SMC cmd 0x0 val 0x31 SMC cmd 0x0 val 0x31 SMC cmd 0x0 val 0x31 SMC cmd 0x0 val 0x31 [ 0.000000] Booting Linux on physical CPU 0xf00 [ 0.000000] Linux version 4.20.0-rc4-00149-gf92a2ebb3d55 (address@hidden) (gcc version 7.3.0 (GCC)) #1 SMP Thu Nov 29 17:18:19 PST 2018 [ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: Raspberry Pi 2 Model B [ 0.000000] earlycon: pl11 at MMIO 0x3f201000 (options '') [ 0.000000] printk: bootconsole [pl11] enabled [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] efi: Getting EFI parameters from FDT: [ 0.000000] efi: UEFI not found. [ 0.000000] cma: Reserved 64 MiB at 0x38000000 [ 0.000000] random: get_random_bytes called from start_kernel+0xa0/0x468 with crng_init=0 [ 0.000000] percpu: Embedded 17 pages/cpu @(ptrval) s40140 r8192 d21300 u69632 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 244224 [ 0.000000] Kernel command line: earlycon=pl011,0x3f201000 root=/dev/mmcblk0 rootwait rw console=ttyAMA0 noreboot [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 887180K/983040K available (12288K kernel code, 1612K rwdata, 4732K rodata, 2048K init, 396K bss, 30324K reserved, 65536K cma-reserved, 131072K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xf0800000 - 0xff800000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0x(ptrval) - 0x(ptrval) (13280 kB) [ 0.000000] .init : 0x(ptrval) - 0x(ptrval) (2048 kB) [ 0.000000] .data : 0x(ptrval) - 0x(ptrval) (1613 kB) [ 0.000000] .bss : 0x(ptrval) - 0x(ptrval) ( 397 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=4. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns [ 0.000000] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns [ 0.000000] bcm2835: system timer (irq = 27) [ 0.000000] arch_timer: cp15 timer(s) running at 62.50MHz (virt). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x1cd42e208c, max_idle_ns: 881590405314 ns [ 0.000029] sched_clock: 56 bits at 62MHz, resolution 16ns, wraps every 4398046511096ns [ 0.000494] Switching to timer-based delay loop, resolution 16ns [ 0.004456] Console: colour dummy device 80x30 [ 0.005906] Calibrating delay loop (skipped), value calculated using timer frequency.. 125.00 BogoMIPS (lpj=625000) [ 0.006475] pid_max: default: 32768 minimum: 301 [ 0.007812] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.008106] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.021948] CPU: Testing write buffer coherency: ok [ 0.032257] CPU0: update cpu_capacity 1024 [ 0.032506] CPU0: thread -1, cpu 0, socket 15, mpidr 80000f00 [ 0.037656] Setting up static identity map for 0x300000 - 0x3000a0 [ 0.040639] rcu: Hierarchical SRCU implementation. [ 0.047695] EFI services will not be available. [ 0.049243] smp: Bringing up secondary CPUs ... [ 0.052497] CPU1: update cpu_capacity 1024 [ 0.052532] CPU1: thread -1, cpu 1, socket 15, mpidr 80000f01 [ 0.056708] CPU2: update cpu_capacity 1024 [ 0.056728] CPU2: thread -1, cpu 2, socket 15, mpidr 80000f02 [ 0.058471] CPU3: update cpu_capacity 1024 [ 0.058486] CPU3: thread -1, cpu 3, socket 15, mpidr 80000f03 [ 0.058918] smp: Brought up 1 node, 4 CPUs [ 0.059509] SMP: Total of 4 processors activated (500.00 BogoMIPS). [ 0.059658] CPU: All CPU(s) started in SVC mode. [ 0.101819] devtmpfs: initialized [ 0.120285] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5 [ 0.132058] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.132860] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.140543] pinctrl core: initialized pinctrl subsystem [ 0.152733] DMI not present or invalid. [ 0.158677] NET: Registered protocol family 16 [ 0.177474] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.187133] cpuidle: using governor menu [ 0.188084] No ATAGs? [ 0.190514] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.190699] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.195972] Serial: