qemu-arm
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Qemu-arm] [PATCH] target-arm: Implement MDCR_EL3.TPM and MDCR_EL2.T


From: Sergey Fedorov
Subject: Re: [Qemu-arm] [PATCH] target-arm: Implement MDCR_EL3.TPM and MDCR_EL2.TPM traps
Date: Fri, 19 Feb 2016 16:40:27 +0300
User-agent: Mozilla/5.0 (X11; Linux x86_64; rv:38.0) Gecko/20100101 Thunderbird/38.5.1

On 19.02.2016 14:26, Peter Maydell wrote:
> Implement the performance monitor register traps controlled
> by MDCR_EL3.TPM and MDCR_EL2.TPM. Most of the performance
> registers already have an access function to deal with the
> user-enable bit, and the TPM checks can be added there. We
> also need a new access function which only implements the
> TPM checks for use by the few not-EL0-accessible registers
> and by PMUSERENR_EL0 (which is always EL0-readable).
>
> Signed-off-by: Peter Maydell <address@hidden>
> ---
> I think this is the last of the EL3 traps we need to implement...
>
> Alistair, now we have these two access functions can you check
> that any new perf registers that are added in the patches you've
> got pending use the right accessfn? (I'll probably catch it in
> code review if you forget, but basing on top of this patch will
> hopefully avoid unnecessary merge conflicts.)
>
> thanks
> -- PMM
>
>  target-arm/helper.c | 43 ++++++++++++++++++++++++++++++++++++-------
>  1 file changed, 36 insertions(+), 7 deletions(-)
>
> diff --git a/target-arm/helper.c b/target-arm/helper.c
> index 3d7fda1..e7dbc02 100644
> --- a/target-arm/helper.c
> +++ b/target-arm/helper.c
> @@ -439,6 +439,24 @@ static CPAccessResult access_tda(CPUARMState *env, const 
> ARMCPRegInfo *ri,
>      return CP_ACCESS_OK;
>  }
>  
> +/* Check for traps to performance monitor registers, which are controlled
> + * by MDCR_EL2.TPM for EL2 and MDCR_EL3.TPM for EL3.
> + */
> +static CPAccessResult access_tpm(CPUARMState *env, const ARMCPRegInfo *ri,
> +                                 bool isread)
> +{
> +    int el = arm_current_el(env);
> +
> +    if (el < 2 && (env->cp15.mdcr_el2 & MDCR_TPM)
> +        && !arm_is_secure_below_el3(env)) {
> +        return CP_ACCESS_TRAP_EL2;
> +    }
> +    if (el < 3 && (env->cp15.mdcr_el3 & MDCR_TPM)) {
> +        return CP_ACCESS_TRAP_EL3;

This trap is only possible if EL3 is using AArch64.

> +    }
> +    return CP_ACCESS_OK;
> +}
> +
>  static void dacr_write(CPUARMState *env, const ARMCPRegInfo *ri, uint64_t 
> value)
>  {
>      ARMCPU *cpu = arm_env_get_cpu(env);
> @@ -774,11 +792,22 @@ static CPAccessResult pmreg_access(CPUARMState *env, 
> const ARMCPRegInfo *ri,
>                                     bool isread)
>  {
>      /* Performance monitor registers user accessibility is controlled
> -     * by PMUSERENR.
> +     * by PMUSERENR. MDCR_EL2.TPM and MDCR_EL3.TPM allow configurable
> +     * trapping to EL2 or EL3 for other accesses.
>       */
> -    if (arm_current_el(env) == 0 && !env->cp15.c9_pmuserenr) {
> +    int el = arm_current_el(env);
> +
> +    if (el == 0 && !env->cp15.c9_pmuserenr) {
>          return CP_ACCESS_TRAP;
>      }
> +    if (el < 2 && (env->cp15.mdcr_el2 & MDCR_TPM)
> +        && !arm_is_secure_below_el3(env)) {
> +        return CP_ACCESS_TRAP_EL2;
> +    }
> +    if (el < 3 && (env->cp15.mdcr_el3 & MDCR_TPM)) {
> +        return CP_ACCESS_TRAP_EL3;

The same as above.

Best regards,
Sergey


> +    }
> +
>      return CP_ACCESS_OK;
>  }
>  
> @@ -1101,28 +1130,28 @@ static const ARMCPRegInfo v7_cp_reginfo[] = {
>        .access = PL0_RW, .type = ARM_CP_CONST, .resetvalue = 0,
>        .accessfn = pmreg_access },
>      { .name = "PMUSERENR", .cp = 15, .crn = 9, .crm = 14, .opc1 = 0, .opc2 = 
> 0,
> -      .access = PL0_R | PL1_RW,
> +      .access = PL0_R | PL1_RW, .accessfn = access_tpm,
>        .fieldoffset = offsetof(CPUARMState, cp15.c9_pmuserenr),
>        .resetvalue = 0,
>        .writefn = pmuserenr_write, .raw_writefn = raw_write },
>      { .name = "PMUSERENR_EL0", .state = ARM_CP_STATE_AA64,
>        .opc0 = 3, .opc1 = 3, .crn = 9, .crm = 14, .opc2 = 0,
> -      .access = PL0_R | PL1_RW, .type = ARM_CP_ALIAS,
> +      .access = PL0_R | PL1_RW, .accessfn = access_tpm, .type = ARM_CP_ALIAS,
>        .fieldoffset = offsetof(CPUARMState, cp15.c9_pmuserenr),
>        .resetvalue = 0,
>        .writefn = pmuserenr_write, .raw_writefn = raw_write },
>      { .name = "PMINTENSET", .cp = 15, .crn = 9, .crm = 14, .opc1 = 0, .opc2 
> = 1,
> -      .access = PL1_RW,
> +      .access = PL1_RW, .accessfn = access_tpm,
>        .fieldoffset = offsetof(CPUARMState, cp15.c9_pminten),
>        .resetvalue = 0,
>        .writefn = pmintenset_write, .raw_writefn = raw_write },
>      { .name = "PMINTENCLR", .cp = 15, .crn = 9, .crm = 14, .opc1 = 0, .opc2 
> = 2,
> -      .access = PL1_RW, .type = ARM_CP_ALIAS,
> +      .access = PL1_RW, .accessfn = access_tpm, .type = ARM_CP_ALIAS,
>        .fieldoffset = offsetof(CPUARMState, cp15.c9_pminten),
>        .writefn = pmintenclr_write, },
>      { .name = "PMINTENCLR_EL1", .state = ARM_CP_STATE_AA64,
>        .opc0 = 3, .opc1 = 0, .crn = 9, .crm = 14, .opc2 = 2,
> -      .access = PL1_RW, .type = ARM_CP_ALIAS,
> +      .access = PL1_RW, .accessfn = access_tpm, .type = ARM_CP_ALIAS,
>        .fieldoffset = offsetof(CPUARMState, cp15.c9_pminten),
>        .writefn = pmintenclr_write },
>      { .name = "VBAR", .state = ARM_CP_STATE_BOTH,




reply via email to

[Prev in Thread] Current Thread [Next in Thread]