[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Qemu-arm] [Qemu-devel] [PATCH v2 1/3] aspeed: add a per SoC mapping
From: |
Philippe Mathieu-Daudé |
Subject: |
Re: [Qemu-arm] [Qemu-devel] [PATCH v2 1/3] aspeed: add a per SoC mapping for the interrupt space |
Date: |
Mon, 6 May 2019 16:50:29 +0200 |
On Mon, May 6, 2019 at 4:48 PM Philippe Mathieu-Daudé <address@hidden> wrote:
> On 5/6/19 4:20 PM, Cédric Le Goater wrote:
> > This will simplify the definition of new SoCs, like the AST2600 which
> > should use a different CPU and a different IRQ number layout.
> >
> > Signed-off-by: Cédric Le Goater <address@hidden>
> > ---
> >
> > Changes since v1:
> >
> > - moved enum defining the Aspeed controller names under aspeed_soc.h
> >
> > include/hw/arm/aspeed_soc.h | 37 ++++++++++++++++++++++++
> > hw/arm/aspeed_soc.c | 57 +++++++++++++++++++++++++++++++------
> > 2 files changed, 86 insertions(+), 8 deletions(-)
> >
> > diff --git a/include/hw/arm/aspeed_soc.h b/include/hw/arm/aspeed_soc.h
> > index 11ec0179db50..2dd968092c69 100644
> > --- a/include/hw/arm/aspeed_soc.h
> > +++ b/include/hw/arm/aspeed_soc.h
> > @@ -57,6 +57,7 @@ typedef struct AspeedSoCInfo {
> > const char *fmc_typename;
> > const char **spi_typename;
> > int wdts_num;
> > + const int *irqmap;
> > } AspeedSoCInfo;
> >
> > typedef struct AspeedSoCClass {
> > @@ -69,4 +70,40 @@ typedef struct AspeedSoCClass {
> > #define ASPEED_SOC_GET_CLASS(obj) \
> > OBJECT_GET_CLASS(AspeedSoCClass, (obj), TYPE_ASPEED_SOC)
> >
> > +enum {
> > + ASPEED_IOMEM,
> > + ASPEED_UART1,
> > + ASPEED_UART2,
> > + ASPEED_UART3,
> > + ASPEED_UART4,
> > + ASPEED_UART5,
> > + ASPEED_VUART,
> > + ASPEED_FMC,
> > + ASPEED_SPI1,
> > + ASPEED_SPI2,
> > + ASPEED_VIC,
> > + ASPEED_SDMC,
> > + ASPEED_SCU,
> > + ASPEED_ADC,
> > + ASPEED_SRAM,
> > + ASPEED_GPIO,
> > + ASPEED_RTC,
> > + ASPEED_TIMER1,
> > + ASPEED_TIMER2,
> > + ASPEED_TIMER3,
> > + ASPEED_TIMER4,
> > + ASPEED_TIMER5,
> > + ASPEED_TIMER6,
> > + ASPEED_TIMER7,
> > + ASPEED_TIMER8,
> > + ASPEED_WDT,
> > + ASPEED_PWM,
> > + ASPEED_LPC,
> > + ASPEED_IBT,
> > + ASPEED_I2C,
> > + ASPEED_ETH1,
> > + ASPEED_ETH2,
> > + ASPEED_SDRAM,
>
> I'd add ...:
>
> ASPEED_IRQMAP_COUNT /* keep last */
Better name after reading patch 2/3: ASPEED_MODULE_COUNT?
> > +};
> > +
> > #endif /* ASPEED_SOC_H */
> > diff --git a/hw/arm/aspeed_soc.c b/hw/arm/aspeed_soc.c
> > index a27233d4876b..29bce5c9188c 100644
> > --- a/hw/arm/aspeed_soc.c
> > +++ b/hw/arm/aspeed_soc.c
> > @@ -38,12 +38,42 @@
> > #define ASPEED_SOC_ETH1_BASE 0x1E660000
> > #define ASPEED_SOC_ETH2_BASE 0x1E680000
> >
> > -static const int uart_irqs[] = { 9, 32, 33, 34, 10 };
> > -static const int timer_irqs[] = { 16, 17, 18, 35, 36, 37, 38, 39, };
> > +static const int aspeed_soc_ast2400_irqmap[] = {
>
> ... and use it here:
>
> static const int aspeed_soc_ast2400_irqmap[ASPEED_IRQMAP_COUNT] = {
>
> because you define ASPEED_SDRAM, and if some code access
> aspeed_soc_ast2400_irqmap[ASPEED_SDRAM] it would be uninitialized.
