qemu-arm
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Qemu-arm] [PATCH v17 07/10] ACPI: Add APEI GHES table generation su


From: gengdongjiu
Subject: Re: [Qemu-arm] [PATCH v17 07/10] ACPI: Add APEI GHES table generation support
Date: Thu, 30 May 2019 22:47:59 +0800
User-agent: Mozilla/5.0 (Windows NT 6.1; WOW64; rv:52.0) Gecko/20100101 Thunderbird/52.3.0

Hi Michael,
   Thanks for the review.

On 2019/5/29 11:37, Michael S. Tsirkin wrote:
> On Tue, May 14, 2019 at 04:18:20AM -0700, Dongjiu Geng wrote:
>> This implements APEI GHES Table generation via fw_cfg blobs.
>> Now it only support GPIO-Signal and ARMv8 SEA two types of GHESv2 error
>> source. Afterwards, we can extend the supported types if needed. For the
>> CPER section type, currently it is memory section because kernel
>> mainly wants userspace to handle the memory errors.
>>
>> This patch follows the spec ACPI 6.2 to build the Hardware Error Source
>> table, for the detailed information, please refer to document:
>> docs/specs/acpi_hest_ghes.txt
>>
>> Suggested-by: Laszlo Ersek <address@hidden>
>> Signed-off-by: Dongjiu Geng <address@hidden>
>> ---
>>  default-configs/arm-softmmu.mak |   1 +
>>  hw/acpi/Kconfig                 |   4 +
>>  hw/acpi/Makefile.objs           |   1 +
>>  hw/acpi/acpi_ghes.c             | 171 
>> ++++++++++++++++++++++++++++++++++++++++
>>  hw/acpi/aml-build.c             |   2 +
>>  hw/arm/virt-acpi-build.c        |  12 +++
>>  include/hw/acpi/acpi_ghes.h     |  79 +++++++++++++++++++
>>  include/hw/acpi/aml-build.h     |   1 +
>>  8 files changed, 271 insertions(+)
>>  create mode 100644 hw/acpi/acpi_ghes.c
>>  create mode 100644 include/hw/acpi/acpi_ghes.h
>>
>> diff --git a/default-configs/arm-softmmu.mak 
>> b/default-configs/arm-softmmu.mak
>> index 613d19a..7b33ae9 100644
>> --- a/default-configs/arm-softmmu.mak
>> +++ b/default-configs/arm-softmmu.mak
>> @@ -160,3 +160,4 @@ CONFIG_MUSICPAL=y
>>  
>>  # for realview and versatilepb
>>  CONFIG_LSI_SCSI_PCI=y
>> +CONFIG_ACPI_APEI=y
>> diff --git a/hw/acpi/Kconfig b/hw/acpi/Kconfig
>> index eca3bee..5228a4b 100644
>> --- a/hw/acpi/Kconfig
>> +++ b/hw/acpi/Kconfig
>> @@ -23,6 +23,10 @@ config ACPI_NVDIMM
>>      bool
>>      depends on ACPI
>>  
>> +config ACPI_APEI
>> +    bool
>> +    depends on ACPI
>> +
>>  config ACPI_VMGENID
>>      bool
>>      default y
>> diff --git a/hw/acpi/Makefile.objs b/hw/acpi/Makefile.objs
>> index 2d46e37..5099ada 100644
>> --- a/hw/acpi/Makefile.objs
>> +++ b/hw/acpi/Makefile.objs
>> @@ -6,6 +6,7 @@ common-obj-$(CONFIG_ACPI_MEMORY_HOTPLUG) += memory_hotplug.o
>>  common-obj-$(CONFIG_ACPI_CPU_HOTPLUG) += cpu.o
>>  common-obj-$(CONFIG_ACPI_NVDIMM) += nvdimm.o
>>  common-obj-$(CONFIG_ACPI_VMGENID) += vmgenid.o
>> +common-obj-$(CONFIG_ACPI_APEI) += acpi_ghes.o
>>  common-obj-$(call lnot,$(CONFIG_ACPI_X86)) += acpi-stub.o
>>  
>>  common-obj-y += acpi_interface.o
>> diff --git a/hw/acpi/acpi_ghes.c b/hw/acpi/acpi_ghes.c
>> new file mode 100644
>> index 0000000..d03e797
>> --- /dev/null
>> +++ b/hw/acpi/acpi_ghes.c
>> @@ -0,0 +1,171 @@
>> +/* Support for generating APEI tables and record CPER for Guests
>> + *
>> + * Copyright (C) 2017 HuaWei Corporation.
>> + *
>> + * Author: Dongjiu Geng <address@hidden>
>> + *
>> + * This program is free software; you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License as published by
>> + * the Free Software Foundation; either version 2 of the License, or
>> + * (at your option) any later version.
>> +
>> + * This program is distributed in the hope that it will be useful,
>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
>> + * GNU General Public License for more details.
>> +
>> + * You should have received a copy of the GNU General Public License along
>> + * with this program; if not, see <http://www.gnu.org/licenses/>.
>> + */
>> +
>> +#include "qemu/osdep.h"
>> +#include "hw/acpi/acpi.h"
>> +#include "hw/acpi/aml-build.h"
>> +#include "hw/acpi/acpi_ghes.h"
>> +#include "hw/nvram/fw_cfg.h"
>> +#include "sysemu/sysemu.h"
>> +#include "qemu/error-report.h"
>> +
>> +/* Build table for the hardware error fw_cfg blob */
>> +void build_hardware_error_table(GArray *hardware_errors, BIOSLinker *linker)
>> +{
>> +    int i;
>> +
>> +    /*
>> +     * | +--------------------------+
>> +     * | |    error_block_address   |
>> +     * | |      ..........          |
>> +     * | +--------------------------+
>> +     * | |    read_ack_register     |
>> +     * | |     ...........          |
>> +     * | +--------------------------+
>> +     * | |  Error Status Data Block |
>> +     * | |      ........            |
>> +     * | +--------------------------+
>> +     */
>> +
>> +    /* Build error_block_address */
>> +    build_append_int_noprefix((void *)hardware_errors, 0,
>> +                    GHES_ADDRESS_SIZE * ACPI_HEST_ERROR_SOURCE_COUNT);
> 
> Why are you casting everything to void *?
> 
> C type safety goes out the window ...
  I will remove the "void *" transform.

