qemu-block
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Qemu-block] [PATCH v3 8/8] hw: Drop superfluous special checks for


From: John Snow
Subject: Re: [Qemu-block] [PATCH v3 8/8] hw: Drop superfluous special checks for orphaned -drive
Date: Wed, 15 Feb 2017 15:32:12 -0500
User-agent: Mozilla/5.0 (X11; Linux x86_64; rv:45.0) Gecko/20100101 Thunderbird/45.7.0


On 02/15/2017 05:05 AM, Markus Armbruster wrote:
> We've traditionally rejected orphans here and there, but not
> systematically.  For instance, the sun4m machines have an onboard SCSI
> HBA (bus=0), and have always rejected bus>0.  Other machines with an
> onboard SCSI HBA don't.
> 
> Commit a66c9dc made all orphans trigger a warning, and the previous
> commit turned this into an error.  The checks "here and there" are now
> redundant.  Drop them.
> 
> Note that the one in mips_jazz.c was wrong: it rejected bus > MAX_FD,
> but MAX_FD is the number of floppy drives per bus.
> 
> Error messages change from
> 
>     $ qemu-system-x86_64 -drive if=ide,bus=2
>     qemu-system-x86_64: Too many IDE buses defined (3 > 2)
>     $ qemu-system-mips64 -M magnum,accel=qtest -drive if=floppy,bus=2,id=fd1
>     qemu: too many floppy drives
>     $ qemu-system-sparc -M LX -drive if=scsi,bus=1
>     qemu: too many SCSI bus
> 
> to
> 
>     $ qemu-system-x86_64 -drive if=ide,bus=2
>     qemu-system-x86_64: -drive if=ide,bus=2: machine type does not support 
> if=ide,bus=2,unit=0
>     $ qemu-system-mips64 -M magnum,accel=qtest -drive if=floppy,bus=2,id=fd1
>     qemu-system-mips64: -drive if=floppy,bus=2,id=fd1: machine type does not 
> support if=floppy,bus=2,unit=0
>     $ qemu-system-sparc -M LX -drive if=scsi,bus=1
>     qemu-system-sparc: -drive if=scsi,bus=1: machine type does not support 
> if=scsi,bus=1,unit=0
> 
> Cc: John Snow <address@hidden>
> Cc: "Hervé Poussineau" <address@hidden>
> Cc: Mark Cave-Ayland <address@hidden>
> Signed-off-by: Markus Armbruster <address@hidden>
> ---
>  hw/ide/core.c       | 17 -----------------
>  hw/mips/mips_jazz.c |  4 ----
>  hw/sparc/sun4m.c    |  5 -----
>  3 files changed, 26 deletions(-)
> 
> diff --git a/hw/ide/core.c b/hw/ide/core.c
> index 43709e5..cfa5de6 100644
> --- a/hw/ide/core.c
> +++ b/hw/ide/core.c
> @@ -2840,23 +2840,6 @@ const VMStateDescription vmstate_ide_bus = {
>  void ide_drive_get(DriveInfo **hd, int n)
>  {
>      int i;
> -    int highest_bus = drive_get_max_bus(IF_IDE) + 1;
> -    int max_devs = drive_get_max_devs(IF_IDE);
> -    int n_buses = max_devs ? (n / max_devs) : n;
> -
> -    /*
> -     * Note: The number of actual buses available is not known.
> -     * We compute this based on the size of the DriveInfo* array, n.
> -     * If it is less than max_devs * <num_real_buses>,
> -     * We will stop looking for drives prematurely instead of overfilling
> -     * the array.
> -     */
> -
> -    if (highest_bus > n_buses) {
> -        error_report("Too many IDE buses defined (%d > %d)",
> -                     highest_bus, n_buses);
> -        exit(1);
> -    }
>  
>      for (i = 0; i < n; i++) {
>          hd[i] = drive_get_by_index(IF_IDE, i);
> diff --git a/hw/mips/mips_jazz.c b/hw/mips/mips_jazz.c
> index 73f6c9f..1cef581 100644
> --- a/hw/mips/mips_jazz.c
> +++ b/hw/mips/mips_jazz.c
> @@ -291,10 +291,6 @@ static void mips_jazz_init(MachineState *machine,
>               qdev_get_gpio_in(rc4030, 5), &esp_reset, &dma_enable);
>  
>      /* Floppy */
> -    if (drive_get_max_bus(IF_FLOPPY) >= MAX_FD) {
> -        fprintf(stderr, "qemu: too many floppy drives\n");
> -        exit(1);
> -    }
>      for (n = 0; n < MAX_FD; n++) {
>          fds[n] = drive_get(IF_FLOPPY, 0, n);
>      }
> diff --git a/hw/sparc/sun4m.c b/hw/sparc/sun4m.c
> index f5b6efd..61416a6 100644
> --- a/hw/sparc/sun4m.c
> +++ b/hw/sparc/sun4m.c
> @@ -989,11 +989,6 @@ static void sun4m_hw_init(const struct sun4m_hwdef 
> *hwdef,
>      slavio_misc_init(hwdef->slavio_base, hwdef->aux1_base, hwdef->aux2_base,
>                       slavio_irq[30], fdc_tc);
>  
> -    if (drive_get_max_bus(IF_SCSI) > 0) {
> -        fprintf(stderr, "qemu: too many SCSI bus\n");
> -        exit(1);
> -    }
> -
>      esp_init(hwdef->esp_base, 2,
>               espdma_memory_read, espdma_memory_write,
>               espdma, espdma_irq, &esp_reset, &dma_enable);
> 

http://i.imgur.com/v1Lvzb1.jpg

Reviewed-by: John Snow <address@hidden>



reply via email to

[Prev in Thread] Current Thread [Next in Thread]