qemu-arm
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [PATCH v4 5/7] tests/boot_linux_console: Test booting U-Boot on the


From: Thomas Huth
Subject: Re: [PATCH v4 5/7] tests/boot_linux_console: Test booting U-Boot on the Raspberry Pi 2
Date: Mon, 27 Jan 2020 17:15:10 +0100
User-agent: Mozilla/5.0 (X11; Linux x86_64; rv:60.0) Gecko/20100101 Thunderbird/60.9.0

On 27/01/2020 17.09, Philippe Mathieu-Daudé wrote:
> On 1/27/20 5:02 PM, Thomas Huth wrote:
>> On 21/01/2020 00.51, Philippe Mathieu-Daudé wrote:
>>> This test runs U-Boot on the Raspberry Pi 2.
>>> It is very simple and fast:
>>>
>>>    $ avocado --show=app,console run -t raspi2 -t u-boot
>>> tests/acceptance/
>>>    JOB LOG    : avocado/job-results/job-2020-01-20T23.40-2424777/job.log
>>>     (1/1)
>>> tests/acceptance/boot_linux_console.py:BootLinuxConsole.test_arm_raspi2_uboot:
>>>
>>>    console: MMC:   sdhci@7e300000: 0
>>>    console: Loading Environment from FAT... Card did not respond to
>>> voltage select!
>>>    console: In:    serial
>>>    console: Out:   vidconsole
>>>    console: Err:   vidconsole
>>>    console: Net:   No ethernet found.
>>>    console: starting USB...
>>>    console: USB0:   Port not available.
>>>    console: Hit any key to stop autoboot:  0
>>>    console: U-Boot>
>>>    console: U-Boot> bdinfo
>>>    console: arch_number = 0x00000000
>>>    console: boot_params = 0x00000100
>>>    console: DRAM bank   = 0x00000000
>>>    console: -> start    = 0x00000000
>>>    console: -> size     = 0x3c000000
>>>    console: baudrate    = 115200 bps
>>>    console: TLB addr    = 0x3bff0000
>>>    console: relocaddr   = 0x3bf64000
>>>    console: reloc off   = 0x3bf5c000
>>>    console: irq_sp      = 0x3bb5fec0
>>>    console: sp start    = 0x3bb5feb0
>>>    console: Early malloc usage: 2a4 / 400
>>>    console: fdt_blob    = 0x3bfbdfb0
>>>    console: U-Boot> version
>>>    console: U-Boot 2019.01+dfsg-7 (May 14 2019 - 02:07:44 +0000)
>>>    console: gcc (Debian 8.3.0-7) 8.3.0
>>>    console: GNU ld (GNU Binutils for Debian) 2.31.1
>>>    console: U-Boot> reset
>>>    console: resetting ...
>>>    PASS (0.46 s)
>>>
>>> U-Boot is built by the Debian project, see:
>>> https://wiki.debian.org/InstallingDebianOn/Allwinner#Creating_a_bootable_SD_Card_with_u-boot
>>>
>>>
>>> Signed-off-by: Philippe Mathieu-Daudé <address@hidden>
>>> ---
>>>   tests/acceptance/boot_linux_console.py | 28 ++++++++++++++++++++++++++
>>>   1 file changed, 28 insertions(+)
>>>
>>> diff --git a/tests/acceptance/boot_linux_console.py
>>> b/tests/acceptance/boot_linux_console.py
>>> index e40b84651b..682b801b4f 100644
>>> --- a/tests/acceptance/boot_linux_console.py
>>> +++ b/tests/acceptance/boot_linux_console.py
>>
>> The file is called boot_*linux*_console.py ... so shouldn't tests that
>> don't use Linux rather go into another file instead?
>> Either machine_arm_raspi.py or maybe a boot_firmware_console.py file?
> 
> Yes I have a series ready splitting boot_linux_console.py per machines
> (as suggested machine_arm_raspi.py) not for consistency with fw/linux
> but because I'm tired of fixing conflicts while rebasing since months.

Ah, great, good idea. That will also make it easier to assign the files
to entries in MAINTAINERS, I guess.

 Thanks,
  Thomas




reply via email to

[Prev in Thread] Current Thread [Next in Thread]