 26, 2016 10:51 PM
To: Dr. Oliver Walter
Cc: Yoshi; address@hidden
Subject: Re: PSPPire on Windows: Increase the number of decimal places
ofregression analysis

Yes of course.  :) 

You can't give pspp commands to a DOS command line!!

On Tue, Jul 26, 2016 at 09:40:00AM +0200, Dr. Oliver Walter wrote:
     You have to put the command in the syntax editor of PSPPire and execute
it.
     It works.
     
     Sincerely,
     
     Oliver
     
     ----- Original Message ----- From: "Yoshi" <address@hidden>
     To: <address@hidden>
     Sent: Tuesday, July 26, 2016 9:05 AM
     Subject: RE: PSPPire on Windows: Increase the number of decimal places
     ofregression analysis
     
     
     >Thanks John for your reply.
     >
     >I have tried the command using the Windows command prompt, however, I
have
     >received the following errors. I conducted SET FORMAT command before
and
     >after starting of the SPSSire, but received errors for both. Further
reply
     >will be appreciated.
     >
     >C:\Program Files\PSPP\bin>SET FORMAT F22.6
     >Environment variable FORMAT F22.6 not defined
     >
     >C:\Program Files\PSPP\bin>PSPPIRE
     >
     >C:\Program Files\PSPP\bin>SET FORMAT F22.6
     >Environment variable FORMAT F22.6 not defined
     >
     >Sincerely
     >Yoshi
     >
     >-----Original Message-----
     >From: John Darrington [mailto:address@hidden
     >Sent: Tuesday, July 26, 2016 4:49 PM
     >To: Yoshi
     >Cc: address@hidden
     >Subject: Re: PSPPire on Windows: Increase the number of decimal places
of
     >regression analysis
     >
     >On Tue, Jul 26, 2016 at 12:47:18PM +1200, Yoshi wrote:
     >    Hi
     >
     >    I am using PSPPire on windows 0.10.1-g1082b8. I want to increase
the
     >number
     >    of decimal places of regression analysis result, which seems to be
set
     >to 2
     >    in the default setting.
     >
     >    I have found the information to increase the results to 6 decimal
     >places on
     >    the manual (https://www.gun.org/software/pspp/faq.html#Precision),
     >which may
     >    be used for Command mode version, but I want to know the method
for
     >the
     >    PSPPire version.
     >
     >
     >It is exactly the same method.  It works for both pspp and psppire.
     >
     >J'
     >
     >
     >-- 
     >Avoid eavesdropping.  Send strong encryted email.
     >PGP Public key ID: 1024D/2DE827B3
     >fingerprint = 8797 A26D 0854 2EAB 0285  A290 8A67 719C 2DE8 27B3
     >See http://sks-keyservers.net or any PGP keyserver for public key.
     >
     >
     >
     >_______________________________________________
     >Pspp-users mailing list
     >address@hidden
     >https://lists.gnu.org/mailman/listinfo/pspp-users
     >
     
     
     _______________________________________________
     Pspp-users mailing list
     address@hidden
     https://lists.gnu.org/mailman/listinfo/pspp-users

-- 
Avoid eavesdropping.  Send strong encryted email.
PGP Public key ID: 1024D/2DE827B3 
fingerprint = 8797 A26D 0854 2EAB 0285  A290 8A67 719C 2DE8 27B3
See http://sks-keyservers.net or any PGP keyserver for public key.

repairs_sav.JPG
Description: JPEG image

SyntaxEditor1.JPG
Description: JPEG image

Chi-square1.JPG
Description: JPEG image