[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Qemu-arm] [PATCH 20/27] hw/misc/tz-mpc.c: Implement correct blocked
From: |
Alex Bennée |
Subject: |
Re: [Qemu-arm] [PATCH 20/27] hw/misc/tz-mpc.c: Implement correct blocked-access behaviour |
Date: |
Wed, 23 May 2018 11:49:43 +0100 |
User-agent: |
mu4e 1.1.0; emacs 26.1 |
Peter Maydell <address@hidden> writes:
> The MPC is guest-configurable for whether blocked accesses:
> * should be RAZ/WI or cause a bus error
> * should generate an interrupt or not
>
> Implement this behaviour in the blocked-access handlers.
>
> Signed-off-by: Peter Maydell <address@hidden>
> ---
> hw/misc/tz-mpc.c | 50 ++++++++++++++++++++++++++++++++++++++++++++++--
> 1 file changed, 48 insertions(+), 2 deletions(-)
>
> diff --git a/hw/misc/tz-mpc.c b/hw/misc/tz-mpc.c
> index 93453cbef2..39a72563b7 100644
> --- a/hw/misc/tz-mpc.c
> +++ b/hw/misc/tz-mpc.c
> @@ -43,6 +43,9 @@ REG32(INT_EN, 0x28)
> FIELD(INT_EN, IRQ, 0, 1)
> REG32(INT_INFO1, 0x2c)
> REG32(INT_INFO2, 0x30)
> + FIELD(INT_INFO2, HMASTER, 0, 16)
> + FIELD(INT_INFO2, HNONSEC, 16, 1)
> + FIELD(INT_INFO2, CFG_NS, 17, 1)
> REG32(INT_SET, 0x34)
> FIELD(INT_SET, IRQ, 0, 1)
> REG32(PIDR4, 0xfd0)
> @@ -266,6 +269,45 @@ static const MemoryRegionOps tz_mpc_reg_ops = {
> .impl.max_access_size = 4,
> };
>
> +static inline bool tz_mpc_cfg_ns(TZMPC *s, hwaddr addr)
> +{
> + /* Return the cfg_ns bit from the LUT for the specified address */
> + hwaddr blknum = addr / s->blocksize;
> + hwaddr blkword = blknum / 32;
> + uint32_t blkbit = 1U << (blknum % 32);
> +
> + /* This would imply the address was larger than the size we
> + * defined this memory region to be, so it can't happen.
> + */
> + assert(blkword < s->blk_max);
> + return s->blk_lut[blkword] & blkbit;
> +}
> +
> +static MemTxResult tz_mpc_handle_block(TZMPC *s, hwaddr addr, MemTxAttrs
> attrs)
> +{
> + /* Handle a blocked transaction: raise IRQ, capture info, etc */
> + if (!s->int_stat) {
> + /* First blocked transfer: capture information into INT_INFO1 and
> + * INT_INFO2. Subsequent transfers are still blocked but don't
> + * capture information until the guest clears the interrupt.
> + */
> +
> + s->int_info1 = addr;
> + s->int_info2 = 0;
> + s->int_info2 = FIELD_DP32(s->int_info2, INT_INFO2, HMASTER,
> + attrs.requester_id & 0xffff);
Does this actually need masking given the source is a 16 bit wide bitfield?
> + s->int_info2 = FIELD_DP32(s->int_info2, INT_INFO2, HNONSEC,
> + ~attrs.secure);
> + s->int_info2 = FIELD_DP32(s->int_info2, INT_INFO2, CFG_NS,
> + tz_mpc_cfg_ns(s, addr));
> + s->int_stat |= R_INT_STAT_IRQ_MASK;
> + tz_mpc_irq_update(s);
> + }
> +
> + /* Generate bus error if desired; otherwise RAZ/WI */
> + return (s->ctrl & R_CTRL_SEC_RESP_MASK) ? MEMTX_ERROR : MEMTX_OK;
> +}
> +
> /* Accesses only reach these read and write functions if the MPC is
> * blocking them; non-blocked accesses go directly to the downstream
> * memory region without passing through this code.
> @@ -274,19 +316,23 @@ static MemTxResult tz_mpc_mem_blocked_read(void
> *opaque, hwaddr addr,
> uint64_t *pdata,
> unsigned size, MemTxAttrs attrs)
> {
> + TZMPC *s = TZ_MPC(opaque);
> +
> trace_tz_mpc_mem_blocked_read(addr, size, attrs.secure);
>
> *pdata = 0;
> - return MEMTX_OK;
> + return tz_mpc_handle_block(s, addr, attrs);
> }
>
> static MemTxResult tz_mpc_mem_blocked_write(void *opaque, hwaddr addr,
> uint64_t value,
> unsigned size, MemTxAttrs attrs)
> {
> + TZMPC *s = TZ_MPC(opaque);
> +
> trace_tz_mpc_mem_blocked_write(addr, value, size, attrs.secure);
>
> - return MEMTX_OK;
> + return tz_mpc_handle_block(s, addr, attrs);
> }
>
> static const MemoryRegionOps tz_mpc_mem_blocked_ops = {
--
Alex Bennée
- [Qemu-arm] [PATCH 06/27] Make flatview_extend_translation() take a MemTxAttrs argument, (continued)
- [Qemu-arm] [PATCH 06/27] Make flatview_extend_translation() take a MemTxAttrs argument, Peter Maydell, 2018/05/21
- [Qemu-arm] [PATCH 12/27] Make flatview_do_translate() take a MemTxAttrs argument, Peter Maydell, 2018/05/21
- [Qemu-arm] [PATCH 10/27] Make flatview_translate() take a MemTxAttrs argument, Peter Maydell, 2018/05/21
- [Qemu-arm] [PATCH 20/27] hw/misc/tz-mpc.c: Implement correct blocked-access behaviour, Peter Maydell, 2018/05/21
- Re: [Qemu-arm] [PATCH 20/27] hw/misc/tz-mpc.c: Implement correct blocked-access behaviour,
Alex Bennée <=
- [Qemu-arm] [PATCH 03/27] Make address_space_translate{, _cached}() take a MemTxAttrs argument, Peter Maydell, 2018/05/21
- [Qemu-arm] [PATCH 15/27] iommu: Add IOMMU index argument to notifier APIs, Peter Maydell, 2018/05/21