[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Qemu-arm] [PATCH 0/2] Add ASPEED SCU device

From: Andrew Jeffery
Subject: [Qemu-arm] [PATCH 0/2] Add ASPEED SCU device
Date: Thu, 16 Jun 2016 17:48:05 +1000

Hi all,

These are two patches implementing minimal functionality for the ASPEED System
Control Unit device and integrating it into the AST2400 SoC model. The device is
critical for initialisation of u-boot and the kernel as it provides chip level
control registers, influencing the configuration of the software and the
software's configuration of the SoC.



Andrew Jeffery (2):
  hw/misc: Add a model for the ASPEED System Control Unit
  ast2400: Integrate the SCU model and configure reset values

 hw/arm/ast2400.c             |  57 +++++++++++++++++
 hw/misc/Makefile.objs        |   1 +
 hw/misc/aspeed_scu.c         | 147 +++++++++++++++++++++++++++++++++++++++++++
 include/hw/arm/ast2400.h     |   2 +
 include/hw/misc/aspeed_scu.h | 108 +++++++++++++++++++++++++++++++
 trace-events                 |   3 +
 6 files changed, 318 insertions(+)
 create mode 100644 hw/misc/aspeed_scu.c
 create mode 100644 include/hw/misc/aspeed_scu.h


reply via email to

[Prev in Thread] Current Thread [Next in Thread]