[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Qemu-arm] [PATCH v14 7/9] ARM: ACPI: Add GPIO notification type for
From: |
Igor Mammedov |
Subject: |
Re: [Qemu-arm] [PATCH v14 7/9] ARM: ACPI: Add GPIO notification type for hardware RAS error |
Date: |
Wed, 3 Jan 2018 14:36:18 +0100 |
On Wed, 3 Jan 2018 11:48:30 +0800
gengdongjiu <address@hidden> wrote:
> On 2017/12/28 22:53, Igor Mammedov wrote:
> > On Thu, 28 Dec 2017 13:54:16 +0800
> > Dongjiu Geng <address@hidden> wrote:
[...]
> >> +static void acpi_dsdt_add_error_device(Aml *scope)
> >> +{
> >> + Aml *dev = aml_device(ACPI_HARDWARE_ERROR_DEVICE);
> >> + Aml *method;
> >> +
> >> + aml_append(dev, aml_name_decl("_HID", aml_eisaid("PNP0C33")));
> >> + aml_append(dev, aml_name_decl("_UID", aml_int(0)));
> >> +
> >> + method = aml_method("_STA", 0, AML_NOTSERIALIZED);
> >> + aml_append(method, aml_return(aml_int(0x0f)));
> > no need for dummy _STA method, device is assumed to be present if there is
> > no _STA
> Igor,
> do you mean remove above two line code as shown in [1]?
> I dump the DSDT table in my host Ubuntu PC for the error device (PNP0C33), it
> has the _STA, as shown in [2].
> do we not want to add the _STA for guest?
>
> [1]
> + method = aml_method("_STA", 0, AML_NOTSERIALIZED);
> + aml_append(method, aml_return(aml_int(0x0f)));
compared to host, yours method does nothing,
read ACPI6.2 "6.3.7 _STA (Status)" one more time
> [2]:
> Device (WERR)
> {
> Name (_HID, EisaId ("PNP0C33")) // _HID: Hardware ID
> Method (_STA, 0, NotSerialized) // _STA: Status
> {
> If (LGreaterEqual (OSYS, 0x07D9))
> {
> Return (0x0F)
> }
> Else
> {
> Return (Zero)
> }
> }
> }
> >
> >> + aml_append(dev, method);
> >> + aml_append(scope, dev);
> >> +}
> >> +
[...]