[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Qemu-block] [PATCH v2 11/14] ICH9 LPC: move call of isa_bus_irqs to 're

From: Efimov Vasily
Subject: [Qemu-block] [PATCH v2 11/14] ICH9 LPC: move call of isa_bus_irqs to 'realize' method
Date: Wed, 22 Jun 2016 15:24:55 +0300

The isa_bus_irqs function initializes ISA bus IRQ array pointer with specified

Previously the ICH9 LPC bridge model did not have its own IRQs but
only IRQ pointer cache. And same GSI were used for ISA bus and other sources
behind the bridge (PCI, SCI). Hence, the pc_q35_init was only possible place to
setup both ISA bus IRQs and the bridge IRQ cache.

As a result, the call of isa_bus_irqs was made from pc_q35_init.

Now the ICH9 LPC bridge has its own output IRQs which are connected to GSI. The
output IRQs are already used to route IRQs from PCI and SCI.

The patch makes the ICH9 LPC bridge output IRQs to used for ISA bus too.

Signed-off-by: Efimov Vasily <address@hidden>
 hw/i386/pc_q35.c  | 3 ---
 hw/isa/lpc_ich9.c | 2 ++
 2 files changed, 2 insertions(+), 3 deletions(-)

diff --git a/hw/i386/pc_q35.c b/hw/i386/pc_q35.c
index d3213fd..0f04c13 100644
--- a/hw/i386/pc_q35.c
+++ b/hw/i386/pc_q35.c
@@ -200,9 +200,6 @@ static void pc_q35_init(MachineState *machine)
     pci_bus_set_route_irq_fn(host_bus, ich9_route_intx_pin_to_irq);
     isa_bus = ich9_lpc->isa_bus;
-    /*end early*/
-    isa_bus_irqs(isa_bus, gsi);
     if (kvm_pic_in_kernel()) {
         i8259 = kvm_i8259_init(isa_bus);
     } else if (xen_enabled()) {
diff --git a/hw/isa/lpc_ich9.c b/hw/isa/lpc_ich9.c
index 36506ec..c351351 100644
--- a/hw/isa/lpc_ich9.c
+++ b/hw/isa/lpc_ich9.c
@@ -628,6 +628,8 @@ static void ich9_lpc_realize(PCIDevice *d, Error **errp)
     qdev_init_gpio_out_named(dev, lpc->gsi, ICH9_GPIO_GSI, GSI_NUM_PINS);
+    isa_bus_irqs(isa_bus, lpc->gsi);
 static bool ich9_rst_cnt_needed(void *opaque)

reply via email to

[Prev in Thread] Current Thread [Next in Thread]