Hi,
Could you try maybe running OpenWRT instead of Armbian?
Best reregards ,
Strahinja
在 2023/3/9 4:47, Niek Linnenbank 写道:
> Hello Qianfan Zhao,
>
> Thanks for contributing this work to Qemu! With your contribution, we
> would get yet another Allwinner SoC supported, making it three in
> total (A10/H3/R40). That's great.
> My thoughts are that maybe we should try to re-use commonality between
> these SoCs where we can. Ofcourse, that may be difficult as the
> internals/peripherals of these SoCs often really are different.
>
> Your patches look good already, and I saw patches 02 and 03 are
> already merged too. I did a quick regression test with
> avocado for cubieboard/orangepi-pc with your patches applied and that
> went OK:
>
> $ ARMBIAN_ARTIFACTS_CACHED=yes AVOCADO_ALLOW_LARGE_STORAGE=yes
> ./build/tests/venv/bin/avocado --show=app,console run -t
> machine:orangepi-pc -t machine:cubieboard
> tests/avocado/boot_linux_console.py
> ...
> PASS (22.09 s)
> RESULTS : PASS 8 | ERROR 0 | FAIL 0 | SKIP 0 | WARN 0 | INTERRUPT 0
> | CANCEL 0
> JOB TIME : 169.73 s
>
> For now, I have only two suggestions for you to consider:
> 1) You could add a new acceptance test for the new bananapi board to
> ./tests/avocado/boot_linux_console.py.
> This helps in your current work to (re)test your code quickly, and
> after the code is merged it helps to keep to board working when other
> changes are done.
> 2) If time permits, it may be interesting to document your board for
> example in a new file at ./docs/system/arm/bananapi.rst
> If you do this, it will make the board a lot more valuable for
> other people to use, since you can add some basic instructions on how
> to use the board with qemu there.
> Additionally, it also helps yourself to store this information
> somewhere, since it can be easy to forget all the specific
> commands/flags/arguments and links to board specific images.
>
> Once you have progressed with your patches beyond the RFC stage, I'll
> try to find some time for a more detailed review of your patches.
Hi:
Thanks for yours guide. avocado test case and documents will be
introduced later.
My work are stucked when I am writting avocado test case due to the
armbian image with
linux 6.1 can't boot, the kernel paniced when loading hdmi driver:
[ 0.925906] sun8i-dw-hdmi 1ee0000.hdmi: supply hvcc not found, using
dummy regulator
Invalid read at addr 0x1EF002C, size 4, region '(null)', reason: rejected
[ 0.927444] 8<--- cut here ---
[ 0.927780] Unhandled fault: external abort on non-linefetch (0x008)
at 0xe091002c
[ 0.928250] [e091002c] *pgd=4100a811, *pte=01ef0653, *ppte=01ef0453
[ 0.929441] Internal error: : 8 [#1] SMP ARM
[ 0.929925] Modules linked in:
[ 0.930332] CPU: 3 PID: 52 Comm: kworker/u8:2 Not tainted
6.3.0-rc3-ge8d018dd0257 #217
[ 0.931082] Hardware name: Allwinner sun8i Family
[ 0.931630] Workqueue: events_unbound deferred_probe_work_func
[ 0.932443] PC is at regmap_mmio_read32le+0x8/0x14
[ 0.932888] LR is at regmap_mmio_read+0x38/0x54
All my work are based on linux 5.15 in the previous days, I will take
many times to solve this.
>
> Kind regards,
> Niek Linnenbank
>
> On Thu, Mar 2, 2023 at 12:41 PM <qianfanguijin@163.com> wrote:
>
> From: qianfan Zhao <qianfanguijin@163.com>
>
> v1: 2023-03-02
>
> The first three patches try fix allwinner i2c driver and I already
> send them
> as a standalone PR and can read it from:
>
> https://patchwork.kernel.org/project/qemu-devel/patch/20230220081252.25348-3-qianfanguijin@163.com/
>
> Hope that patch can merged first before this.
>
> The next patches will add allwinner R40 device support, including
> ccu, mmc, i2c,
> axp221 pmic, sdram controller, emac and gmac. Now the mainline
> u-boot and
> kernel can work fine (It doesn't support booting allwinner bsp
> code and there
> are no plans to support it now).
>
> qianfan Zhao (12):
> hw: allwinner-i2c: Make the trace message more readable
> hw: allwinner-i2c: Fix TWI_CNTR_INT_FLAG on SUN6i SoCs
> hw: arm: allwinner-h3: Fix and complete H3 i2c devices
> hw: arm: Add bananapi M2-Ultra and allwinner-r40 support
> hw/arm/allwinner-r40: add Clock Control Unit
> hw: allwinner-r40: Complete uart devices
> hw: arm: allwinner-r40: Add 5 TWI controllers
> hw/misc: AXP221 PMU Emulation
> hw/arm/allwinner-r40: add SDRAM controller device
> hw: sd: allwinner-sdhost: Add sun50i-a64 SoC support
> hw: arm: allwinner-r40: Fix the mmc controller's type
> hw: arm: allwinner-r40: Add emac and gmac support
>
> configs/devices/arm-softmmu/default.mak | 1 +
> hw/arm/Kconfig | 10 +
> hw/arm/allwinner-h3.c | 29 +-
> hw/arm/allwinner-r40.c | 555
> ++++++++++++++++++++++++
> hw/arm/bananapi_m2u.c | 128 ++++++
> hw/arm/meson.build | 1 +
> hw/i2c/allwinner-i2c.c | 136 +++++-
> hw/i2c/trace-events | 5 +-
> hw/misc/Kconfig | 4 +
> hw/misc/allwinner-r40-ccu.c | 207 +++++++++
> hw/misc/allwinner-r40-dramc.c | 499 +++++++++++++++++++++
> hw/misc/axp221.c | 196 +++++++++
> hw/misc/meson.build | 3 +
> hw/misc/trace-events | 19 +
> hw/sd/allwinner-sdhost.c | 70 ++-
> include/hw/arm/allwinner-h3.h | 6 +
> include/hw/arm/allwinner-r40.h | 148 +++++++
> include/hw/i2c/allwinner-i2c.h | 6 +
> include/hw/misc/allwinner-r40-ccu.h | 65 +++
> include/hw/misc/allwinner-r40-dramc.h | 108 +++++
> include/hw/sd/allwinner-sdhost.h | 9 +
> 21 files changed, 2191 insertions(+), 14 deletions(-)
> create mode 100644 hw/arm/allwinner-r40.c
> create mode 100644 hw/arm/bananapi_m2u.c
> create mode 100644 hw/misc/allwinner-r40-ccu.c
> create mode 100644 hw/misc/allwinner-r40-dramc.c
> create mode 100644 hw/misc/axp221.c
> create mode 100644 include/hw/arm/allwinner-r40.h
> create mode 100644 include/hw/misc/allwinner-r40-ccu.h
> create mode 100644 include/hw/misc/allwinner-r40-dramc.h
>
> --
> 2.25.1
>
>
>
> --
> Niek Linnenbank
>