[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [PATCH for-5.0 v11 00/20] VIRTIO-IOMMU device
From: |
Michael S. Tsirkin |
Subject: |
Re: [PATCH for-5.0 v11 00/20] VIRTIO-IOMMU device |
Date: |
Wed, 11 Dec 2019 11:40:12 -0500 |
On Fri, Nov 22, 2019 at 07:29:23PM +0100, Eric Auger wrote:
> This series implements the QEMU virtio-iommu device.
>
> This matches the v0.12 spec and the corresponding virtio-iommu
> driver upstreamed in 5.3.
>
> The pci proxy for the virtio-iommu device is instantiated using
> "-device virtio-iommu-pci". This series still relies on ACPI IORT/DT
> integration. Note the ACPI IORT integration is not yet upstreamed
> and testing needs to be based on Jean-Philippe's additional
> kernel patches [1].
Or the config space approach? I really liked that one.
>
> Work is ongoing to remove IORT adherence and allow the
> bindings between the IOMMU and the root complex to be defined
> and written into the PCI device configuration space. The outcome
> of this work is uncertain at this stage though. See [2].
>
> So only patches 1-11 fully rely on upstreamed kernel code. Others
> should be considered as RFC.
>
> This respin allows people to test on ARM and x86. It also
> brings migration support (tested on ARM) and various cleanups.
> Reserved regions are now passed through an array of properties.
> A libqos test also is introduced to test the virtio-iommu API.
>
> Note integration with vhost devices and vfio devices is not part
> of this series. Please follow Bharat's respins [3].
>
> The 1st Patch ("migration: Support QLIST migration") was sent
> separately [4].
>
> Best Regards
>
> Eric
>
> This series can be found at:
> https://github.com/eauger/qemu/tree/v4.2-rc2-virtio-iommu-v11
>
> [1] kernel branch to be used for guest
> https://github.com/eauger/linux/tree/v5.4-rc8-virtio-iommu-iort
> [2] [RFC 00/13] virtio-iommu on non-devicetree platforms
> [3] VFIO/VHOST integration is not part of this series. Please follow
> [PATCH RFC v5 0/5] virtio-iommu: VFIO integration respins
> [4] [PATCH v6] migration: Support QLIST migration
>
> Testing:
> - tested with guest using virtio-net-pci
> (,vhost=off,iommu_platform,disable-modern=off,disable-legacy=on)
> and virtio-blk-pci
> - migration on ARM
> - on x86 PC machine I get some AHCI non translated transactions,
> very early. This does not prevent the guest from boot and behaving
> properly. Warnings look like:
> qemu-system-x86_64: virtio_iommu_translate sid=250 is not known!!
> qemu-system-x86_64: no buffer available in event queue to report event
> qemu-system-x86_64: AHCI: Failed to start FIS receive engine: bad FIS
> receive buffer address
>
> History:
>
> v10 -> v11:
> - introduce virtio_iommu_handle_req macro
> - migration support
> - introduce DEFINE_PROP_INTERVAL and pass reserved regions
> through an array of those
> - domain gtree simplification
>
> v9 -> v10:
> - rebase on 4.1.0-rc2, compliance with 0.12 spec
> - removed ACPI part
> - cleanup (see individual change logs)
> - moved to a PATCH series
>
> v8 -> v9:
> - virtio-iommu-pci device needs to be instantiated from the command
> line (RID is not imposed anymore).
> - tail structure properly initialized
>
> v7 -> v8:
> - virtio-iommu-pci added
> - virt instantiation modified
> - DT and ACPI modified to exclude the iommu RID from the mapping
> - VIRTIO_IOMMU_F_BYPASS, VIRTIO_F_VERSION_1 features exposed
>
> v6 -> v7:
> - rebase on qemu 3.0.0-rc3
> - minor update against v0.7
> - fix issue with EP not on pci.0 and ACPI probing
> - change the instantiation method
>
> v5 -> v6:
> - minor update against v0.6 spec
> - fix g_hash_table_lookup in virtio_iommu_find_add_as
> - replace some error_reports by qemu_log_mask(LOG_GUEST_ERROR, ...)
>
> v4 -> v5:
> - event queue and fault reporting
> - we now return the IOAPIC MSI region if the virtio-iommu is instantiated
> in a PC machine.
> - we bypass transactions on MSI HW region and fault on reserved ones.
