|
| From: | sundeep subbaraya |
| Subject: | Re: [Qemu-arm] [Qemu devel v5 PATCH 4/5] msf2: Add Smartfusion2 SoC. |
| Date: | Tue, 6 Jun 2017 13:03:57 +0530 |
Aw, cool. That is fine with me. Just add a comment saying that,On Sun, May 28, 2017 at 10:17 PM, sundeep subbaraya
<address@hidden> wrote:
> Hi Alistair,
>
> On Sat, May 27, 2017 at 5:18 AM, Alistair Francis <address@hidden>
> wrote:
>>
>> On Tue, May 16, 2017 at 8:38 AM, Subbaraya Sundeep
>> <address@hidden> wrote:
>> > Smartfusion2 SoC has hardened Microcontroller subsystem
>> > and flash based FPGA fabric. This patch adds support for
>> > Microcontroller subsystem in the SoC.
>> >
>> > Signed-off-by: Subbaraya Sundeep <address@hidden>
>> > ---
>> > default-configs/arm-softmmu.mak | 1 +
>> > hw/arm/Makefile.objs | 1 +
>> > hw/arm/msf2-soc.c | 201
>> > ++++++++++++++++++++++++++++++++++++++++
>> > include/hw/arm/msf2-soc.h | 69 ++++++++++++++
>> > 4 files changed, 272 insertions(+)
>> > create mode 100644 hw/arm/msf2-soc.c
>> > create mode 100644 include/hw/arm/msf2-soc.h
>> >
>> > diff --git a/default-configs/arm-softmmu.mak
>> > b/default-configs/arm-softmmu.mak
>> > index 78d7af0..7062512 100644
>> > --- a/default-configs/arm-softmmu.mak
>> > +++ b/default-configs/arm-softmmu.mak
>> > @@ -122,3 +122,4 @@ CONFIG_ACPI=y
>> > CONFIG_SMBIOS=y
>> > CONFIG_ASPEED_SOC=y
>> > CONFIG_GPIO_KEY=y
>> > +CONFIG_MSF2=y
>> > diff --git a/hw/arm/Makefile.objs b/hw/arm/Makefile.objs
>> > index 4c5c4ee..c828061 100644
>> > --- a/hw/arm/Makefile.objs
>> > +++ b/hw/arm/Makefile.objs
>> > @@ -18,3 +18,4 @@ obj-$(CONFIG_FSL_IMX25) += fsl-imx25.o imx25_pdk.o
>> > obj-$(CONFIG_FSL_IMX31) += fsl-imx31.o kzm.o
>> > obj-$(CONFIG_FSL_IMX6) += fsl-imx6.o sabrelite.o
>> > obj-$(CONFIG_ASPEED_SOC) += aspeed_soc.o aspeed.o
>> > +obj-$(CONFIG_MSF2) += msf2-soc.o
>> > diff --git a/hw/arm/msf2-soc.c b/hw/arm/msf2-soc.c
>> > new file mode 100644
>> > index 0000000..329e30c
>> > --- /dev/null
>> > +++ b/hw/arm/msf2-soc.c
>> > @@ -0,0 +1,201 @@
>> > +/*
>> > + * SmartFusion2 SoC emulation.
>> > + *
>> > + * Copyright (c) 2017 Subbaraya Sundeep <address@hidden>
>> > + *
>> > + * Permission is hereby granted, free of charge, to any person
>> > obtaining a copy
>> > + * of this software and associated documentation files (the
>> > "Software"), to deal
>> > + * in the Software without restriction, including without limitation
>> > the rights
>> > + * to use, copy, modify, merge, publish, distribute, sublicense, and/or
>> > sell
>> > + * copies of the Software, and to permit persons to whom the Software
>> > is
>> > + * furnished to do so, subject to the following conditions:
>> > + *
>> > + * The above copyright notice and this permission notice shall be
>> > included in
>> > + * all copies or substantial portions of the Software.
>> > + *
>> > + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
>> > EXPRESS OR
>> > + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
>> > MERCHANTABILITY,
>> > + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT
>> > SHALL
>> > + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR
>> > OTHER
>> > + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
>> > ARISING FROM,
>> > + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
>> > DEALINGS IN
>> > + * THE SOFTWARE.
