[PATCH v3 4/5] hw/arm/fsl-imx6ul: Wire up USB controllers

[Guenter Roeck]

IMX6UL USB controllers are quite similar to IMX7 USB controllers.
Wire them up the same way.

The only real difference is that wiring up phy devices is necessary
to avoid phy reset timeouts in the Linux kernel.

Signed-off-by: Guenter Roeck <address@hidden>
---
v3: Wire up USB and USB PHY controllers in separate loops
    While the number of USB controllers matches the number of USB PHYs,
    they are logically different.
v2: Use USB PHY emulation

 hw/arm/fsl-imx6ul.c         | 35 +++++++++++++++++++++++++++++++++++
 include/hw/arm/fsl-imx6ul.h | 10 ++++++++++
 2 files changed, 45 insertions(+)

diff --git a/hw/arm/fsl-imx6ul.c b/hw/arm/fsl-imx6ul.c
index a0bcc6f895..99a5859a4e 100644
--- a/hw/arm/fsl-imx6ul.c
+++ b/hw/arm/fsl-imx6ul.c
@@ -20,6 +20,7 @@
 #include "qapi/error.h"
 #include "hw/arm/fsl-imx6ul.h"
 #include "hw/misc/unimp.h"
+#include "hw/usb/imx-usb-phy.h"
 #include "hw/boards.h"
 #include "sysemu/sysemu.h"
 #include "qemu/error-report.h"
@@ -133,6 +134,18 @@ static void fsl_imx6ul_init(Object *obj)
                               TYPE_IMX_ENET);
     }
 
+    /* USB */
+    for (i = 0; i < FSL_IMX6UL_NUM_USB_PHYS; i++) {
+        snprintf(name, NAME_SIZE, "usbphy%d", i);
+        sysbus_init_child_obj(obj, name, &s->usbphy[i], sizeof(s->usbphy[i]),
+                              TYPE_IMX_USBPHY);
+    }
+    for (i = 0; i < FSL_IMX6UL_NUM_USBS; i++) {
+        snprintf(name, NAME_SIZE, "usb%d", i);
+        sysbus_init_child_obj(obj, name, &s->usb[i], sizeof(s->usb[i]),
+                              TYPE_CHIPIDEA);
+    }
+
     /*
      * SDHCI
      */
@@ -456,6 +469,28 @@ static void fsl_imx6ul_realize(DeviceState *dev, Error 
**errp)
                                             FSL_IMX6UL_ENETn_TIMER_IRQ[i]));
     }
 
+    /* USB */
+    for (i = 0; i < FSL_IMX6UL_NUM_USB_PHYS; i++) {
+        object_property_set_bool(OBJECT(&s->usbphy[i]), true, "realized",
+                                 &error_abort);
+        sysbus_mmio_map(SYS_BUS_DEVICE(&s->usbphy[i]), 0,
+                        FSL_IMX6UL_USBPHY1_ADDR + i * 0x1000);
+    }
+
+    for (i = 0; i < FSL_IMX6UL_NUM_USBS; i++) {
+        static const int FSL_IMX6UL_USBn_IRQ[] = {
+            FSL_IMX6UL_USB1_IRQ,
+            FSL_IMX6UL_USB2_IRQ,
+        };
+        object_property_set_bool(OBJECT(&s->usb[i]), true, "realized",
+                                 &error_abort);
+        sysbus_mmio_map(SYS_BUS_DEVICE(&s->usb[i]), 0,
+                        FSL_IMX6UL_USBO2_USB_ADDR + i * 0x200);
+        sysbus_connect_irq(SYS_BUS_DEVICE(&s->usb[i]), 0,
+                           qdev_get_gpio_in(DEVICE(&s->a7mpcore),
+                                            FSL_IMX6UL_USBn_IRQ[i]));
+    }
+
     /*
      * USDHC
      */
diff --git a/include/hw/arm/fsl-imx6ul.h b/include/hw/arm/fsl-imx6ul.h
index 5a420785b9..1a0bab8daa 100644
--- a/include/hw/arm/fsl-imx6ul.h
+++ b/include/hw/arm/fsl-imx6ul.h
@@ -34,6 +34,8 @@
 #include "hw/sd/sdhci.h"
 #include "hw/ssi/imx_spi.h"
 #include "hw/net/imx_fec.h"
+#include "hw/usb/chipidea.h"
+#include "hw/usb/imx-usb-phy.h"
 #include "exec/memory.h"
 #include "cpu.h"
 
@@ -54,6 +56,8 @@ enum FslIMX6ULConfiguration {
     FSL_IMX6UL_NUM_I2CS         = 4,
     FSL_IMX6UL_NUM_ECSPIS       = 4,
     FSL_IMX6UL_NUM_ADCS         = 2,
+    FSL_IMX6UL_NUM_USB_PHYS     = 2,
+    FSL_IMX6UL_NUM_USBS         = 2,
 };
 
 typedef struct FslIMX6ULState {
@@ -77,6 +81,8 @@ typedef struct FslIMX6ULState {
     IMXFECState        eth[FSL_IMX6UL_NUM_ETHS];
     SDHCIState         usdhc[FSL_IMX6UL_NUM_USDHCS];
     IMX2WdtState       wdt[FSL_IMX6UL_NUM_WDTS];
+    IMXUSBPHYState     usbphy[FSL_IMX6UL_NUM_USB_PHYS];
+    ChipideaState      usb[FSL_IMX6UL_NUM_USBS];
     MemoryRegion       rom;
     MemoryRegion       caam;
     MemoryRegion       ocram;
@@ -145,6 +151,10 @@ enum FslIMX6ULMemoryMap {
     FSL_IMX6UL_EPIT2_ADDR           = 0x020D4000,
     FSL_IMX6UL_EPIT1_ADDR           = 0x020D0000,
     FSL_IMX6UL_SNVS_HP_ADDR         = 0x020CC000,
+    FSL_IMX6UL_USBPHY2_ADDR         = 0x020CA000,
+    FSL_IMX6UL_USBPHY2_SIZE         = (4 * 1024),
+    FSL_IMX6UL_USBPHY1_ADDR         = 0x020C9000,
+    FSL_IMX6UL_USBPHY1_SIZE         = (4 * 1024),
     FSL_IMX6UL_ANALOG_ADDR          = 0x020C8000,
     FSL_IMX6UL_CCM_ADDR             = 0x020C4000,
     FSL_IMX6UL_WDOG2_ADDR           = 0x020C0000,
-- 
2.17.1