> - We support ACPI boot with mach-virt (based on IORT proposal)
> - We moved to the new driver naming conventions
> - simplified mach-virt instantiation
> - worked around the disappearing of pci_find_primary_bus
> - in virtio_iommu_translate, check the dev->as is not NULL
> - initialize as->device_list in virtio_iommu_get_as
> - initialize bufstate.error to false in virtio_iommu_probe
>
> v3 -> v4:
> - probe request support although no reserved region is returned at
> the moment
> - unmap semantics less strict, as specified in v0.4
> - device registration, attach/detach revisited
> - split into smaller patches to ease review
> - propose a way to inform the IOMMU mr about the page_size_mask
> of underlying HW IOMMU, if any
> - remove warning associated with the translation of the MSI doorbell
>
> v2 -> v3:
> - rebase on top of 2.10-rc0 and especially
> [PATCH qemu v9 0/2] memory/iommu: QOM'fy IOMMU MemoryRegion
> - add mutex init
> - fix as->mappings deletion using g_tree_ref/unref
> - when a dev is attached whereas it is already attached to
> another address space, first detach it
> - fix some error values
> - page_sizes = TARGET_PAGE_MASK;
> - I haven't changed the unmap() semantics yet, waiting for the
> next virtio-iommu spec revision.
>
> v1 -> v2:
> - fix redefinition of viommu_as typedef
>
>
>
> Eric Auger (20):
> migration: Support QLIST migration
> virtio-iommu: Add skeleton
> virtio-iommu: Decode the command payload
> virtio-iommu: Add the iommu regions
> virtio-iommu: Endpoint and domains structs and helpers
> virtio-iommu: Implement attach/detach command
> virtio-iommu: Implement map/unmap
> virtio-iommu: Implement translate
> virtio-iommu: Implement fault reporting
> virtio-iommu-pci: Add virtio iommu pci support
> hw/arm/virt: Add the virtio-iommu device tree mappings
> qapi: Introduce DEFINE_PROP_INTERVAL
> virtio-iommu: Implement probe request
> virtio-iommu: Handle reserved regions in the translation process
> virtio-iommu-pci: Add array of Interval properties
> hw/arm/virt-acpi-build: Introduce fill_iort_idmap helper
> hw/arm/virt-acpi-build: Add virtio-iommu node in IORT table
> virtio-iommu: Support migration
> pc: Add support for virtio-iommu-pci
> tests: Add virtio-iommu test
>
> hw/arm/virt-acpi-build.c | 91 ++-
> hw/arm/virt.c | 53 +-
> hw/core/qdev-properties.c | 90 +++
> hw/i386/acpi-build.c | 72 +++
> hw/i386/pc.c | 15 +-
> hw/virtio/Kconfig | 5 +
> hw/virtio/Makefile.objs | 2 +
> hw/virtio/trace-events | 22 +
> hw/virtio/virtio-iommu-pci.c | 91 +++
> hw/virtio/virtio-iommu.c | 952 +++++++++++++++++++++++++++++++
> include/exec/memory.h | 6 +
> include/hw/acpi/acpi-defs.h | 21 +-
> include/hw/arm/virt.h | 2 +
> include/hw/i386/pc.h | 2 +
> include/hw/pci/pci.h | 1 +
> include/hw/qdev-properties.h | 3 +
> include/hw/virtio/virtio-iommu.h | 67 +++
> include/migration/vmstate.h | 21 +
> include/qemu/queue.h | 39 ++
> include/qemu/typedefs.h | 1 +
> migration/trace-events | 5 +
> migration/vmstate-types.c | 70 +++
> qdev-monitor.c | 1 +
> tests/Makefile.include | 2 +
> tests/libqos/virtio-iommu.c | 177 ++++++
> tests/libqos/virtio-iommu.h | 45 ++
> tests/test-vmstate.c | 170 ++++++
> tests/virtio-iommu-test.c | 261 +++++++++
> 28 files changed, 2253 insertions(+), 34 deletions(-)
> create mode 100644 hw/virtio/virtio-iommu-pci.c
> create mode 100644 hw/virtio/virtio-iommu.c
> create mode 100644 include/hw/virtio/virtio-iommu.h
> create mode 100644 tests/libqos/virtio-iommu.c
> create mode 100644 tests/libqos/virtio-iommu.h
> create mode 100644 tests/virtio-iommu-test.c
>
> --
> 2.20.1
- Re: [PATCH for-5.0 v11 00/20] VIRTIO-IOMMU device,
Michael S. Tsirkin <=