> Specifying the array size, the uninitialized entries are
> zero-initialized (not sure this is the default you expect although).
>
> > + [ASPEED_UART1] = 9,
> > + [ASPEED_UART2] = 32,
> > + [ASPEED_UART3] = 33,
> > + [ASPEED_UART4] = 34,
> > + [ASPEED_UART5] = 10,
> > + [ASPEED_VUART] = 8,
> > + [ASPEED_FMC] = 19,
> > + [ASPEED_SDMC] = 0,
> > + [ASPEED_SCU] = 21,
> > + [ASPEED_ADC] = 31,
> > + [ASPEED_GPIO] = 20,
> > + [ASPEED_RTC] = 22,
> > + [ASPEED_TIMER1] = 16,
> > + [ASPEED_TIMER2] = 17,
> > + [ASPEED_TIMER3] = 18,
> > + [ASPEED_TIMER4] = 35,
> > + [ASPEED_TIMER5] = 36,
> > + [ASPEED_TIMER6] = 37,
> > + [ASPEED_TIMER7] = 38,
> > + [ASPEED_TIMER8] = 39,
> > + [ASPEED_WDT] = 27,
> > + [ASPEED_PWM] = 28,
> > + [ASPEED_LPC] = 8,
> > + [ASPEED_IBT] = 8, /* LPC */
> > + [ASPEED_I2C] = 12,
> > + [ASPEED_ETH1] = 2,
> > + [ASPEED_ETH2] = 3,
> > +};
> >
> > #define AST2400_SDRAM_BASE 0x40000000
> > #define AST2500_SDRAM_BASE 0x80000000
> >
> > +/* AST2500 uses the same IRQs as the AST2400 */
> > +#define aspeed_soc_ast2500_irqmap aspeed_soc_ast2400_irqmap
> > +
> > static const hwaddr aspeed_soc_ast2400_spi_bases[] = { ASPEED_SOC_SPI_BASE
> > };
> > static const char *aspeed_soc_ast2400_typenames[] = { "aspeed.smc.spi" };
> >
> > @@ -64,6 +94,7 @@ static const AspeedSoCInfo aspeed_socs[] = {
> > .fmc_typename = "aspeed.smc.fmc",
> > .spi_typename = aspeed_soc_ast2400_typenames,
> > .wdts_num = 2,
> > + .irqmap = aspeed_soc_ast2400_irqmap,
> > }, {
> > .name = "ast2400-a1",
> > .cpu_type = ARM_CPU_TYPE_NAME("arm926"),
> > @@ -75,6 +106,7 @@ static const AspeedSoCInfo aspeed_socs[] = {
> > .fmc_typename = "aspeed.smc.fmc",
> > .spi_typename = aspeed_soc_ast2400_typenames,
> > .wdts_num = 2,
> > + .irqmap = aspeed_soc_ast2400_irqmap,
> > }, {
> > .name = "ast2400",
> > .cpu_type = ARM_CPU_TYPE_NAME("arm926"),
> > @@ -86,6 +118,7 @@ static const AspeedSoCInfo aspeed_socs[] = {
> > .fmc_typename = "aspeed.smc.fmc",
> > .spi_typename = aspeed_soc_ast2400_typenames,
> > .wdts_num = 2,
> > + .irqmap = aspeed_soc_ast2400_irqmap,
> > }, {
> > .name = "ast2500-a1",
> > .cpu_type = ARM_CPU_TYPE_NAME("arm1176"),
> > @@ -97,9 +130,17 @@ static const AspeedSoCInfo aspeed_socs[] = {
> > .fmc_typename = "aspeed.smc.ast2500-fmc",
> > .spi_typename = aspeed_soc_ast2500_typenames,
> > .wdts_num = 3,
> > + .irqmap = aspeed_soc_ast2500_irqmap,
> > },
> > };
> >
> > +static qemu_irq aspeed_soc_get_irq(AspeedSoCState *s, int ctrl)