> 
>> +
>> +    /* Build read_ack_register */
>> +    for (i = 0; i < ACPI_HEST_ERROR_SOURCE_COUNT; i++)
>> +        /* Initialize the value of read_ack_register to 1, so GHES can be
>> +         * writeable in the first time
>> +         */
>> +        build_append_int_noprefix((void *)hardware_errors, 1, 
>> GHES_ADDRESS_SIZE);
>> +
>> +     /* Build Error Status Data Block */
>> +    build_append_int_noprefix((void *)hardware_errors, 0,
>> +                    GHES_MAX_RAW_DATA_LENGTH * 
>> ACPI_HEST_ERROR_SOURCE_COUNT);
>> +
>> +    /* Allocate guest memory for the hardware error fw_cfg blob */
>> +    bios_linker_loader_alloc(linker, GHES_ERRORS_FW_CFG_FILE, 
>> hardware_errors,
>> +                            1, false);
>> +}
>> +
>> +/* Build Hardware Error Source Table */
>> +void build_apei_hest(GArray *table_data, GArray *hardware_errors,
>> +                                            BIOSLinker *linker)
>> +{
>> +    uint32_t i, error_status_block_offset, length = table_data->len;
>> +
>> +    /* Reserve Hardware Error Source Table header size */
>> +    acpi_data_push(table_data, sizeof(AcpiTableHeader));
>> +
>> +    /* Set the error source counts */
>> +    build_append_int_noprefix(table_data, ACPI_HEST_ERROR_SOURCE_COUNT, 4);
>> +
>> +    for (i = 0; i < ACPI_HEST_ERROR_SOURCE_COUNT; i++) {
>> +        /* Generic Hardware Error Source version 2(GHESv2 - Type 10)
>> +         */
>> +        build_append_int_noprefix(table_data,
>> +            ACPI_HEST_SOURCE_GENERIC_ERROR_V2, 2); /* type */
>> +        build_append_int_noprefix(table_data, cpu_to_le16(i), 2); /* source 
>> id */
>> +        build_append_int_noprefix(table_data, 0xffff, 2); /* related source 
>> id */
>> +        build_append_int_noprefix(table_data, 0, 1); /* flags */
>> +
>> +        build_append_int_noprefix(table_data, 1, 1); /* enabled */
>> +
>> +        /* Number of Records To Pre-allocate */
>> +        build_append_int_noprefix(table_data, 1, 4);
>> +        /* Max Sections Per Record */
>> +        build_append_int_noprefix(table_data, 1, 4);
>> +        /* Max Raw Data Length */
>> +        build_append_int_noprefix(table_data, GHES_MAX_RAW_DATA_LENGTH, 4);
>> +
>> +        /* Build error status address*/
>> +        build_append_gas(table_data, AML_SYSTEM_MEMORY, 0x40, 0, 4 /* QWord 
>> access */, 0);
>> +        bios_linker_loader_add_pointer(linker,
>> +            ACPI_BUILD_TABLE_FILE, ERROR_STATUS_ADDRESS_OFFSET(length, i),
>> +            GHES_ADDRESS_SIZE, GHES_ERRORS_FW_CFG_FILE, i * 
>> GHES_ADDRESS_SIZE);
>> +
>> +        /* Build Hardware Error Notification
>> +         * Now only enable GPIO-Signal and ARMv8 SEA notification types
>> +         */
>> +        if (i == 0) {
>> +            build_append_ghes_notify(table_data, ACPI_HEST_NOTIFY_GPIO, 28,
>> +                                     0, 0, 0, 0, 0, 0, 0);
>> +        } else if (i == 1) {
>> +            build_append_ghes_notify(table_data, ACPI_HEST_NOTIFY_SEA, 28, 
>> 0,
>> +                                     0, 0, 0, 0, 0, 0);
>> +        }
>> +
>> +        /* Error Status Block Length */
>> +        build_append_int_noprefix(table_data,
>> +            cpu_to_le32(GHES_MAX_RAW_DATA_LENGTH), 4);
>> +
>> +        /* Build Read ACK register
>> +         * ACPI 6.1/6.2: 18.3.2.8 Generic Hardware Error Source
>> +         * version 2 (GHESv2 - Type 10)
