[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Qemu-arm] [PATCH v9 12/14] hw/arm/virt: Add SMMUv3 to the virt boar
From: |
Peter Maydell |
Subject: |
Re: [Qemu-arm] [PATCH v9 12/14] hw/arm/virt: Add SMMUv3 to the virt board |
Date: |
Mon, 12 Mar 2018 12:46:28 +0000 |
On 17 February 2018 at 18:46, Eric Auger <address@hidden> wrote:
> From: Prem Mallappa <address@hidden>
>
> Add code to instantiate an smmuv3 in virt machine. A new iommu
> integer member is introduced in VirtMachineState to store the type
> of the iommu in use.
>
> Signed-off-by: Prem Mallappa <address@hidden>
> Signed-off-by: Eric Auger <address@hidden>
>
> ---
> v7 -> v8:
> - integer iommu member
> - add primary-bus property
>
> v4 -> v5:
> - add dma-coherent property
>
> v2 -> v3:
> - vbi was removed. Use vms instead
> - migrate to new smmu binding format (iommu-map)
> - don't use appendprop anymore
> - add vms->smmu and guard instantiation with this latter
> - interrupts type changed to edge
>
> Conflicts:
> hw/arm/smmuv3.c
> ---
> hw/arm/virt.c | 64
> ++++++++++++++++++++++++++++++++++++++++++++++++++-
> include/hw/arm/virt.h | 10 ++++++++
> 2 files changed, 73 insertions(+), 1 deletion(-)
>
> diff --git a/hw/arm/virt.c b/hw/arm/virt.c
> index dbb3c80..e9dca0d 100644
> --- a/hw/arm/virt.c
> +++ b/hw/arm/virt.c
> @@ -58,6 +58,7 @@
> #include "hw/smbios/smbios.h"
> #include "qapi/visitor.h"
> #include "standard-headers/linux/input.h"
> +#include "hw/arm/smmuv3.h"
>
> #define DEFINE_VIRT_MACHINE_LATEST(major, minor, latest) \
> static void virt_##major##_##minor##_class_init(ObjectClass *oc, \
> @@ -141,6 +142,7 @@ static const MemMapEntry a15memmap[] = {
> [VIRT_FW_CFG] = { 0x09020000, 0x00000018 },
> [VIRT_GPIO] = { 0x09030000, 0x00001000 },
> [VIRT_SECURE_UART] = { 0x09040000, 0x00001000 },
> + [VIRT_SMMU] = { 0x09050000, 0x00020000 }, /* 128K, needed
> */
What does the "needed" comment mean here?
> [VIRT_MMIO] = { 0x0a000000, 0x00000200 },
> /* ...repeating for a total of NUM_VIRTIO_TRANSPORTS, each of that size
> */
> [VIRT_PLATFORM_BUS] = { 0x0c000000, 0x02000000 },
> @@ -161,6 +163,7 @@ static const int a15irqmap[] = {
> [VIRT_SECURE_UART] = 8,
> [VIRT_MMIO] = 16, /* ...to 16 + NUM_VIRTIO_TRANSPORTS - 1 */
> [VIRT_GIC_V2M] = 48, /* ...to 48 + NUM_GICV2M_SPIS - 1 */
> + [VIRT_SMMU] = 74, /* ...to 74 + NUM_SMMU_IRQS - 1 */
> [VIRT_PLATFORM_BUS] = 112, /* ...to 112 + PLATFORM_BUS_NUM_IRQS -1 */
> };
>
> @@ -941,7 +944,57 @@ static void create_pcie_irq_map(const VirtMachineState
> *vms,
> 0x7 /* PCI irq */);
> }
>
> -static void create_pcie(const VirtMachineState *vms, qemu_irq *pic)
> +static void create_smmu(const VirtMachineState *vms, qemu_irq *pic,
> + PCIBus *bus)
Side suggestion: if you add "algorithm = histogram" to the [diff] section
of your .gitconfig, you will probably find that it doesn't generate patches
with this sort of silly patch hunk any more. I only discovered this
config setting recently but I think it's better than the default.