>> > + */
>> > +
>> > +#include "qemu/osdep.h"
>> > +#include "qapi/error.h"
>> > +#include "qemu-common.h"
>> > +#include "hw/arm/arm.h"
>> > +#include "exec/address-spaces.h"
>> > +#include "hw/char/serial.h"
>> > +#include "hw/boards.h"
>> > +#include "sysemu/block-backend.h"
>> > +#include "hw/arm/msf2-soc.h"
>> > +
>> > +#define MSF2_TIMER_BASE 0x40004000
>> > +#define MSF2_SYSREG_BASE 0x40038000
>> > +
>> > +#define MSF2_TIMER_IRQ0 14
>> > +#define MSF2_TIMER_IRQ1 15
>> > +
>> > +static const uint32_t spi_addr[MSF2_NUM_SPIS] = { 0x40001000 ,
>> > 0x40011000 };
>> > +static const uint32_t uart_addr[MSF2_NUM_UARTS] = { 0x40000000 ,
>> > 0x40010000 };
>> > +
>> > +static const int spi_irq[MSF2_NUM_SPIS] = { 2, 3 };
>> > +static const int uart_irq[MSF2_NUM_UARTS] = { 10, 11 };
>> > +
>> > +static void m2sxxx_soc_initfn(Object *obj)
>> > +{
>> > + MSF2State *s = MSF2_SOC(obj);
>> > + int i;
>> > +
>> > + object_initialize(&s->armv7m, sizeof(s->armv7m), TYPE_ARMV7M);
>> > + qdev_set_parent_bus(DEVICE(&s->armv7m), sysbus_get_default());
>> > +
>> > + object_initialize(&s->sysreg, sizeof(s->sysreg), TYPE_MSF2_SYSREG);
>> > + qdev_set_parent_bus(DEVICE(&s->sysreg), sysbus_get_default());
>> > +
>> > + object_initialize(&s->timer, sizeof(s->timer), TYPE_MSS_TIMER);
>> > + qdev_set_parent_bus(DEVICE(&s->timer), sysbus_get_default());
>> > +
>> > + for (i = 0; i < MSF2_NUM_SPIS; i++) {
>> > + object_initialize(&s->spi[i], sizeof(s->spi[i]),
>> > + TYPE_MSS_SPI);
>> > + qdev_set_parent_bus(DEVICE(&s->spi[i]), sysbus_get_default());
>> > + }
>> > +}
>> > +
>> > +static void m2sxxx_soc_realize(DeviceState *dev_soc, Error **errp)
>> > +{
>> > + MSF2State *s = MSF2_SOC(dev_soc);
>> > + DeviceState *dev, *armv7m;
>> > + SysBusDevice *busdev;
>> > + Error *err = NULL;
>> > + int i;
>> > +
>> > + MemoryRegion *system_memory = get_system_memory();
>> > + MemoryRegion *nvm = g_new(MemoryRegion, 1);
>> > + MemoryRegion *nvm_alias = g_new(MemoryRegion, 1);
>> > + MemoryRegion *sram = g_new(MemoryRegion, 1);
>> > +
>> > + memory_region_init_ram(nvm, NULL, "MSF2.eNVM", s->envm_size,
>> > + &error_fatal);
>> > +
>> > + /*
>> > + * On power-on, the eNVM region 0x60000000 is automatically
>> > + * remapped to the Cortex-M3 processor executable region
>> > + * start address (0x0). We do not support remapping other eNVM,
>> > + * eSRAM and DDR regions by guest(via Sysreg) currently.