> > +{
> > + AspeedSoCClass *sc = ASPEED_SOC_GET_CLASS(s);
> > +
> > + return qdev_get_gpio_in(DEVICE(&s->vic), sc->info->irqmap[ctrl]);
> > +}
> > +
> > static void aspeed_soc_init(Object *obj)
> > {
> > AspeedSoCState *s = ASPEED_SOC(obj);
> > @@ -226,14 +267,14 @@ static void aspeed_soc_realize(DeviceState *dev,
> > Error **errp)
> > return;
> > }
> > sysbus_mmio_map(SYS_BUS_DEVICE(&s->timerctrl), 0,
> > ASPEED_SOC_TIMER_BASE);
> > - for (i = 0; i < ARRAY_SIZE(timer_irqs); i++) {
> > - qemu_irq irq = qdev_get_gpio_in(DEVICE(&s->vic), timer_irqs[i]);
> > + for (i = 0; i < ASPEED_TIMER_NR_TIMERS; i++) {
> > + qemu_irq irq = aspeed_soc_get_irq(s, ASPEED_TIMER1 + i);
> > sysbus_connect_irq(SYS_BUS_DEVICE(&s->timerctrl), i, irq);
> > }
> >
> > /* UART - attach an 8250 to the IO space as our UART5 */
> > if (serial_hd(0)) {
> > - qemu_irq uart5 = qdev_get_gpio_in(DEVICE(&s->vic), uart_irqs[4]);
> > + qemu_irq uart5 = aspeed_soc_get_irq(s, ASPEED_UART5);
> > serial_mm_init(get_system_memory(),
> > ASPEED_SOC_IOMEM_BASE + ASPEED_SOC_UART_5_BASE, 2,
> > uart5, 38400, serial_hd(0), DEVICE_LITTLE_ENDIAN);
> > @@ -247,7 +288,7 @@ static void aspeed_soc_realize(DeviceState *dev, Error
> > **errp)
> > }
> > sysbus_mmio_map(SYS_BUS_DEVICE(&s->i2c), 0, ASPEED_SOC_I2C_BASE);
> > sysbus_connect_irq(SYS_BUS_DEVICE(&s->i2c), 0,
> > - qdev_get_gpio_in(DEVICE(&s->vic), 12));
> > + aspeed_soc_get_irq(s, ASPEED_I2C));
> >
> > /* FMC, The number of CS is set at the board level */
> > object_property_set_bool(OBJECT(&s->fmc), true, "realized", &err);
> > @@ -259,7 +300,7 @@ static void aspeed_soc_realize(DeviceState *dev, Error
> > **errp)
> > sysbus_mmio_map(SYS_BUS_DEVICE(&s->fmc), 1,
> > s->fmc.ctrl->flash_window_base);
> > sysbus_connect_irq(SYS_BUS_DEVICE(&s->fmc), 0,
> > - qdev_get_gpio_in(DEVICE(&s->vic), 19));
> > + aspeed_soc_get_irq(s, ASPEED_FMC));
> >
> > /* SPI */
> > for (i = 0; i < sc->info->spis_num; i++) {
> > @@ -307,7 +348,7 @@ static void aspeed_soc_realize(DeviceState *dev, Error
> > **errp)
> > }
> > sysbus_mmio_map(SYS_BUS_DEVICE(&s->ftgmac100), 0,
> > ASPEED_SOC_ETH1_BASE);
> > sysbus_connect_irq(SYS_BUS_DEVICE(&s->ftgmac100), 0,
> > - qdev_get_gpio_in(DEVICE(&s->vic), 2));
> > + aspeed_soc_get_irq(s, ASPEED_ETH1));
> > }
> >
> > static void aspeed_soc_class_init(ObjectClass *oc, void *data)
> >
>
> With the array explicit size:
> Reviewed-by: Philippe Mathieu-Daudé <address@hidden>