>> +         */
>> +        build_append_gas(table_data, AML_SYSTEM_MEMORY, 0x40, 0, 4 /* QWord 
>> access */, 0);
>> +        bios_linker_loader_add_pointer(linker, ACPI_BUILD_TABLE_FILE,
>> +            READ_ACK_REGISTER_ADDRESS_OFFSET(length, i), GHES_ADDRESS_SIZE,
>> +            GHES_ERRORS_FW_CFG_FILE,
>> +            (ACPI_HEST_ERROR_SOURCE_COUNT + i) * GHES_ADDRESS_SIZE);
>> +
>> +        /* Build Read Ack Preserve and Read Ack Writer */
>> +        build_append_int_noprefix(table_data, cpu_to_le64(ReadAckPreserve), 
>> 8);
>> +        build_append_int_noprefix(table_data, cpu_to_le64(ReadAckWrite), 8);
>> +    }
>> +
>> +    /* Generic Error Status Block offset in the hardware error fw_cfg blob 
>> */
>> +    error_status_block_offset = GHES_ADDRESS_SIZE * 2 *
>> +                                ACPI_HEST_ERROR_SOURCE_COUNT;
>> +
>> +    for (i = 0; i < ACPI_HEST_ERROR_SOURCE_COUNT; i++)
>> +        /* Patch address of Error Status Data Block into
>> +         * the error_block_address of hardware_errors fw_cfg blob
>> +         */
>> +        bios_linker_loader_add_pointer(linker,
>> +            GHES_ERRORS_FW_CFG_FILE, GHES_ADDRESS_SIZE * i, 
>> GHES_ADDRESS_SIZE,
>> +            GHES_ERRORS_FW_CFG_FILE,
>> +            error_status_block_offset + i * GHES_MAX_RAW_DATA_LENGTH);
>> +
>> +    /* write address of hardware_errors fw_cfg blob into the
>> +     * hardware_errors_addr fw_cfg blob.
>> +     */
>> +    bios_linker_loader_write_pointer(linker, GHES_DATA_ADDR_FW_CFG_FILE,
>> +        0, GHES_ADDRESS_SIZE, GHES_ERRORS_FW_CFG_FILE, 0);
>> +
>> +    build_header(linker, table_data,
>> +        (void *)(table_data->data + length), "HEST",
>> +        table_data->len - length, 1, NULL, "GHES");
>> +}
>> +
>> +static GhesState ges;
>> +void ghes_add_fw_cfg(FWCfgState *s, GArray *hardware_error)
>> +{
>> +
>> +    size_t size = 2 * GHES_ADDRESS_SIZE + GHES_MAX_RAW_DATA_LENGTH;
>> +    size_t request_block_size = ACPI_HEST_ERROR_SOURCE_COUNT * size;
>> +
>> +    /* Create a read-only fw_cfg file for GHES */
>> +    fw_cfg_add_file(s, GHES_ERRORS_FW_CFG_FILE, hardware_error->data,
>> +                    request_block_size);
>> +
>> +    /* Create a read-write fw_cfg file for Address */
>> +    fw_cfg_add_file_callback(s, GHES_DATA_ADDR_FW_CFG_FILE, NULL, NULL, 
>> NULL,
>> +        &ges.ghes_addr_le, sizeof(ges.ghes_addr_le), false);
>> +}
>> diff --git a/hw/acpi/aml-build.c b/hw/acpi/aml-build.c
>> index ce90970..3f2b84f 100644
>> --- a/hw/acpi/aml-build.c
>> +++ b/hw/acpi/aml-build.c
>> @@ -1645,6 +1645,7 @@ void acpi_build_tables_init(AcpiBuildTables *tables)
>>      tables->table_data = g_array_new(false, true /* clear */, 1);
>>      tables->tcpalog = g_array_new(false, true /* clear */, 1);
>>      tables->vmgenid = g_array_new(false, true /* clear */, 1);
>> +    tables->hardware_errors = g_array_new(false, true /* clear */, 1);
>>      tables->linker = bios_linker_loader_init();
>>  }
>>  
>> @@ -1655,6 +1656,7 @@ void acpi_build_tables_cleanup(AcpiBuildTables 
>> *tables, bool mfre)
>>      g_array_free(tables->table_data, true);
>>      g_array_free(tables->tcpalog, mfre);
>>      g_array_free(tables->vmgenid, mfre);
>> +    g_array_free(tables->hardware_errors, mfre);
>>  }
>>  
>>  /*
>> diff --git a/hw/arm/virt-acpi-build.c b/hw/arm/virt-acpi-build.c
>> index bf9c0bc..54f4ba5 100644