>> > + */
>> > + memory_region_init_alias(nvm_alias, NULL, "MSF2.eNVM.alias",
>> > + nvm, 0, s->envm_size);
>> > + vmstate_register_ram_global(nvm);
>> > +
>> > + memory_region_set_readonly(nvm, true);
>> > + memory_region_set_readonly(nvm_alias, true);
>> > +
>> > + memory_region_add_subregion(system_memory, ENVM_BASE_ADDRESS, nvm);
>> > + memory_region_add_subregion(system_memory, 0, nvm_alias);
>> > +
>> > + memory_region_init_ram(sram, NULL, "MSF2.eSRAM", s->esram_size,
>> > + &error_fatal);
>> > + vmstate_register_ram_global(sram);
>> > + memory_region_add_subregion(system_memory, SRAM_BASE_ADDRESS,
>> > sram);
>> > +
>> > + armv7m = DEVICE(&s->armv7m);
>> > + qdev_prop_set_uint32(armv7m, "num-irq", 81);
>> > + qdev_prop_set_string(armv7m, "cpu-model", "cortex-m3");
>> > + object_property_set_link(OBJECT(&s->armv7m),
>> > OBJECT(get_system_memory()),
>> > + "memory", &error_abort);
>> > + object_property_set_bool(OBJECT(&s->armv7m), true, "realized",
>> > &err);
>> > + if (err != NULL) {
>> > + error_propagate(errp, err);
>> > + return;
>> > + }
>> > +
>> > + for (i = 0; i < MSF2_NUM_UARTS; i++) {
>> > + if (serial_hds[i]) {
>> > + serial_mm_init(get_system_memory(), uart_addr[i], 2,
>> > + qdev_get_gpio_in(armv7m, uart_irq[i]),
>> > + 115200, serial_hds[i],
>> > DEVICE_NATIVE_ENDIAN);
>> > + }
>> > + }
>> > +
>> > + dev = DEVICE(&s->timer);
>> > + /* pclk0 is the timer input clock */
>> > + qdev_prop_set_uint32(dev, "clock-frequency", s->pclk0);
>> > + object_property_set_bool(OBJECT(&s->timer), true, "realized",
>> > &err);
>> > + if (err != NULL) {
>> > + error_propagate(errp, err);
>> > + return;
>> > + }
>> > + busdev = SYS_BUS_DEVICE(dev);
>> > + sysbus_mmio_map(busdev, 0, MSF2_TIMER_BASE);
>> > + sysbus_connect_irq(busdev, 0,
>> > + qdev_get_gpio_in(armv7m, MSF2_TIMER_IRQ0));
>> > + sysbus_connect_irq(busdev, 1,
>> > + qdev_get_gpio_in(armv7m, MSF2_TIMER_IRQ1));
>> > +
>> > + dev = DEVICE(&s->sysreg);
>> > + object_property_set_bool(OBJECT(&s->sysreg), true, "realized",
>> > &err);
>> > + if (err != NULL) {
>> > + error_propagate(errp, err);
>> > + return;
>> > + }
>> > + busdev = SYS_BUS_DEVICE(dev);
>> > + sysbus_mmio_map(busdev, 0, MSF2_SYSREG_BASE);
>> > +
>> > + for (i = 0; i < MSF2_NUM_SPIS; i++) {
>> > + gchar *bus_name = g_strdup_printf("spi%d", i);
>> > +
>> > + object_property_set_bool(OBJECT(&s->spi[i]), true, "realized",
>> > &err);
>> > + if (err != NULL) {
>> > + g_free(bus_name);
>> > + error_propagate(errp, err);
>> > + return;
>> > + }
>> > +
>> > + sysbus_mmio_map(SYS_BUS_DEVICE(&s->spi[i]), 0, spi_addr[i]);
>> > + sysbus_connect_irq(SYS_BUS_DEVICE(&s->spi[i]), 0,
>> > + qdev_get_gpio_in(armv7m, spi_irq[i]));
>> > +
>> > + /* Alias controller SPI bus to the SoC itself */
>> > + object_property_add_alias(OBJECT(s), bus_name,
>> > + OBJECT(&s->spi[i]), "spi0",
>> > + &error_abort);
>> > + g_free(bus_name);
>> > + }
>> > +}
>> > +
>> > +static Property m2sxxx_soc_properties[] = {
>> > + DEFINE_PROP_STRING("part-name", MSF2State, part_name),
>>
>> This is never used, why have it here?
>
> Just for information purpose as there are many variants. I thought it would
> be good to
> show this in qtree to user.
otherwise it is confusing why it isn't used.
>>
>>
>> > + DEFINE_PROP_UINT64("eNVM-size", MSF2State, envm_size, I think that is best, if you end up using it in the future you can add
>> > MSF2_ENVM_SIZE),
>> > + DEFINE_PROP_UINT64("eSRAM-size", MSF2State, esram_size,
>> > MSF2_ESRAM_SIZE),
>> > + /* Libero GUI shows 100Mhz as default for clocks */
>> > + DEFINE_PROP_UINT32("pclk0", MSF2State, pclk0, 100 * 1000000),
>> > + DEFINE_PROP_UINT32("pclk1", MSF2State, pclk1, 100 * 1000000),
>>
>> Same with this one.
>
> Yeah currently not used maybe it will be useful in future. I will remove it
> for now.
it back in.