AMBA PL011 UART driver [ 0.259895] AT91: Could not find identification node [ 0.270416] vgaarb: loaded [ 0.272704] SCSI subsystem initialized [ 0.275759] usbcore: registered new interface driver usbfs [ 0.276268] usbcore: registered new interface driver hub [ 0.276622] usbcore: registered new device driver usb [ 0.280134] pps_core: LinuxPPS API ver. 1 registered [ 0.280324] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.280802] PTP clock support registered [ 0.281816] EDAC MC: Ver: 3.0.0 [ 0.301689] clocksource: Switched to clocksource arch_sys_counter [ 0.447584] NET: Registered protocol family 2 [ 0.453363] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes) [ 0.453585] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.453893] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.454164] TCP: Hash tables configured (established 8192 bind 8192) [ 0.455644] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.455857] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.456844] NET: Registered protocol family 1 [ 0.460303] RPC: Registered named UNIX socket transport module. [ 0.460600] RPC: Registered udp transport module. [ 0.460723] RPC: Registered tcp transport module. [ 0.460792] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.469505] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 1 counters available [ 0.472898] Initialise system trusted keyrings [ 0.474593] workingset: timestamp_bits=30 max_order=18 bucket_order=0 [ 0.486333] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.488704] NFS: Registering the id_resolver key type [ 0.488970] Key type id_resolver registered [ 0.489059] Key type id_legacy registered [ 0.489445] ntfs: driver 2.1.32 [Flags: R/O]. [ 0.521793] Key type asymmetric registered [ 0.521963] Asymmetric key parser 'x509' registered [ 0.522241] bounce: pool size: 64 pages [ 0.522576] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) [ 0.522867] io scheduler noop registered [ 0.522975] io scheduler deadline registered [ 0.523411] io scheduler cfq registered (default) [ 0.523541] io scheduler mq-deadline registered [ 0.523630] io scheduler kyber registered [ 0.851239] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.860235] SuperH (H)SCI(F) driver initialized [ 0.862056] msm_serial: driver initialized [ 0.862422] STMicroelectronics ASC driver initialized [ 0.864107] STM32 USART driver initialized [ 0.867582] bcm2835-rng 3f104000.rng: hwrng registered [ 0.911308] brd: module loaded [ 0.930971] loop: module loaded [ 0.948186] libphy: Fixed MDIO Bus: probed [ 0.950236] CAN device driver interface [ 0.951796] bgmac_bcma: Broadcom 47xx GBit MAC driver loaded [ 0.953663] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 0.953744] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 0.953926] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k [ 0.954023] igb: Copyright (c) 2007-2014 Intel Corporation. [ 0.960700] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver [ 0.960897] usbcore: registered new interface driver pegasus [ 0.961076] usbcore: registered new interface driver asix [ 0.961218] usbcore: registered new interface driver ax88179_178a [ 0.961364] usbcore: registered new interface driver cdc_ether [ 0.961555] usbcore: registered new interface driver smsc75xx [ 0.961725] usbcore: registered new interface driver smsc95xx [ 0.961871] usbcore: registered new interface driver net1080 [ 0.962014] usbcore: registered new interface driver cdc_subset [ 0.962157] usbcore: registered new interface driver zaurus [ 0.962354] usbcore: registered new interface driver cdc_ncm [ 0.966251] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.966396] ehci-pci: EHCI PCI platform driver [ 0.966642] ehci-platform: EHCI generic platform driver [ 0.967040] ehci-orion: EHCI orion driver [ 