> +{
> + char *node;
> + const char compat[] = "arm,smmu-v3";
> + int irq = vms->irqmap[VIRT_SMMU];
> + int i;
> + hwaddr base = vms->memmap[VIRT_SMMU].base;
> + hwaddr size = vms->memmap[VIRT_SMMU].size;
> + const char irq_names[] = "eventq\0priq\0cmdq-sync\0gerror";
> + DeviceState *dev;
> +
> + if (vms->iommu != VIRT_IOMMU_SMMUV3 || !vms->iommu_phandle) {
> + return;
> + }
> +
> + dev = qdev_create(NULL, "arm-smmuv3");
> +
> + object_property_set_link(OBJECT(dev), OBJECT(bus), "primary-bus",
> + &error_abort);
> + qdev_init_nofail(dev);
> + sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, base);
> + for (i = 0; i < NUM_SMMU_IRQS; i++) {
> + sysbus_connect_irq(SYS_BUS_DEVICE(dev), i, pic[irq + i]);
> + }
> +
> + node = g_strdup_printf("/address@hidden" PRIx64, base);
> + qemu_fdt_add_subnode(vms->fdt, node);
> + qemu_fdt_setprop(vms->fdt, node, "compatible", compat, sizeof(compat));
> + qemu_fdt_setprop_sized_cells(vms->fdt, node, "reg", 2, base, 2, size);
> +
> + qemu_fdt_setprop_cells(vms->fdt, node, "interrupts",
> + GIC_FDT_IRQ_TYPE_SPI, irq , GIC_FDT_IRQ_FLAGS_EDGE_LO_HI,
> + GIC_FDT_IRQ_TYPE_SPI, irq + 1, GIC_FDT_IRQ_FLAGS_EDGE_LO_HI,
> + GIC_FDT_IRQ_TYPE_SPI, irq + 2, GIC_FDT_IRQ_FLAGS_EDGE_LO_HI,
> + GIC_FDT_IRQ_TYPE_SPI, irq + 3, GIC_FDT_IRQ_FLAGS_EDGE_LO_HI);
> +
> + qemu_fdt_setprop(vms->fdt, node, "interrupt-names", irq_names,
> + sizeof(irq_names));
> +
> + qemu_fdt_setprop_cell(vms->fdt, node, "clocks", vms->clock_phandle);
> + qemu_fdt_setprop_string(vms->fdt, node, "clock-names", "apb_pclk");
> + qemu_fdt_setprop(vms->fdt, node, "dma-coherent", NULL, 0);
Is this definitely the right setting for dma-coherent? My (possibly
naive) thought is that for an emulated SMMU our page-table walks are
going to be coherent with the CPU's view.
> +
> + qemu_fdt_setprop_cell(vms->fdt, node, "#iommu-cells", 1);
> +
> + qemu_fdt_setprop_cell(vms->fdt, node, "phandle", vms->iommu_phandle);
> + g_free(node);
> +}
> +enum {
> + VIRT_IOMMU_NONE,
> + VIRT_IOMMU_SMMUV3,
> + VIRT_IOMMU_VIRTIO,
> +};
> +
> typedef struct MemMapEntry {
> hwaddr base;
> hwaddr size;
> @@ -96,6 +104,7 @@ typedef struct {
> bool its;
> bool virt;
> int32_t gic_version;
> + int32_t iommu;
This is always one of the VIRT_IOMMU_* values, right?
I think we should give that enum a typedef name and then
use the type here.
> struct arm_boot_info bootinfo;
> const MemMapEntry *memmap;
> const int *irqmap;
> @@ -105,6 +114,7 @@ typedef struct {
> uint32_t clock_phandle;
> uint32_t gic_phandle;
> uint32_t msi_phandle;
> + uint32_t iommu_phandle;
> int psci_conduit;
> } VirtMachineState;
>
Otherwise
Reviewed-by: Peter Maydell <address@hidden>
thanks
-- PMM
- Re: [Qemu-arm] [PATCH v9 12/14] hw/arm/virt: Add SMMUv3 to the virt board,
Peter Maydell <=