Thanks,
Alistair
>
> Thanks,
> Sundeep
>>
>>
>> Thanks,
>> Alistair
>>
>> > + DEFINE_PROP_END_OF_LIST(),
>> > +};
>> > +
>> > +static void m2sxxx_soc_class_init(ObjectClass *klass, void *data)
>> > +{
>> > + DeviceClass *dc = DEVICE_CLASS(klass);
>> > +
>> > + dc->realize = m2sxxx_soc_realize;
>> > + dc->props = m2sxxx_soc_properties;
>> > +}
>> > +
>> > +static const TypeInfo m2sxxx_soc_info = {
>> > + .name = TYPE_MSF2_SOC,
>> > + .parent = TYPE_SYS_BUS_DEVICE,
>> > + .instance_size = sizeof(MSF2State),
>> > + .instance_init = m2sxxx_soc_initfn,
>> > + .class_init = m2sxxx_soc_class_init,
>> > +};
>> > +
>> > +static void m2sxxx_soc_types(void)
>> > +{
>> > + type_register_static(&m2sxxx_soc_info);
>> > +}
>> > +
>> > +type_init(m2sxxx_soc_types)
>> > diff --git a/include/hw/arm/msf2-soc.h b/include/hw/arm/msf2-soc.h
>> > new file mode 100644
>> > index 0000000..67adddb
>> > --- /dev/null
>> > +++ b/include/hw/arm/msf2-soc.h
>> > @@ -0,0 +1,69 @@
>> > +/*
>> > + * Microsemi Smartfusion2 SoC
>> > + *
>> > + * Copyright (c) 2017 Subbaraya Sundeep <address@hidden>
>> > + *
>> > + * Permission is hereby granted, free of charge, to any person
>> > obtaining a copy
>> > + * of this software and associated documentation files (the
>> > "Software"), to deal
>> > + * in the Software without restriction, including without limitation
>> > the rights
>> > + * to use, copy, modify, merge, publish, distribute, sublicense, and/or
>> > sell
>> > + * copies of the Software, and to permit persons to whom the Software
>> > is
>> > + * furnished to do so, subject to the following conditions:
>> > + *
>> > + * The above copyright notice and this permission notice shall be
>> > included in
>> > + * all copies or substantial portions of the Software.
>> > + *
>> > + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
>> > EXPRESS OR
>> > + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
>> > MERCHANTABILITY,
>> > + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT
>> > SHALL
>> > + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR
>> > OTHER
>> > + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
>> > ARISING FROM,
>> > + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
>> > DEALINGS IN
>> > + * THE SOFTWARE.
>> > + */
>> > +
>> > +#ifndef HW_ARM_MSF2_SOC_H
>> > +#define HW_ARM_MSF2_SOC_H
>> > +
>> > +#include "hw/misc/msf2-sysreg.h"
>> > +#include "hw/timer/mss-timer.h"
>> > +#include "hw/ssi/mss-spi.h"
>> > +#include "hw/arm/armv7m.h"
>> > +#include "qemu/cutils.h"
>> > +
>> > +#define TYPE_MSF2_SOC "msf2-soc"
>> > +#define MSF2_SOC(obj) OBJECT_CHECK(MSF2State, (obj), TYPE_MSF2_SOC)
>> > +
>> > +#define MSF2_NUM_SPIS 2
>> > +#define MSF2_NUM_UARTS 2
>> > +
>> > +#define ENVM_BASE_ADDRESS 0x60000000
>> > +
>> > +#define SRAM_BASE_ADDRESS 0x20000000
>> > +
>> > +#define MSF2_ENVM_SIZE (512 * K_BYTE)
>> > +#define MSF2_ESRAM_SIZE (64 * K_BYTE)
>> > +
>> > +#define M2S010_ENVM_SIZE (256 * K_BYTE)
>> > +#define M2S010_ESRAM_SIZE (64 * K_BYTE)
>> > +
>> > +typedef struct MSF2State {
>> > + /*< private >*/
>> > + SysBusDevice parent_obj;
>> > + /*< public >*/
>> > +
>> > + ARMv7MState armv7m;
>> > +
>> > + char *part_name;
>> > + uint64_t envm_size;
>> > + uint64_t esram_size;
>> > +
>> > + uint32_t pclk0;
>> > + uint32_t pclk1;
>> > +
>> > + MSF2SysregState sysreg;
>> > + MSSTimerState timer;
>> > + MSSSpiState spi[MSF2_NUM_SPIS];
>> > +} MSF2State;
>> > +
>> > +#endif
>> > --
>> > 2.5.0
>> >
>
>
| [Prev in Thread] | Current Thread | [Next in Thread] |