>> --- a/hw/arm/virt-acpi-build.c
>> +++ b/hw/arm/virt-acpi-build.c
>> @@ -45,6 +45,7 @@
>>  #include "hw/arm/virt.h"
>>  #include "sysemu/numa.h"
>>  #include "kvm_arm.h"
>> +#include "hw/acpi/acpi_ghes.h"
>>  
>>  #define ARM_SPI_BASE 32
>>  #define ACPI_POWER_BUTTON_DEVICE "PWRB"
>> @@ -808,6 +809,12 @@ void virt_acpi_build(VirtMachineState *vms, 
>> AcpiBuildTables *tables)
>>      acpi_add_table(table_offsets, tables_blob);
>>      build_spcr(tables_blob, tables->linker, vms);
>>  
>> +    if (!vmc->no_ras) {
>> +        acpi_add_table(table_offsets, tables_blob);
>> +        build_hardware_error_table(tables->hardware_errors, tables->linker);
>> +        build_apei_hest(tables_blob, tables->hardware_errors, 
>> tables->linker);
>> +    }
>> +
>>      if (nb_numa_nodes > 0) {
>>          acpi_add_table(table_offsets, tables_blob);
>>          build_srat(tables_blob, tables->linker, vms);
>> @@ -901,6 +908,7 @@ static const VMStateDescription vmstate_virt_acpi_build 
>> = {
>>  
>>  void virt_acpi_setup(VirtMachineState *vms)
>>  {
>> +    VirtMachineClass *vmc = VIRT_MACHINE_GET_CLASS(vms);
>>      AcpiBuildTables tables;
>>      AcpiBuildState *build_state;
>>  
>> @@ -932,6 +940,10 @@ void virt_acpi_setup(VirtMachineState *vms)
>>      fw_cfg_add_file(vms->fw_cfg, ACPI_BUILD_TPMLOG_FILE, 
>> tables.tcpalog->data,
>>                      acpi_data_len(tables.tcpalog));
>>  
>> +    if (!vmc->no_ras) {
>> +        ghes_add_fw_cfg(vms->fw_cfg, tables.hardware_errors);
>> +    }
>> +
>>      build_state->rsdp_mr = acpi_add_rom_blob(build_state, tables.rsdp,
>>                                                ACPI_BUILD_RSDP_FILE, 0);
>>  
>> diff --git a/include/hw/acpi/acpi_ghes.h b/include/hw/acpi/acpi_ghes.h
>> new file mode 100644
>> index 0000000..38fd87c
>> --- /dev/null
>> +++ b/include/hw/acpi/acpi_ghes.h
>> @@ -0,0 +1,79 @@
>> +/* Support for generating APEI tables and record CPER for Guests
>> + *
>> + * Copyright (C) 2017 HuaWei Corporation.
>> + *
>> + * Author: Dongjiu Geng <address@hidden>
>> + *
>> + * This program is free software; you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License as published by
>> + * the Free Software Foundation; either version 2 of the License, or
>> + * (at your option) any later version.
>> +
>> + * This program is distributed in the hope that it will be useful,
>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
>> + * GNU General Public License for more details.
>> +
>> + * You should have received a copy of the GNU General Public License along
>> + * with this program; if not, see <http://www.gnu.org/licenses/>.
>> + */
>> +
>> +#ifndef ACPI_GHES_H
>> +#define ACPI_GHES_H
>> +
>> +#include "hw/acpi/bios-linker-loader.h"
>> +
>> +#define GHES_ERRORS_FW_CFG_FILE         "etc/hardware_errors"
>> +#define GHES_DATA_ADDR_FW_CFG_FILE      "etc/hardware_errors_addr"
>> +
>> +/* The size of Address field in Generic Address Structure,
>> + * ACPI 2.0/3.0: 5.2.3.1 Generic Address Structure.
>> + */
>> +#define GHES_ADDRESS_SIZE           8
>> +
>> +#define GHES_DATA_LENGTH            72
>> +#define GHES_CPER_LENGTH            80
> 
> 
> Don't see above two used anywhere in this patch.
> Pls move to patch that uses them.
yes, thanks for the reminder. I use above two variables in another patch, not 
in this patch,
I will move them to another patch.

