qemu-arm
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Qemu-arm] [Qemu-devel] [PATCH-for-4.2 v8 6/9] hw/arm/virt: Enable d


From: Shameerali Kolothum Thodi
Subject: Re: [Qemu-arm] [Qemu-devel] [PATCH-for-4.2 v8 6/9] hw/arm/virt: Enable device memory cold/hot plug with ACPI boot
Date: Wed, 7 Aug 2019 14:00:44 +0000


> -----Original Message-----
> From: Igor Mammedov [mailto:address@hidden]
> Sent: 07 August 2019 10:15
> To: Shameerali Kolothum Thodi <address@hidden>
> Cc: address@hidden; address@hidden;
> address@hidden; address@hidden; address@hidden;
> address@hidden; Linuxarm <address@hidden>; xuwei (O)
> <address@hidden>; address@hidden;
> address@hidden; address@hidden
> Subject: Re: [Qemu-devel] [PATCH-for-4.2 v8 6/9] hw/arm/virt: Enable device
> memory cold/hot plug with ACPI boot
> 
> On Wed, 7 Aug 2019 08:19:16 +0000
> Shameerali Kolothum Thodi <address@hidden> wrote:
> 
> > Hi Igor,
> >
> > > -----Original Message-----
> > > From: Igor Mammedov [mailto:address@hidden]
> > > Sent: 06 August 2019 14:09
> > > To: Shameerali Kolothum Thodi <address@hidden>
> > > Cc: address@hidden; address@hidden;
> > > address@hidden; address@hidden;
> address@hidden;
> > > address@hidden; Linuxarm <address@hidden>; xuwei (O)
> > > <address@hidden>; address@hidden;
> > > address@hidden; address@hidden
> > > Subject: Re: [Qemu-devel] [PATCH-for-4.2 v8 6/9] hw/arm/virt: Enable
> device
> > > memory cold/hot plug with ACPI boot
> >
> > [...]
> >
> > > > +static inline DeviceState *create_acpi_ged(VirtMachineState *vms,
> > > qemu_irq *pic)
> > > > +{
> > > > +    DeviceState *dev;
> > > > +    int irq = vms->irqmap[VIRT_ACPI_GED];
> > > > +    uint32_t event = ACPI_GED_MEM_HOTPLUG_EVT;
> > > > +
> > > > +    dev = DEVICE(object_new(TYPE_ACPI_GED));
> > > > +    qdev_prop_set_uint64(dev, "memhp-base",
> > > > +
> vms->memmap[VIRT_PCDIMM_ACPI].base);
> > > > +    qdev_prop_set_uint64(dev, "ged-base",
> > > vms->memmap[VIRT_ACPI_GED].base);
> > > > +    qdev_prop_set_uint32(dev, "ged-event", event);
> > > > +    object_property_add_child(qdev_get_machine(), "acpi-ged",
> > > > +                              OBJECT(dev), NULL);
> > > > +    qdev_init_nofail(dev);
> > > > +    qdev_connect_gpio_out_named(dev, "ged-irq", 0, pic[irq]);
> > > > +
> > > > +    object_unref(OBJECT(dev));
> > > > +
> > > > +    return dev;
> > > > +}
> > >
> > > this function will need changes to accommodate for sysbus device
> > > init sequence [3/9].
> >
> > Yes. I think we are proposing to use sysbus_mmio_map() here for "ged-base".
> > But what about " memhp-base"? Is it ok to invoke
> > acpi_memory_hotplug_init(get_system_memoty(), ...) from ged device?
> no it's not ok.
> 
> One could expose container memory region as sysbus mmio and then put
> ged-io and AcpiGedState::memhp_state::io within it.
> something like:
> 
>         board:
>             sysbus_mmio_map(ged, 0 /* io_contaner number */, ged-base)
> 
>         ged_initfn()
>             register io_container as sysbus mmio region
> 
>         ged_realize()
>             memory_region_add_subregion(&ged->io_container, 0,
> &ged_st->io);
>             acpi_memory_hotplug_init(&ged->io_container,,
> &ged->acpi_memory_hotplug, AFTER_GED_IO_OFFSET)
> 
> that would make GED's MMIO available to guest at ged-base and memhp IO
> will be available at address after it.
> You can go even further (more flexible) and register ged_st->io as separate
> sysbus mmio and use a container exclusively for memhp, in this case you'd be
> able to map memhp io from board independently from ged-base.

Ok. Understood. Thanks.

But looks like both the approaches would require changes to 
build_memory_hotplug_aml()
code as acpi_memory_hotplug_init() stores the io_base and reuse that in _aml() 
code.

I will have a go and see.