0.967380] SPEAr-ehci: EHCI SPEAr driver [ 0.967701] ehci-st: EHCI STMicroelectronics driver [ 0.968031] ehci-exynos: EHCI EXYNOS driver [ 0.968375] ehci-atmel: EHCI Atmel driver [ 0.968698] tegra-ehci: Tegra EHCI driver [ 0.969046] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.969202] ohci-pci: OHCI PCI platform driver [ 0.969429] ohci-platform: OHCI generic platform driver [ 0.969808] SPEAr-ohci: OHCI SPEAr driver [ 0.970130] ohci-st: OHCI STMicroelectronics driver [ 0.970629] ohci-atmel: OHCI Atmel driver [ 0.972126] usbcore: registered new interface driver usb-storage [ 0.982521] i2c /dev entries driver [ 0.987617] i2c-bcm2835 3f805000.i2c: Could not read clock-frequency property [ 1.013664] bcm2835-wdt 3f100000.watchdog: Broadcom BCM2835 watchdog timer [ 1.020569] sdhci: Secure Digital Host Controller Interface driver [ 1.020660] sdhci: Copyright(c) Pierre Ossman [ 1.023916] Synopsys Designware Multimedia Card Interface Driver [ 1.129393] sdhost-bcm2835 3f202000.mmc: loaded - DMA enabled (>1) [ 1.130015] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.146440] ledtrig-cpu: registered to indicate activity on CPUs [ 1.148332] usbcore: registered new interface driver usbhid [ 1.148423] usbhid: USB HID core driver [ 1.150810] bcm2835-mbox 3f00b880.mailbox: mailbox enabled [ 1.157622] NET: Registered protocol family 10 [ 1.163802] Segment Routing with IPv6 [ 1.164255] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 1.166773] NET: Registered protocol family 17 [ 1.166936] can: controller area network core (rev 20170425 abi 9) [ 1.167339] NET: Registered protocol family 29 [ 1.167445] can: raw protocol (rev 20170425) [ 1.167578] can: broadcast manager protocol (rev 20170425 t) [ 1.167752] can: netlink gateway (rev 20170425) max_hops=1 [ 1.168711] Key type dns_resolver registered [ 1.169271] ThumbEE CPU extension supported. [ 1.169383] Registering SWP/SWPB emulation handler [ 1.172598] Loading compiled-in X.509 certificates [ 1.190016] 3f201000.serial: ttyAMA0 at MMIO 0x3f201000 (irq = 81, base_baud = 0) is a PL011 rev2 [ 1.191256] printk: console [ttyAMA0] enabled [ 1.191256] printk: console [ttyAMA0] enabled [ 1.191625] printk: bootconsole [pl11] disabled [ 1.191625] printk: bootconsole [pl11] disabled [ 1.205666] raspberrypi-firmware soc:firmware: Attached to firmware from 1970-01-05 00:12 [ 1.212553] dwc2 3f980000.usb: 3f980000.usb supply vusb_d not found, using dummy regulator [ 1.213141] dwc2 3f980000.usb: Linked as a consumer to regulator.0 [ 1.213276] dwc2 3f980000.usb: 3f980000.usb supply vusb_a not found, using dummy regulator [ 1.214345] dwc2 3f980000.usb: dwc2_core_reset: HANG! Soft Reset timeout GRSTCTL GRSTCTL_CSFTRST [ 1.216492] dwc2: probe of 3f980000.usb failed with error -16 [ 1.218417] hctosys: unable to open rtc device (rtc0) [ 1.222984] uart-pl011 3f201000.serial: no DMA platform data [ 1.225904] Waiting for root device /dev/mmcblk0... [ 1.237574] mmc0: host does not support reading read-only switch, assuming write-enable [ 1.238291] mmc0: Problem switching card into high-speed mode! [ 1.238841] mmc0: new SD card at address 4567 [ 1.242409] mmcblk0: mmc0:4567 QEMU! 8.00 MiB [ 1.289167] EXT4-fs (mmcblk0): mounting ext3 file system using the ext4 subsystem [ 1.311524] EXT4-fs (mmcblk0): mounted filesystem with ordered data mode. Opts: (null) [ 1.312945] VFS: Mounted root (ext3 filesystem) on device 179:0. [ 1.321791] devtmpfs: mounted [ 1.437851] Freeing unused kernel memory: 2048K [ 1.565062] Run /sbin/init as init process INIT: version 2.88 booting mount: mounting devtmpfs on /dev failed: Device or resource busy INIT: Entering runlevel: 5 Boot successful. / # reboot INIT: Switching to runlevel: 6 / # INIT: Sending processes the TERM signal INIT: Sending processes the KILL signal INIT: no more processes left in this runlevel