qemu-block
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Qemu-block] [PATCH V2] block/iscsi: restore compatiblity with libis


From: Paolo Bonzini
Subject: Re: [Qemu-block] [PATCH V2] block/iscsi: restore compatiblity with libiscsi 1.9.0
Date: Fri, 26 Jun 2015 13:18:35 +0200
User-agent: Mozilla/5.0 (X11; Linux x86_64; rv:31.0) Gecko/20100101 Thunderbird/31.7.0

On 26/06/2015 12:18, Peter Lieven wrote:
> RHEL7 and others are stuck with libiscsi 1.9.0 since there
> unfortunately was an ABI breakage after that release.
> 
> Signed-off-by: Peter Lieven <address@hidden>
> ---
> v1->v2: - do not use reserved macro names [Paolo]
>         - change text in qemu-options.hx to "libiscsi 1.15.0 or greater"
> 
>  block/iscsi.c   |   32 +++++++++++++++++++++++++++-----
>  configure       |    6 +++---
>  qemu-options.hx |    3 ++-
>  3 files changed, 32 insertions(+), 9 deletions(-)
> 
> diff --git a/block/iscsi.c b/block/iscsi.c
> index f19a56a..fd4a66e 100644
> --- a/block/iscsi.c
> +++ b/block/iscsi.c
> @@ -168,6 +168,19 @@ static inline unsigned exp_random(double mean)
>      return -mean * log((double)rand() / RAND_MAX);
>  }
>  
> +/* SCSI_STATUS_TASK_SET_FULL and SCSI_STATUS_TIMEOUT were introduced
> + * in libiscsi 1.10.0 as part of an enum. The LIBISCSI_API_VERSION
> + * macro was introduced in 1.11.0. So use the API_VERSION macro as
> + * a hint that the macros are defined and define them ourselves
> + * otherwise to keep the required libiscsi version at 1.9.0 */
> +#if !defined(LIBISCSI_API_VERSION)
> +#define QEMU_SCSI_STATUS_TASK_SET_FULL  0x28
> +#define QEMU_SCSI_STATUS_TIMEOUT        0x0f000002
> +#else
> +#define QEMU_SCSI_STATUS_TASK_SET_FULL  SCSI_STATUS_TASK_SET_FULL
> +#define QEMU_SCSI_STATUS_TIMEOUT        SCSI_STATUS_TIMEOUT
> +#endif
> +
>  static void
>  iscsi_co_generic_cb(struct iscsi_context *iscsi, int status,
>                          void *command_data, void *opaque)
> @@ -188,11 +201,12 @@ iscsi_co_generic_cb(struct iscsi_context *iscsi, int 
> status,
>                  iTask->do_retry = 1;
>                  goto out;
>              }
> -            if (status == SCSI_STATUS_BUSY || status == SCSI_STATUS_TIMEOUT 
> ||
> -                status == SCSI_STATUS_TASK_SET_FULL) {
> +            if (status == SCSI_STATUS_BUSY ||
> +                status == QEMU_SCSI_STATUS_TIMEOUT ||
> +                status == QEMU_SCSI_STATUS_TASK_SET_FULL) {
>                  unsigned retry_time =
>                      exp_random(iscsi_retry_times[iTask->retries - 1]);
> -                if (status == SCSI_STATUS_TIMEOUT) {
> +                if (status == QEMU_SCSI_STATUS_TIMEOUT) {
>                      /* make sure the request is rescheduled AFTER the
>                       * reconnect is initiated */
>                      retry_time = EVENT_INTERVAL * 2;
> @@ -1358,7 +1372,7 @@ static int iscsi_open(BlockDriverState *bs, QDict 
> *options, int flags,
>      QemuOpts *opts;
>      Error *local_err = NULL;
>      const char *filename;
> -    int i, ret = 0;
> +    int i, ret = 0, timeout = 0;
>  
>      opts = qemu_opts_create(&runtime_opts, NULL, 0, &error_abort);
>      qemu_opts_absorb_qdict(opts, options, &local_err);
> @@ -1428,7 +1442,15 @@ static int iscsi_open(BlockDriverState *bs, QDict 
> *options, int flags,
>          goto out;
>      }
>  
> -    iscsi_set_timeout(iscsi, parse_timeout(iscsi_url->target));
> +    /* timeout handling is broken in libiscsi before 1.15.0 */
> +    timeout = parse_timeout(iscsi_url->target);
> +#if defined(LIBISCSI_API_VERSION) && LIBISCSI_API_VERSION >= 20150621
> +    iscsi_set_timeout(iscsi, timeout);
> +#else
> +    if (timeout) {
> +        error_report("iSCSI: ignoring timeout value for libiscsi <1.15.0");
> +    }
> +#endif
>  
>      if (iscsi_full_connect_sync(iscsi, iscsi_url->portal, iscsi_url->lun) != 
> 0) {
>          error_setg(errp, "iSCSI: Failed to connect to LUN : %s",
> diff --git a/configure b/configure
> index 2ed9db2..222694f 100755
> --- a/configure
> +++ b/configure
> @@ -3660,15 +3660,15 @@ if compile_prog "" "" ; then
>  fi
>  
>  ##########################################
> -# Do we have libiscsi >= 1.10.0
> +# Do we have libiscsi >= 1.9.0
>  if test "$libiscsi" != "no" ; then
> -  if $pkg_config --atleast-version=1.10.0 libiscsi; then
> +  if $pkg_config --atleast-version=1.9.0 libiscsi; then
>      libiscsi="yes"
>      libiscsi_cflags=$($pkg_config --cflags libiscsi)
>      libiscsi_libs=$($pkg_config --libs libiscsi)
>    else
>      if test "$libiscsi" = "yes" ; then
> -      feature_not_found "libiscsi" "Install libiscsi >= 1.10.0"
> +      feature_not_found "libiscsi" "Install libiscsi >= 1.9.0"
>      fi
>      libiscsi="no"
>    fi
> diff --git a/qemu-options.hx b/qemu-options.hx
> index ca37481..389cf64 100644
> --- a/qemu-options.hx
> +++ b/qemu-options.hx
> @@ -2293,7 +2293,8 @@ line or a configuration file.
>  
>  Since version Qemu 2.4 it is possible to specify a iSCSI request timeout to 
> detect
>  stalled requests and force a reestablishment of the session. The timeout
> -is specified in seconds. The default is 0 which means no timeout.
> +is specified in seconds. The default is 0 which means no timeout. Libiscsi
> +1.15.0 or greater is required for this feature.
>  
>  Example (without authentication):
>  @example
> 

Reviewed-by: Paolo Bonzini <address@hidden>



reply via email to

[Prev in Thread] Current Thread [Next in Thread]