Thanks,
Shameer

> 
> > Or go with _set_link() function to pass the address space ?
> >
> > Thanks,
> > Shameer
> >
> >
> > > > +
> > > >  static void create_its(VirtMachineState *vms, DeviceState *gicdev)
> > > >  {
> > > >      const char *itsclass = its_class_name();
> > > > @@ -1483,6 +1508,7 @@ static void machvirt_init(MachineState
> *machine)
> > > >      MemoryRegion *ram = g_new(MemoryRegion, 1);
> > > >      bool firmware_loaded;
> > > >      bool aarch64 = true;
> > > > +    bool has_ged = !vmc->no_ged;
> > > >      unsigned int smp_cpus = machine->smp.cpus;
> > > >      unsigned int max_cpus = machine->smp.max_cpus;
> > > >
> > > > @@ -1697,6 +1723,10 @@ static void machvirt_init(MachineState
> > > *machine)
> > > >
> > > >      create_gpio(vms, pic);
> > > >
> > > > +    if (has_ged && aarch64 && firmware_loaded && acpi_enabled) {
> > > > +        vms->acpi_dev = create_acpi_ged(vms, pic);
> > > > +    }
> > > > +
> > > >      /* Create mmio transports, so the user can create virtio backends
> > > >       * (which will be automatically plugged in to the transports). If
> > > >       * no backend is created the transport will just sit harmlessly 
> > > > idle.
> > > > @@ -1876,27 +1906,34 @@ static const CPUArchIdList
> > > *virt_possible_cpu_arch_ids(MachineState *ms)
> > > >  static void virt_memory_pre_plug(HotplugHandler *hotplug_dev,
> > > DeviceState *dev,
> > > >                                   Error **errp)
> > > >  {
> > > > +    VirtMachineState *vms = VIRT_MACHINE(hotplug_dev);
> > > > +    const bool is_nvdimm = object_dynamic_cast(OBJECT(dev),
> > > TYPE_NVDIMM);
> > > >
> > > > -    /*
> > > > -     * The device memory is not yet exposed to the Guest either
> through
> > > > -     * DT or ACPI and hence both cold/hot plug of memory is explicitly
> > > > -     * disabled for now.
> > > > -     */
> > > > -    if (object_dynamic_cast(OBJECT(dev), TYPE_PC_DIMM)) {
> > > > -        error_setg(errp, "memory cold/hot plug is not yet supported");
> > > > +    if (is_nvdimm) {
> > > > +        error_setg(errp, "nvdimm is not yet supported");
> > > >          return;
> > > >      }
> > > >
> > > > +    if (!vms->acpi_dev) {
> > > > +        error_setg(errp, "memory hotplug is not enabled: missing acpi
> > > device");
> > > > +        return;
> > > > +    }
> > > > +
> > > > +    hotplug_handler_pre_plug(HOTPLUG_HANDLER(vms->acpi_dev),
> dev,
> > > errp);
> > > use local_error and check for error condition here. see
> pc_memory_pre_plug()
> > >
> > > > +
> > > >      pc_dimm_pre_plug(PC_DIMM(dev), MACHINE(hotplug_dev),
> NULL,
> > > errp);
> > > >  }
> > > >
> > > >  static void virt_memory_plug(HotplugHandler *hotplug_dev,
> > > >                               DeviceState *dev, Error **errp)
> > > >  {
> > > > +    HotplugHandlerClass *hhc;
> > > >      VirtMachineState *vms = VIRT_MACHINE(hotplug_dev);
> > > >
> > > >      pc_dimm_plug(PC_DIMM(dev), MACHINE(vms), NULL);
> > >                                                 ^^^^
> > > >
> > > > +    hhc = HOTPLUG_HANDLER_GET_CLASS(vms->acpi_dev);
> > > > +    hhc->plug(HOTPLUG_HANDLER(vms->acpi_dev), dev, NULL);
> > >                                                       ^^^^
> > > why errors are ignored here, pls check for errors and propagate
> > > them to the caller.
> > >
> > > >  }
> > > >
> > > >  static void virt_machine_device_pre_plug_cb(HotplugHandler
> > > *hotplug_dev,
> > > > @@ -2102,8 +2139,11 @@ DEFINE_VIRT_MACHINE_AS_LATEST(4, 2)
> > > >
> > > >  static void virt_machine_4_1_options(MachineClass *mc)
> > > >  {
> > > > +    VirtMachineClass *vmc =
> VIRT_MACHINE_CLASS(OBJECT_CLASS(mc));
> > > > +
> > > >      virt_machine_4_2_options(mc);
> > > >      compat_props_add(mc->compat_props, hw_compat_4_1,
> > > hw_compat_4_1_len);
> > > > +    vmc->no_ged = true;
> > > >  }
> > > >  DEFINE_VIRT_MACHINE(4, 1)
> > > >
> > > > diff --git a/include/hw/arm/virt.h b/include/hw/arm/virt.h
> > > > index a72094204e..577ee49b4b 100644
> > > > --- a/include/hw/arm/virt.h
> > > > +++ b/include/hw/arm/virt.h
> > > > @@ -77,6 +77,8 @@ enum {
> > > >      VIRT_GPIO,
> > > >      VIRT_SECURE_UART,
> > > >      VIRT_SECURE_MEM,
> > > > +    VIRT_PCDIMM_ACPI,
> > > > +    VIRT_ACPI_GED,
> > > >      VIRT_LOWMEMMAP_LAST,
> > > >  };
> > > >
> > > > @@ -106,6 +108,7 @@ typedef struct {
> > > >      bool claim_edge_triggered_timers;
> > > >      bool smbios_old_sys_ver;
> > > >      bool no_highmem_ecam;
> > > > +    bool no_ged;   /* Machines < 4.2 has no support for ACPI GED
> device
> > > */
> > > >  } VirtMachineClass;
> > > >
> > > >  typedef struct {
> > > > @@ -133,6 +136,7 @@ typedef struct {
> > > >      uint32_t iommu_phandle;
> > > >      int psci_conduit;
> > > >      hwaddr highest_gpa;
> > > > +    DeviceState *acpi_dev;
> > > >  } VirtMachineState;
> > > >
> > > >  #define VIRT_ECAM_ID(high) (high ? VIRT_HIGH_PCIE_ECAM :
> > > VIRT_PCIE_ECAM)
> > > > diff --git a/tests/bios-tables-test-allowed-diff.h
> > > b/tests/bios-tables-test-allowed-diff.h
> > > > index dfb8523c8b..7b4adbc822 100644
> > > > --- a/tests/bios-tables-test-allowed-diff.h
> > > > +++ b/tests/bios-tables-test-allowed-diff.h
> > > > @@ -1 +1,2 @@
> > > >  /* List of comma-separated changed AML files to ignore */
> > > > +"tests/data/acpi/virt/DSDT",
> >




reply via email to

[Prev in Thread] Current Thread [Next in Thread]