> 
>> +
>> +#define ReadAckPreserve             0xfffffffe
>> +#define ReadAckWrite                0x1
> 
> Why are these macros not all upper case?
> I suggest just open-coding at use point
> and adding a comment:
> 
>         build_append_int_noprefix(table_data, cpu_to_le64(0xfffffffe), 8); /* 
> ReadAckPreserve */
>         build_append_int_noprefix(table_data, cpu_to_le64(0x1), 8); /* 
> ReadAckWrite */
Ok, I will change them, thanks.

> 
>> +
>> +/* The max size in bytes for one error block */
>> +#define GHES_MAX_RAW_DATA_LENGTH        0x1000
>> +/* Now only have GPIO-Signal and ARMv8 SEA notification types error sources
>> + */
>> +#define ACPI_HEST_ERROR_SOURCE_COUNT    2>
> 
> Please prefix everything with acpi_ghes_
> 
> Or move to acpi/ghes.h and then prefix with ghes_ 
ok, I will do it.

> 
>> +
>> +/*
>> + * | +--------------------------+ 0
>> + * | |        Header            |
>> + * | +--------------------------+ 40---+-
>> + * | | .................        |      |
>> + * | | error_status_address-----+ 60   |
>> + * | | .................        |      |
>> + * | | read_ack_register--------+ 104  92
>> + * | | read_ack_preserve        |      |
>> + * | | read_ack_write           |      |
>> + * + +--------------------------+ 132--+-
>> + *
>> + * From above GHES definition, the error status address offset is 60;
>> + * the Read ack register offset is 104, the whole size of GHESv2 is 92
>> + */
>> +
>> +/* The error status address offset in GHES */
>> +#define ERROR_STATUS_ADDRESS_OFFSET(start_addr, n)     (start_addr + 60 + \
>> +                    offsetof(struct AcpiGenericAddress, address) + n * 92)
>> +
>> +/* The read Ack register offset in GHES */
>> +#define READ_ACK_REGISTER_ADDRESS_OFFSET(start_addr, n) (start_addr + 104 + 
>> \
>> +                    offsetof(struct AcpiGenericAddress, address) + n * 92)
>> +
>> +typedef struct GhesState {
>> +    uint64_t ghes_addr_le;
>> +} GhesState;
>> +
>> +void build_apei_hest(GArray *table_data, GArray *hardware_error,
>> +                     BIOSLinker *linker);
>> +
>> +void build_hardware_error_table(GArray *hardware_errors, BIOSLinker 
>> *linker);
>> +void ghes_add_fw_cfg(FWCfgState *s, GArray *hardware_errors);
>> +#endif
>> diff --git a/include/hw/acpi/aml-build.h b/include/hw/acpi/aml-build.h
>> index 1ec7e1b..78c0252 100644
>> --- a/include/hw/acpi/aml-build.h
>> +++ b/include/hw/acpi/aml-build.h
>> @@ -220,6 +220,7 @@ struct AcpiBuildTables {
>>      GArray *rsdp;
>>      GArray *tcpalog;
>>      GArray *vmgenid;
>> +    GArray *hardware_errors;
>>      BIOSLinker *linker;
>>  } AcpiBuildTables;
>>  
>> -- 
>> 1.8.3.1
> .
> 




reply via email to

[Prev in Thread] Current Thread [Next in Thread]