[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Qemu-arm] [PATCH v4 0/8] Add support for the Epson RX8900 RTC to the as

From: Alastair D'Silva
Subject: [Qemu-arm] [PATCH v4 0/8] Add support for the Epson RX8900 RTC to the aspeed board
Date: Thu, 15 Dec 2016 16:48:04 +1100

From: Alastair D'Silva <address@hidden>

This patch series adds support for the Epson RX8900 RTC to the
Aspeed board.

The tests use the existing imx25 infrastructure, and some minor
changes have been made to uniquely identify the I2C buses.

Support for named interrupts has been implemented in qtest to
facilitate testing.

 - Split overloaded patches
 - Fix spelling of Celsius
 - Remove degrees sign from messages
 - Don't force float precision
 - Reformat named interrupt qtest protocol for consistency
 - Minor formatting changes
 - Don't connect the RX8900 INT line to NVIC:22, it should be
   connected to GPIOJ10 on the ASPEED SOC
 - Add range checks for time components
 - Shorten trace messages
 - Use qemu generated i2c bus names
 - Address style comments from Alexey for rx8900 driver
 - Fix long lines in qtest harness
 - Remove trailing whitespace in hw/arm/pxa
 - Remove stray headers from rx8900 driver
 - Support low voltage detection in rx8900 driver
 - Avoid using error_report
 - Fix TIE behaviour
 - Move temperature init out of reset, it should not change
   on a soft reset
 - Fix IRQ in test failures
 - Add a NULL check for i2c slave init callbacks, so that we
   no longer need to implement empty init functions.
 - Refactor to use the existing qemu trace infrastructure
 - Move the RX8900 definition into the aspeed machine init
 - It it possible for check_update_interrupt_seconds in the
   rx8900 test to return 6, depending on the alignment with
   the wall clock.
 - Support low voltage detection

Alastair D'Silva (8):
  arm: Uniquely name imx25 I2C buses.
  qtest: Support named interrupts
  qtest: Support setting named GPIOs
  qtest: Fix whitespace
  hw/i2c: Tidy up NULL check for i2c slave init callbacks
  hw/timer: Add Epson RX8900 RTC support
  tests: Test all implemented RX8900 functionality
  arm: Add an RX8900 RTC to the ASpeed board

 default-configs/arm-softmmu.mak |   1 +
 hw/arm/aspeed.c                 |  29 ++
 hw/arm/imx25_pdk.c              |   2 +-
 hw/core/irq.c                   |  18 +-
 hw/i2c/core.c                   |   4 +-
 hw/i2c/imx_i2c.c                |   2 +-
 hw/timer/Makefile.objs          |   2 +
 hw/timer/rx8900.c               | 912 ++++++++++++++++++++++++++++++++++++++++
 hw/timer/rx8900_regs.h          | 141 +++++++
 hw/timer/trace-events           |  31 ++
 include/hw/irq.h                |  13 +-
 qtest.c                         | 103 +++--
 tests/Makefile.include          |   2 +
 tests/libqtest.c                |  85 +++-
 tests/libqtest.h                |  59 +++
 tests/rx8900-test.c             | 882 ++++++++++++++++++++++++++++++++++++++
 16 files changed, 2243 insertions(+), 43 deletions(-)
 create mode 100644 hw/timer/rx8900.c
 create mode 100644 hw/timer/rx8900_regs.h
 create mode 100644 tests/rx8900-test.c


reply via email to

[Prev in Thread] Current Thread [Next in Thread]