[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[PATCH 19/19] tests/boot_linux_console: Test SDHCI and termal sensor on
From: |
Philippe Mathieu-Daudé |
Subject: |
[PATCH 19/19] tests/boot_linux_console: Test SDHCI and termal sensor on raspi3 |
Date: |
Thu, 26 Sep 2019 19:34:27 +0200 |
Add a test which loads the root filesystem on a SD card.
Use a kernel recent enough to also test the thermal sensor.
The kernel image comes from:
https://github.com/sakaki-/bcmrpi3-kernel#description
The cpio image used comes from the linux-build-test project:
https://github.com/groeck/linux-build-test
Signed-off-by: Philippe Mathieu-Daudé <address@hidden>
---
tests/acceptance/boot_linux_console.py | 45 ++++++++++++++++++++++++++
1 file changed, 45 insertions(+)
diff --git a/tests/acceptance/boot_linux_console.py
b/tests/acceptance/boot_linux_console.py
index 2a1a23763e..5c48cacba8 100644
--- a/tests/acceptance/boot_linux_console.py
+++ b/tests/acceptance/boot_linux_console.py
@@ -410,6 +410,51 @@ class BootLinuxConsole(Test):
self.exec_command_and_wait_for_pattern('reboot',
'reboot: Restarting system')
+ def test_arm_raspi3_initrd_sd_temp(self):
+ """
+ :avocado: tags=arch:aarch64
+ :avocado: tags=machine:raspi3
+ """
+ tarball_url = ('https://github.com/sakaki-/bcmrpi3-kernel/releases/'
+ 'download/4.19.71.20190910/'
+ 'bcmrpi3-kernel-4.19.71.20190910.tar.xz')
+ tarball_hash = '844f117a1a6de0532ba92d2a7bceb5b2acfbb298'
+ tarball_path = self.fetch_asset(tarball_url, asset_hash=tarball_hash)
+ archive.extract(tarball_path, self.workdir)
+ dtb_path = self.workdir + "/boot/bcm2837-rpi-3-b.dtb"
+ kernel_path = self.workdir + "/boot/kernel8.img"
+
+ rootfs_url = ('https://github.com/groeck/linux-build-test/raw/'
+ '9b6b392ea7bc15f0d6632328d429d31c9c6273da/rootfs/'
+ 'arm64/rootfs.ext2.gz')
+ rootfs_hash = 'dbe4136f0b4a0d2180b93fd2a3b9a784f9951d10'
+ rootfs_path_gz = self.fetch_asset(rootfs_url, asset_hash=rootfs_hash)
+ rootfs_path = self.workdir + "rootfs.ext2"
+ gunzip(rootfs_path_gz, rootfs_path)
+
+ self.vm.set_machine('raspi3')
+ self.vm.set_console()
+ kernel_command_line = (self.KERNEL_COMMON_COMMAND_LINE +
+ 'earlycon=pl011,0x3f201000 console=ttyAMA0 ' +
+ 'root=/dev/mmcblk0 rootwait rw ' +
+ 'panic=-1 noreboot')
+ self.vm.add_args('-kernel', kernel_path,
+ '-dtb', dtb_path,
+ '-append', kernel_command_line,
+ '-drive', 'file=' + rootfs_path + ',if=sd,format=raw',
+ '-no-reboot')
+ self.vm.launch()
+
+ self.wait_for_console_pattern('Boot successful.')
+
+ self.exec_command_and_wait_for_pattern('cat /proc/cpuinfo',
+ 'Raspberry Pi 3 Model B')
+ self.exec_command_and_wait_for_pattern('cat /sys/devices/virtual/' +
+ 'thermal/thermal_zone0/temp',
+ '25178')
+ self.exec_command_and_wait_for_pattern('reboot',
+ 'reboot: Restarting system')
+
def test_s390x_s390_ccw_virtio(self):
"""
:avocado: tags=arch:s390x
--
2.20.1
- Re: [PATCH 14/19] python/qemu/machine: Allow to use other serial consoles than default, (continued)
[PATCH 13/19] hw/arm/raspi: Define various blocks base addresses, Philippe Mathieu-Daudé, 2019/09/26
[PATCH 12/19] hw/arm/bcm2835_peripherals: Add Clock/Power/Reset Manager blocks, Philippe Mathieu-Daudé, 2019/09/26
[PATCH 15/19] tests/boot_linux_console: Extract the gunzip() helper, Philippe Mathieu-Daudé, 2019/09/26
[PATCH 16/19] tests/boot_linux_console: Add a test for the Raspberry Pi 2, Philippe Mathieu-Daudé, 2019/09/26
[PATCH 17/19] tests/boot_linux_console: Test the raspi2 UART1 (16550 based), Philippe Mathieu-Daudé, 2019/09/26
[PATCH 18/19] tests/boot_linux_console: Boot Linux and run few commands on raspi3, Philippe Mathieu-Daudé, 2019/09/26
[PATCH 19/19] tests/boot_linux_console: Test SDHCI and termal sensor on raspi3,
Philippe Mathieu-Daudé <=
Re: [PATCH 00/19] hw/arm/raspi: Improve Raspberry Pi 2/3 reliability, BALATON Zoltan, 2019/09/26