qemu-arm
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[PATCH] hw/adc/stm32f2xx_adc: Correct memory region size and access size


From: Philippe Mathieu-Daudé
Subject: [PATCH] hw/adc/stm32f2xx_adc: Correct memory region size and access size
Date: Mon, 25 May 2020 13:08:00 +0200

The ADC region size is 256B, split as:
 - [0x00 - 0x4f] defined
 - [0x50 - 0xff] reserved

All registers are 32-bit (thus when the datasheet mentions the
last defined register is 0x4c, it means its address range is
0x4c .. 0x4f.

This model implementation is also 32-bit. Set MemoryRegionOps
'impl' fields.

See:
  'RM0033 Reference manual Rev 8', Table 10.13.18 "ADC register map".

Signed-off-by: Philippe Mathieu-Daudé <address@hidden>
---
 hw/adc/stm32f2xx_adc.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/hw/adc/stm32f2xx_adc.c b/hw/adc/stm32f2xx_adc.c
index 4f9d485ecf..5d834a98f6 100644
--- a/hw/adc/stm32f2xx_adc.c
+++ b/hw/adc/stm32f2xx_adc.c
@@ -278,7 +278,7 @@ static void stm32f2xx_adc_init(Object *obj)
     sysbus_init_irq(SYS_BUS_DEVICE(obj), &s->irq);
 
     memory_region_init_io(&s->mmio, obj, &stm32f2xx_adc_ops, s,
-                          TYPE_STM32F2XX_ADC, 0xFF);
+                          TYPE_STM32F2XX_ADC, 0x100);
     sysbus_init_mmio(SYS_BUS_DEVICE(obj), &s->mmio);
 }
 
-- 
2.21.3




reply via email to

[Prev in Thread] Current Thread [Next in Thread]